Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Temperature

author: Aerotusk
Top
Bottom

2 layer board of 0.27 x 0.25 inches (6.8 x 6.4 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $0.30

Breakout board for EMC1813

Breakout board for EMC1813

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Top Hat

author: Aerotusk
Top
Bottom

2 layer board of 0.95 x 2.80 inches (24.0 x 71.2 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $13.25

What does a Goose wear?

What does a Goose wear?

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB-osh

author: Aerotusk
Top
Bottom

2 layer board of 1.44 x 0.57 inches (36.6 x 14.6 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $4.10

Shoutout to OSHPark support for helping me get the slot drills working!

Shoutout to OSHPark support for helping me get the slot drills working!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LTC5553 Mixer board with LDO

author: rinatzakirov
Top
Bottom

4 layer board of 1.38 x 0.47 inches (35.0 x 12.0 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $6.50

LTC5553 Mixer board with LDO. Made RF and LO traces as short as possible to minimize losses as higher frequencies.

LTC5553 Mixer board with LDO. Made RF and LO traces as short as possible to minimize losses as higher frequencies.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Charging dock 2.1

author: Bluestaz
Top
Bottom

2 layer board of 3.60 x 0.72 inches (91.3 x 18.2 mm)
Uploaded: May 03, 2018
Shared: July 06, 2021
Total Price: $12.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DualScreenDSKY-b19

author: ArduinoEnigma
Top
Bottom

2 layer board of 5.32 x 5.59 inches (135.1 x 141.9 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $148.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

JJ_PCB v1_3

author: RachelResnick
Top
Bottom

2 layer board of 1.20 x 2.07 inches (30.5 x 52.5 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $12.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SRCx pcb

author: izidor
Top
Bottom

2 layer board of 1.12 x 0.69 inches (28.4 x 17.6 mm)
Uploaded: June 23, 2021
Shared: July 06, 2021
Total Price: $3.85

Srcx remplacement sip10 flipper williams system11

Srcx remplacement sip10 flipper williams system11

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Diode adapter

author: Jubal81
Top
Bottom

2 layer board of 0.40 x 0.26 inches (10.2 x 6.6 mm)
Uploaded: July 06, 2021
Shared: July 06, 2021
Total Price: $0.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RAK3172-Breakout

author: hallard
Top
Bottom

2 layer board of 1.97 x 0.92 inches (50.0 x 23.3 mm)
Uploaded: June 28, 2021
Shared: July 05, 2021
Total Price: $9.00

Check github project https://github.com/hallard/RAK3172-Breakout

Check github project https://github.com/hallard/RAK3172-Breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

expanseElectronics artNetNode (gen3)

author: LoneWalker
Top
Bottom

2 layer board of 3.39 x 1.11 inches (86.1 x 28.2 mm)
Uploaded: July 05, 2021
Shared: July 05, 2021
Total Price: $18.80

Mini Artnet DMX Nodes with WiFi Capability, RDM, Pixel FX and DMX Input support. Based on mtongnz's DMX library.

Purchase my node: https://www.tindie.com/products/lonewalker/wifi-artnet-dmx-node-gen3/

Mini Artnet DMX Nodes with WiFi Capability, RDM, Pixel FX and DMX Input support. Based on mtongnz's DMX library.

Purchase my node: https://www.tindie.com/products/lonewalker/wifi-artnet-dmx-node-gen3/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CVI06A

author: autotelic
Top
Bottom

2 layer board of 3.07 x 1.50 inches (78.0 x 38.0 mm)
Uploaded: January 27, 2020
Shared: July 05, 2021
Total Price: $22.95

Modern replacement for the CVI-06 memory expansion module. Needed to upgrade a CVI to Rev 7 software (final released version). This design also replaces the CVI-06 battery-backed SRAM with FRAM, which eliminates the need for a battery.

https://github.com/joebritt/Fairlight-CVI-Rev7-Upgrade

Modern replacement for the CVI-06 memory expansion module. Needed to upgrade a CVI to Rev 7 software (final released version). This design also replaces the CVI-06 battery-backed SRAM with FRAM, which eliminates the need for a battery.

https://github.com/joebritt/Fairlight-CVI-Rev7-Upgrade

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NoBattNVRAM

author: autotelic
Top
Bottom

2 layer board of 0.74 x 1.40 inches (18.8 x 35.6 mm)
Uploaded: February 02, 2020
Shared: July 05, 2021
Total Price: $5.15

Battery-free replacement for the 6264 SRAM used in the Fairlight CVI for internal non-volatile memory. When installed, the legacy battery should be removed. The FM1608 FRAM needs to have its chip select qualified with the E clock, so it always sees an edge before an access. The 74LS00 and "ECLK…

Show full description

Battery-free replacement for the 6264 SRAM used in the Fairlight CVI for internal non-volatile memory. When installed, the legacy battery should be removed. The FM1608 FRAM needs to have its chip select qualified with the E clock, so it always sees an edge before an access. The 74LS00 and "ECLK…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2716_adapter

author: autotelic
Top
Bottom

2 layer board of 1.32 x 1.20 inches (33.6 x 30.5 mm)
Uploaded: February 02, 2020
Shared: July 05, 2021
Total Price: $7.90

Replacement for the 2716 EPROMs in the Fairlight CVI. 2716 EPROMs are quite old now, and can be expensive and unreliable. I have a large number of PLCC32 OTP PROMs which can be used for the CVI Rev 7 upgrade.

https://github.com/joebritt/Fairlight-CVI-Rev7-Upgrade

Replacement for the 2716 EPROMs in the Fairlight CVI. 2716 EPROMs are quite old now, and can be expensive and unreliable. I have a large number of PLCC32 OTP PROMs which can be used for the CVI Rev 7 upgrade.

https://github.com/joebritt/Fairlight-CVI-Rev7-Upgrade

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

27C128_adapter

author: autotelic
Top
Bottom

2 layer board of 0.74 x 2.06 inches (18.8 x 52.4 mm)
Uploaded: February 02, 2020
Shared: July 05, 2021
Total Price: $7.60

Adapter to allow use of PLCC32 27C010 in place of DIP 27C128. I have a lot of PLCC32 27C010, this lets them be used for the Fairlight CVI Rev 7 upgrade.

https://github.com/joebritt/Fairlight-CVI-Rev7-Upgrade

Adapter to allow use of PLCC32 27C010 in place of DIP 27C128. I have a lot of PLCC32 27C010, this lets them be used for the Fairlight CVI Rev 7 upgrade.

https://github.com/joebritt/Fairlight-CVI-Rev7-Upgrade

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rodan.v01

author: PeskyProducts
Top
Bottom

4 layer board of 1.36 x 1.36 inches (34.5 x 34.5 mm)
Uploaded: July 05, 2021
Shared: July 05, 2021
Total Price: $18.40

STM32WB5MMG BLE-enabled host, 8 MB SPI flash memory, sensors, and solar cell charging for remote, connected environmental monitor.

STM32WB5MMG BLE-enabled host, 8 MB SPI flash memory, sensors, and solar cell charging for remote, connected environmental monitor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Genesis PLCC homebrew cart P1

author: rfmerrill
Top
Bottom

2 layer board of 3.30 x 1.70 inches (83.9 x 43.1 mm)
Uploaded: June 20, 2021
Shared: July 04, 2021
Total Price: $28.00

This allows you to use a pair of PLCC NOR FLASH EEPROMs for a genesis cart up to 1 megabyte. The advantage of this over existing solutions is that it fits in a regular genesis cart shell WITH sockets!

The two EEPROMs are SST39SF040-70-4C-NHE-T, which can be programmed using the widely availabl…

Show full description

This allows you to use a pair of PLCC NOR FLASH EEPROMs for a genesis cart up to 1 megabyte. The advantage of this over existing solutions is that it fits in a regular genesis cart shell WITH sockets!

The two EEPROMs are SST39SF040-70-4C-NHE-T, which can be programmed using the widely availabl…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TFR_BELSR_v2

author: TFRelectronics
Top
Bottom

2 layer board of 5.50 x 2.09 inches (139.8 x 53.0 mm)
Uploaded: July 04, 2021
Shared: July 04, 2021
Total Price: $57.35

Buffered Effects loop and Spring Reverb driver + recovery PCB. Designed to drop into a Laney AOR 50 or can be adapted for other projects.

See github for info: github.com/TFRelectronics/DIYGUITARPCBD…

Buffered Effects loop and Spring Reverb driver + recovery PCB. Designed to drop into a Laney AOR 50 or can be adapted for other projects.

See github for info: github.com/TFRelectronics/DIYGUITARPCBD…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Boss_fz2_clone_v2

author: TFRelectronics
Top
Bottom

2 layer board of 3.39 x 2.32 inches (86.0 x 59.0 mm)
Uploaded: July 04, 2021
Shared: July 04, 2021
Total Price: $39.30

BOSS FZ-2 Hyperfuzz PCB by me (Jon aka TFR Electronics). Boss switching and buffer on PCB.

See github for info: github.com/TFRelectronics/DIYGUITARPCBDOCS

BOSS FZ-2 Hyperfuzz PCB by me (Jon aka TFR Electronics). Boss switching and buffer on PCB.

See github for info: github.com/TFRelectronics/DIYGUITARPCBDOCS

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TF Amplifier v2

author: evgeny.redekop
Top
Bottom

2 layer board of 2.12 x 1.09 inches (53.8 x 27.8 mm)
Uploaded: July 03, 2021
Shared: July 03, 2021
Total Price: $11.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy