Shared Projects

Shared Projects

Zworycam_Preamp.kicad_pcb

author: VideoLabGuy
Top
Bottom

2 layer board of 2.00 x 1.50 inches (50.8 x 38.1 mm)
Uploaded: July 07, 2025
Shared: July 07, 2025
Total Price: $15.00

This is a high gain video preamplifier suitable for use with an Iconoscope tube, like the 1846, 1848 or 1850. A more advanced hobbyist could adapt this amplifier for use with a vidicon tube relatively easily. This is one of a small set of boards for this project. There will also be a video sync g…

Show full description

This is a high gain video preamplifier suitable for use with an Iconoscope tube, like the 1846, 1848 or 1850. A more advanced hobbyist could adapt this amplifier for use with a vidicon tube relatively easily. This is one of a small set of boards for this project. There will also be a video sync g…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

thermocouple-feather rev0

author: mza
Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.8 x 22.9 mm)
Uploaded: July 14, 2024
Shared: July 06, 2025
Total Price: $9.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Software Defined Retro ROM (28 pin) rev A

author: piersfinlayson
Top
Bottom

2 layer board of 0.74 x 1.44 inches (18.9 x 36.6 mm)
Uploaded: July 03, 2025
Shared: July 05, 2025
Total Price: $5.35

This board is an untested prototype of a 28 pin version of SDRR, primarily designed to replace 23128 style ROMs (such as the combined kernal/BASIC ROM in the later C64s).

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 …

Show full description

This board is an untested prototype of a 28 pin version of SDRR, primarily designed to replace 23128 style ROMs (such as the combined kernal/BASIC ROM in the later C64s).

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Software Defined Retro ROM WiFi/BT rev A

author: piersfinlayson
Top
Bottom

2 layer board of 0.62 x 0.89 inches (15.8 x 22.7 mm)
Uploaded: July 02, 2025
Shared: July 05, 2025
Total Price: $2.75

This board is an untested prototype of a WiFi/Bluetooth programming daughterboard, designed to connect to the main SDRR, and reflash it vi WiFi/BT.

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the…

Show full description

This board is an untested prototype of a WiFi/Bluetooth programming daughterboard, designed to connect to the main SDRR, and reflash it vi WiFi/BT.

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Software Defined Retro ROM 24 pin rev F

author: piersfinlayson
Top
Bottom

2 layer board of 0.74 x 1.24 inches (18.9 x 31.6 mm)
Uploaded: July 05, 2025
Shared: July 05, 2025
Total Price: $4.60

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the STM32F4 family of microcontrollers.

See the project page for more details including firmware, schematics, BOM, fab no…

Show full description

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the STM32F4 family of microcontrollers.

See the project page for more details including firmware, schematics, BOM, fab no…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MBC1 (SRAM, Type A) v1.1

author: mousebitelabs
Top
Bottom

2 layer board of 2.09 x 2.44 inches (53.0 x 62.0 mm)
Uploaded: July 04, 2025
Shared: July 04, 2025
Total Price: $25.45

Board MUST be ordered at 0.8mm. Please review information at the GitHub before ordering.

https://github.com/MouseBiteLabs/Game-Boy-Cartridges/tree/main/MBC1%20(Type%20A%2C%20SRAM)

Board MUST be ordered at 0.8mm. Please review information at the GitHub before ordering.

https://github.com/MouseBiteLabs/Game-Boy-Cartridges/tree/main/MBC1%20(Type%20A%2C%20SRAM)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

impedenceBoard_REV1_fab

author: ple17
Top
Bottom

2 layer board of 6.00 x 4.00 inches (152.4 x 101.6 mm)
Uploaded: July 03, 2025
Shared: July 03, 2025
Total Price: $120.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Software Defined Retro ROM rev E

author: piersfinlayson
Top
Bottom

2 layer board of 0.74 x 1.24 inches (18.9 x 31.6 mm)
Uploaded: June 24, 2025
Shared: July 03, 2025
Total Price: $4.60

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the STM32F4 family of microcontrollers.

See the project page for more details including firmware, schematics, BOM, fab no…

Show full description

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the STM32F4 family of microcontrollers.

See the project page for more details including firmware, schematics, BOM, fab no…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tBoard_v_0_3

author: burntCrispy
Top
Bottom

2 layer board of 2.48 x 1.38 inches (63.0 x 35.0 mm)
Uploaded: July 02, 2025
Shared: July 02, 2025
Total Price: $17.05

Dumb tool board for Jubilee Baby Bullet.

