Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

3Jack_PassiveBoard(HWaveRectifier)

author: SJ-Effects
Top
Bottom

2 layer board of 0.63 x 1.59 inches (16.0 x 40.3 mm)
Uploaded: April 03, 2020
Shared: April 07, 2021
Total Price: $5.00

Passive Utilities: Half Wave Rectifier

Passive Utilities: Half Wave Rectifier

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Project Outputs for CanSatExtraXBEE

author: orcastro
Top
Bottom

2 layer board of 1.83 x 1.23 inches (46.5 x 31.3 mm)
Uploaded: April 07, 2021
Shared: April 07, 2021
Total Price: $11.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

KF BNC (4) Pin feedthrough to SMA PCB

author: acalvin
Top
Bottom

2 layer board of 1.10 x 1.10 inches (28.0 x 28.0 mm)
Uploaded: April 07, 2021
Shared: April 07, 2021
Total Price: $6.05

Strain relief for SMA cables connected to KF BNC feedthru with pin connectors on vacuum side. SMA PCB straight mount Mouser number: 530-1420701211

Strain relief for SMA cables connected to KF BNC feedthru with pin connectors on vacuum side. SMA PCB straight mount Mouser number: 530-1420701211

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Custom front label for Keysight InfiniiVision Oscilloscope

author: laen
Top
Bottom

2 layer board of 5.36 x 5.70 inches (136.1 x 144.7 mm)
Uploaded: April 06, 2021
Shared: April 06, 2021
Total Price: $152.55

For best results, use the “After Dark” order option.

Label elements are optimized for the Keysight InfiniiVision 3000T X-Series oscilloscopes, but will also fit 3000A and InfiniiVision 2000 X-Series oscilloscopes.

See the finished design here: https://youtu.be/0lomLQOFW8U

For best results, use the “After Dark” order option.

Label elements are optimized for the Keysight InfiniiVision 3000T X-Series oscilloscopes, but will also fit 3000A and InfiniiVision 2000 X-Series oscilloscopes.

See the finished design here: https://youtu.be/0lomLQOFW8U

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

audio.kicad_pcb

author: librehacker
Top
Bottom

2 layer board of 2.70 x 1.85 inches (68.7 x 47.1 mm)
Uploaded: March 24, 2021
Shared: April 06, 2021
Total Price: $25.00

Single Frequency Audio Output Module

Single Frequency Audio Output Module

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniProtoBoard_v4b.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 2.65 x 1.50 inches (67.4 x 38.2 mm)
Uploaded: March 02, 2021
Shared: April 06, 2021
Total Price: $19.90

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniProtoBoard

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniProtoBoard

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniRS232_v4a.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 2.88 x 1.50 inches (73.1 x 38.2 mm)
Uploaded: March 23, 2021
Shared: April 06, 2021
Total Price: $21.60

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniRS232

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniRS232

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniPoeCard_v4c.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 2.19 x 1.06 inches (55.7 x 27.0 mm)
Uploaded: March 23, 2021
Shared: April 06, 2021
Total Price: $11.65

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniPoeCard

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniPoeCard

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniNetCard_v4b.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 3.00 x 1.50 inches (76.3 x 38.2 mm)
Uploaded: February 25, 2021
Shared: April 06, 2021
Total Price: $22.55

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniNetCard

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniNetCard

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniFeatherAdapter_v4b.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 2.50 x 1.50 inches (63.6 x 38.2 mm)
Uploaded: March 19, 2021
Shared: April 06, 2021
Total Price: $18.80

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniFeatherAdapter

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniFeatherAdapter

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniDataLogger_v4b.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 2.80 x 1.50 inches (71.2 x 38.2 mm)
Uploaded: March 02, 2021
Shared: April 06, 2021
Total Price: $21.05

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniDataLogger

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniDataLogger

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Amiga 3000D ROMY

author: amiga.technology
Top
Bottom

2 layer board of 1.58 x 2.19 inches (40.2 x 55.6 mm)
Uploaded: April 06, 2021
Shared: April 06, 2021
Total Price: $17.30

ROMY (1MB ROM enabler) for Amiga 3000

This version features a PLCC plug and does not require soldering on the Amiga 3000 mainboard. Plug'n'Play, just like Zorro cards :)

https://github.com/reinauer/amiga-romy

ROMY (1MB ROM enabler) for Amiga 3000

This version features a PLCC plug and does not require soldering on the Amiga 3000 mainboard. Plug'n'Play, just like Zorro cards :)

https://github.com/reinauer/amiga-romy

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniZ21G18_v4b.kicad_pcb

author: Steve
Top
Bottom

2 layer board of 3.10 x 1.50 inches (78.8 x 38.2 mm)
Uploaded: March 16, 2021
Shared: April 06, 2021
Total Price: $23.30

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniZ21G18

alt text

This is released under CERN Open Hardware v.1.2 License.

Info at https://github.com/Sd4Projects/MiniZ21G18

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OttoWah

author: Heymor
Top
Bottom

2 layer board of 1.52 x 1.38 inches (38.7 x 35.1 mm)
Uploaded: April 05, 2021
Shared: April 06, 2021
Total Price: $10.50

A simple Auto-Wah pedal.

More details here on Github: https://github.com/Heymor/OttoWah

A simple Auto-Wah pedal.

More details here on Github: https://github.com/Heymor/OttoWah

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_PCB_IDC Extension_2021-04-05

author: BRIAN-lOUGH
Top
Bottom

2 layer board of 1.05 x 0.89 inches (26.7 x 22.6 mm)
Uploaded: April 05, 2021
Shared: April 05, 2021
Total Price: $4.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

relay_board_1x5 (2)

author: thatdecade
Top
Bottom

2 layer board of 2.30 x 1.45 inches (58.5 x 36.9 mm)
Uploaded: April 05, 2021
Shared: April 05, 2021
Total Price: $16.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Relay Board for Carlos N

author: thatdecade
Top
Bottom

2 layer board of 2.30 x 1.55 inches (58.5 x 39.4 mm)
Uploaded: April 05, 2021
Shared: April 05, 2021
Total Price: $17.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

handbot v1.0

author: snail
Top
Bottom

2 layer board of 0.50 x 0.50 inches (12.8 x 12.8 mm)
Uploaded: July 27, 2020
Shared: April 05, 2021
Total Price: $1.25

v1.0 of slave board for handbot

v1.0 of slave board for handbot

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FeatherLevelShifter 1.0

author: Hustin13
Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.9 x 22.9 mm)
Uploaded: April 05, 2021
Shared: April 05, 2021
Total Price: $9.00

Level shifter for AdaFruit Feather boards

Level shifter for AdaFruit Feather boards

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MC-1-7-6

author: ArduinoEnigma
Top
Bottom

2 layer board of 3.47 x 2.14 inches (88.0 x 54.2 mm)
Uploaded: April 05, 2021
Shared: April 05, 2021
Total Price: $36.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy