RGB Amp Rev. 1
author: treminaor
2 layer board of 2.71 x 2.16 inches (68.8 x 54.8 mm)
Uploaded:
January 24, 2021
Shared:
February 06, 2021
Total Price:
$29.15
RGB Amplifier for injection into CRTs which require signal levels above the standard 0.7-1vpp. Has gain/bias and drive adjustments for getting the perfect signal amplification for most jungle chips that require amplified signals from the OSD inputs.
RGB Amplifier for injection into CRTs which require signal levels above the standard 0.7-1vpp. Has gain/bias and drive adjustments for getting the perfect signal amplification for most jungle chips that require amplified signals from the OSD inputs.
Multicomp_LCR_4Wire
author: Fmilburn
2 layer board of 2.37 x 1.38 inches (60.1 x 35.0 mm)
Uploaded:
January 25, 2021
Shared:
February 06, 2021
Total Price:
$16.30
An adapter for the Multicomp Pro Handheld LCR Meter for 4-wire measurement of SMD or construction of Kelvin tweezers / probe
An adapter for the Multicomp Pro Handheld LCR Meter for 4-wire measurement of SMD or construction of Kelvin tweezers / probe
radpc_rpi_raven_interface_shield
author: Justin_P_Williams
2 layer board of 2.57 x 2.22 inches (65.3 x 56.3 mm)
Uploaded:
February 06, 2021
Shared:
February 06, 2021
Total Price:
$28.45
Yubikey C-To-A adapter v2
author: rfmerrill
4 layer board of 0.99 x 0.56 inches (25.2 x 14.1 mm)
Uploaded:
February 04, 2021
Shared:
February 04, 2021
Total Price:
$5.50
A compact and light adapter allowing you to use a Yubikey 5c as conveniently as the classic Yubikey.
Requires two resistors and a USB C port, plus a non-conductive spacer for fit.
The USB C connector I used is GCT USB4085-GF-A (DigiKey part 2073-USB4085-GF-ACT-ND). The two resistors are 56k…
Show full description
A compact and light adapter allowing you to use a Yubikey 5c as conveniently as the classic Yubikey.
Requires two resistors and a USB C port, plus a non-conductive spacer for fit.
The USB C connector I used is GCT USB4085-GF-A (DigiKey part 2073-USB4085-GF-ACT-ND). The two resistors are 56k…
Show full description
MotionLoggerWithSD
author: kevin311
4 layer board of 1.11 x 1.46 inches (28.1 x 37.1 mm)
Uploaded:
February 04, 2021
Shared:
February 04, 2021
Total Price:
$16.10
9 DOF motion logger with BNO085, SAMD21, micro SD, PAM8904E piezo buzzer controller, and DRV2605L vibration motor controller.
9 DOF motion logger with BNO085, SAMD21, micro SD, PAM8904E piezo buzzer controller, and DRV2605L vibration motor controller.
64K SRAM to FRAM adapter board v1.0
author: retro_amp
2 layer board of 1.47 x 0.74 inches (37.4 x 18.7 mm)
Uploaded:
June 07, 2019
Shared:
February 03, 2021
Total Price:
$5.40
This board will allow you to replace the 64K volatile battery backed SRAM with non-volatile FRAM. Works with 64K SRAM SNES Boards only.
Must be ordered using 2oz Cu option for 0.8mm thickness to ensure proper fitment. Please note you will also need to provide your own 2.54mm headers.
Parts …
Show full description
This board will allow you to replace the 64K volatile battery backed SRAM with non-volatile FRAM. Works with 64K SRAM SNES Boards only.
Must be ordered using 2oz Cu option for 0.8mm thickness to ensure proper fitment. Please note you will also need to provide your own 2.54mm headers.
Parts …
Show full description
16K SRAM to FRAM adapter board v1.2
author: retro_amp
2 layer board of 1.27 x 0.74 inches (32.3 x 18.7 mm)
Uploaded:
June 07, 2019
Shared:
February 03, 2021
Total Price:
$4.65
This board will allow you to replace the 16K volatile battery backed SRAM with non-volatile FRAM. Works with 16K SRAM SNES Boards only.
Must be ordered using 2oz Cu option for 0.8mm thickness to ensure proper fitment. Please note you will also need to provide your own 2.54mm headers.
Parts …
Show full description
This board will allow you to replace the 16K volatile battery backed SRAM with non-volatile FRAM. Works with 16K SRAM SNES Boards only.
Must be ordered using 2oz Cu option for 0.8mm thickness to ensure proper fitment. Please note you will also need to provide your own 2.54mm headers.
Parts …
Show full description
TinyG Switch Board.kicad_pcb
author: bjweinberg
2 layer board of 0.59 x 0.73 inches (15.1 x 18.6 mm)
Uploaded:
January 04, 2021
Shared:
February 03, 2021
Total Price:
$2.15
For TinyG controller in Liteplacer Pick & Place for switching between Liteplacer and OpenPNP software. Uses NKK G22AP switch and Wanjie WJ350-3.5 screw terminals.
For TinyG controller in Liteplacer Pick & Place for switching between Liteplacer and OpenPNP software. Uses NKK G22AP switch and Wanjie WJ350-3.5 screw terminals.
TinyG 2 Pin Adaptor Rev A.kicad_pcb
author: bjweinberg
2 layer board of 0.49 x 0.32 inches (12.5 x 8.0 mm)
Uploaded:
January 20, 2021
Shared:
February 03, 2021
Total Price:
$0.75
Power adapter for TinyG fan output pins. Allows for connecting up to 3x AWG24 conductors to each pin. Mounts upside-down on TinyG board. Uses Mill-Max 4280-0-43-80-16-80-10-0 open-ended pin sockets and Wanjie WJ350-3.5 screw terminal block.
Power adapter for TinyG fan output pins. Allows for connecting up to 3x AWG24 conductors to each pin. Mounts upside-down on TinyG board. Uses Mill-Max 4280-0-43-80-16-80-10-0 open-ended pin sockets and Wanjie WJ350-3.5 screw terminal block.