Not Tested, should work with Baby Bullet + Orbiter 1.5 + E3D V6 Groovemount or Threaded Heatsink, Revo Micro should use v0_4 as fan connector is different

Uses Molex Micro-Fit 3.0:

  • 1x 430451200 12p right angle for input from controller
  • 1x 430251…

Show full description

Dumb tool board for Jubilee Baby Bullet.

Not Tested, should work with Baby Bullet + Orbiter 1.5 + E3D V6 Groovemount or Threaded Heatsink, Revo Micro should use v0_4 as fan connector is different

Uses Molex Micro-Fit 3.0:

  • 1x 430451200 12p right angle for input from controller
  • 1x 430251…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Capacitive Water Level Probe

author: SpuriousEmitter
Top
Bottom

2 layer board of 1.40 x 6.90 inches (35.6 x 175.3 mm)
Uploaded: November 20, 2021
Shared: July 02, 2025
Total Price: $48.30

Liquid level probe for monitoring the water level in my Christmas tree. Full project details in my blog post

Liquid level probe for monitoring the water level in my Christmas tree. Full project details in my blog post

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

angle_tracking-PTH

author: Acam1025
Top
Bottom

2 layer board of 0.26 x 0.47 inches (6.5 x 11.8 mm)
Uploaded: July 01, 2025
Shared: July 02, 2025
Total Price: $0.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Juki Internal NPS

author: Mr3D
Top
Bottom

2 layer board of 1.07 x 0.34 inches (27.1 x 8.6 mm)
Uploaded: July 28, 2024
Shared: June 30, 2025
Total Price: $1.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARINC_429_Test_board.kicad_pcb

author: ksterne
Top
Bottom

4 layer board of 5.00 x 3.50 inches (127.0 x 89.0 mm)
Uploaded: June 27, 2025
Shared: June 27, 2025
Total Price: $175.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4layer_transmit_receiver.kicad_pcb

author: josephn
Top
Bottom

4 layer board of 2.33 x 2.64 inches (59.2 x 67.0 mm)
Uploaded: June 26, 2025
Shared: June 26, 2025
Total Price: $61.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HolfuyFanetAdapter

author: mlohse
Top
Bottom

2 layer board of 2.58 x 1.07 inches (65.5 x 27.1 mm)
Uploaded: June 07, 2025
Shared: June 26, 2025
Total Price: $13.75

Adapter to install a Skytraxx FANET+ module into a Holfuy weather station (special firmware for the station needed!)

Adapter to install a Skytraxx FANET+ module into a Holfuy weather station (special firmware for the station needed!)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PLL_VT_EDU_4_Layer.kicad_pcb

author: josephn
Top
Bottom

4 layer board of 1.93 x 2.78 inches (49.1 x 70.7 mm)
Uploaded: June 26, 2025
Shared: June 26, 2025
Total Price: $53.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Software Defined Retro ROM rev D

author: piersfinlayson
Top
Bottom

2 layer board of 0.74 x 1.24 inches (18.9 x 31.6 mm)
Uploaded: May 21, 2025
Shared: June 26, 2025
Total Price: $4.60

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the STM32F4 family of microcontrollers.

See the project page for more details including firmware, schematics, BOM, fab no…

Show full description

Replace failed ROMs in Commodore 64s, VIC-20s, PETs, and other retro systems with a $2 microcontroller.

Emulates 2364, 2332 and 2316 ROMs using the STM32F4 family of microcontrollers.

See the project page for more details including firmware, schematics, BOM, fab no…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lnd150 pre rev4

author: MaxK
Top
Bottom

2 layer board of 1.18 x 0.78 inches (30.0 x 19.8 mm)
Uploaded: June 25, 2025
Shared: June 25, 2025
Total Price: $4.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lnd150 pre rev4

author: MaxK
Top
Bottom

2 layer board of 1.18 x 0.78 inches (30.0 x 19.8 mm)
Uploaded: June 25, 2025
Shared: June 25, 2025
Total Price: $4.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lnd150 pre rev3

author: MaxK
Top
Bottom

2 layer board of 1.18 x 0.78 inches (30.0 x 19.8 mm)
Uploaded: June 25, 2025
Shared: June 25, 2025
Total Price: $4.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy