Shared Projects by TFRelectronics

Shared Projects by TFRelectronics

TFR Hypofuzz

Top
Bottom

2 layer board of 2.60 x 1.97 inches (66.0 x 50.0 mm)
Uploaded: February 05, 2022
Shared: February 05, 2022
Total Price: $25.55

The Hypo Fuzz is a FZ-2 stripped down to just the "mid scooped" fuzz mode with opamps replacing the buffers and discreet opamp gain stage.

The Hypo Fuzz is a FZ-2 stripped down to just the "mid scooped" fuzz mode with opamps replacing the buffers and discreet opamp gain stage.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TFR_BELSR_v2

Top
Bottom

2 layer board of 5.50 x 2.09 inches (139.8 x 53.0 mm)
Uploaded: July 04, 2021
Shared: July 04, 2021
Total Price: $57.35

Buffered Effects loop and Spring Reverb driver + recovery PCB. Designed to drop into a Laney AOR 50 or can be adapted for other projects.

See github for info: github.com/TFRelectronics/DIYGUITARPCBD…

Buffered Effects loop and Spring Reverb driver + recovery PCB. Designed to drop into a Laney AOR 50 or can be adapted for other projects.

See github for info: github.com/TFRelectronics/DIYGUITARPCBD…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Boss_fz2_clone_v2

Top
Bottom

2 layer board of 3.39 x 2.32 inches (86.0 x 59.0 mm)
Uploaded: July 04, 2021
Shared: July 04, 2021
Total Price: $39.30

BOSS FZ-2 Hyperfuzz PCB by me (Jon aka TFR Electronics). Boss switching and buffer on PCB.

See github for info: github.com/TFRelectronics/DIYGUITARPCBDOCS

BOSS FZ-2 Hyperfuzz PCB by me (Jon aka TFR Electronics). Boss switching and buffer on PCB.

See github for info: github.com/TFRelectronics/DIYGUITARPCBDOCS

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Musicman_preamp

Top
Bottom

2 layer board of 3.94 x 1.91 inches (100.0 x 48.5 mm)
Uploaded: July 03, 2021
Shared: July 03, 2021
Total Price: $37.60

Preamp section of a Musicman HD130 with some changes to be usable as a preamp pedal. By me (Jon aka TFR Electronics)

See below for info: github.com/TFRelectronics/DIYGUITARPCBDOCS tfrelectronics.com

Preamp section of a Musicman HD130 with some changes to be usable as a preamp pedal. By me (Jon aka TFR Electronics)

See below for info: github.com/TFRelectronics/DIYGUITARPCBDOCS tfrelectronics.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Acetone_fm2

Top
Bottom

2 layer board of 2.35 x 1.75 inches (59.7 x 44.4 mm)
Uploaded: July 03, 2021
Shared: July 03, 2021
Total Price: $20.55

PCB for the Acetone FM-2 (with some modifications) by me (Jon aka TFR Electronics)

See below for info: github.com/TFRelectronics/DIYGUITARPCBDOCS tfrelectronics.com

PCB for the Acetone FM-2 (with some modifications) by me (Jon aka TFR Electronics)

See below for info: github.com/TFRelectronics/DIYGUITARPCBDOCS tfrelectronics.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy