Shared Projects by Helder

Shared Projects by Helder

Game Boy Pocket-BIVERT

2 layer board of 0.43 x 0.35 inches (10.9 x 8.9 mm)
Uploaded: February 23rd 2023
Shared: February 23rd 2023
Total Price: $0.75

2 cheap parts to build this for the Game Boy Pocket: 1x SN74LVC2GU04DBVR - SOT-23 - Dual Inverter Gate 1x Ceramic Capacitor - 100nF - 0805 - Decoupling Capacitor

Be sure to get this as a flex.

2 cheap parts to build this for the Game Boy Pocket: 1x SN74LVC2GU04DBVR - SOT-23 - Dual Inverter Gate 1x Ceramic Capacitor - 100nF - 0805 - Decoupling Capacitor

Be sure to get this as a flex.

Embeddable link to order this shared Project

GBC Bass Boost For Chip Tunes

2 layer board of 0.80 x 0.69 inches (20.4 x 17.6 mm)
Uploaded: February 12th 2023
Shared: February 12th 2023
Total Price: $2.75

Uses two 4.7uf 6.3v or higher Tantalum Case C or D capacitors. Based on this Mod: https://chipmusic.org/forums/topic/14184/gbc-bass-mod-and-noise-filtering-mod-a-comprehensive-photo-guide/

Uses two 4.7uf 6.3v or higher Tantalum Case C or D capacitors. Based on this Mod: https://chipmusic.org/forums/topic/14184/gbc-bass-mod-and-noise-filtering-mod-a-comprehensive-photo-guide/

Embeddable link to order this shared Project

mintyPi v3.5 LCD Board

2 layer board of 2.72 x 1.96 inches (69.2 x 49.8 mm)
Uploaded: January 29th 2023
Shared: January 29th 2023
Total Price: $26.70

R1 - 3.3 ohm RESISTOR, THICK FILM, 3R3, 1%, 0.1W, 0603

CN2 - 10pin FPC Connector 1mm pitch

CN1 - FPC Top Contact, 45P 0.50mm pitch, Flip Top

Mode S1 6x6x2.5mm SMD Tactile Switch

R1 - 3.3 ohm RESISTOR, THICK FILM, 3R3, 1%, 0.1W, 0603

CN2 - 10pin FPC Connector 1mm pitch

CN1 - FPC Top Contact, 45P 0.50mm pitch, Flip Top

Mode S1 6x6x2.5mm SMD Tactile Switch

Embeddable link to order this shared Project

Game Boy DMG Headphone Board

2 layer board of 1.50 x 0.64 inches (38.1 x 16.2 mm)
Uploaded: July 14th 2021
Shared: July 14th 2021
Total Price: $4.75

Untested DMG headphone board by Rolf. I simple added some milling slots and redid the tracing so it's compliant with be manufacturable.

Untested DMG headphone board by Rolf. I simple added some milling slots and redid the tracing so it's compliant with be manufacturable.

Embeddable link to order this shared Project

rcp2n64rgb

2 layer board of 5.88 x 0.83 inches (149.4 x 21.0 mm)
Uploaded: July 6th 2021
Shared: July 7th 2021
Total Price: $24.35

This is for the N64 Advance by Borti, be sure to get the flex option when ordering and check his github for more info and parts BOM.

This is for the N64 Advance by Borti, be sure to get the flex option when ordering and check his github for more info and parts BOM.

Embeddable link to order this shared Project