Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Sabrent_USB_Hub_touch_control_Gerber

author: AdamWu
Top
Bottom

2 layer board of 2.84 x 0.50 inches (72.1 x 12.7 mm)
Uploaded: March 21, 2021
Shared: March 21, 2021
Total Price: $7.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UniSolder52C_OLED

author: FriedEngineer
Top
Bottom

4 layer board of 1.15 x 0.88 inches (29.2 x 22.4 mm)
Uploaded: March 21, 2021
Shared: March 21, 2021
Total Price: $10.10

Back PCB for a Unisolder 5.2c Project also requires - Front and Back PCBs. Use this combined Back and OLED PCB to save on manufacturing.

Source: ht…

Show full description

Back PCB for a Unisolder 5.2c Project also requires - Front and Back PCBs. Use this combined Back and OLED PCB to save on manufacturing.

Source: ht…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UniSolder52C_back_OLED

author: FriedEngineer
Top
Bottom

4 layer board of 3.00 x 3.41 inches (76.2 x 86.7 mm)
Uploaded: March 21, 2021
Shared: March 21, 2021
Total Price: $102.40

Combined Back & OLED PCBs for a Unisolder 5.2c This is the combination of the Back and OLED PCBs. Project also requires - Front PCB.

Source: https:…

Show full description

Combined Back & OLED PCBs for a Unisolder 5.2c This is the combination of the Back and OLED PCBs. Project also requires - Front PCB.

Source: https:…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UniSolder52C_back

author: FriedEngineer
Top
Bottom

4 layer board of 3.00 x 3.41 inches (76.2 x 86.7 mm)
Uploaded: March 21, 2021
Shared: March 21, 2021
Total Price: $102.40

Back PCB for a Unisolder 5.2c Project also requires - Front and OLED PCBs. Use this combined Back and OLED PCB to save on manufacturing.

Source: ht…

Show full description

Back PCB for a Unisolder 5.2c Project also requires - Front and OLED PCBs. Use this combined Back and OLED PCB to save on manufacturing.

Source: ht…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UniSolder52C_front

author: FriedEngineer
Top
Bottom

4 layer board of 3.16 x 2.57 inches (80.2 x 65.2 mm)
Uploaded: March 21, 2021
Shared: March 21, 2021
Total Price: $81.00

Front PCB for a Unisolder 5.2c Project also requires - Back and OLED PCBs. Use this combined Back and OLED PCB to save on manufacturing.

Source: htt…

Show full description

Front PCB for a Unisolder 5.2c Project also requires - Back and OLED PCBs. Use this combined Back and OLED PCB to save on manufacturing.

Source: htt…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tuning fork amp V2

author: evgeny.redekop
Top
Bottom

2 layer board of 1.02 x 0.97 inches (25.9 x 24.6 mm)
Uploaded: March 20, 2021
Shared: March 20, 2021
Total Price: $4.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FeatherWing Display Holder

author: AirHeadBit
Top
Bottom

2 layer board of 2.11 x 2.41 inches (53.5 x 61.1 mm)
Uploaded: March 20, 2021
Shared: March 20, 2021
Total Price: $25.30

FeatherWing Doubler with one set of connectors flipped to support Adafruit Displays with soldered on female connectors like - 4777 eInk Grayscale FeatherWing : Use male header pins on the Display section and female non-stacked headers on the Feather section.

FeatherWing Doubler with one set of connectors flipped to support Adafruit Displays with soldered on female connectors like - 4777 eInk Grayscale FeatherWing : Use male header pins on the Display section and female non-stacked headers on the Feather section.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PicoProducer.kicad_pcb

author: pete_codes
Top
Bottom

2 layer board of 3.15 x 2.40 inches (80.1 x 61.1 mm)
Uploaded: February 21, 2021
Shared: March 20, 2021
Total Price: $37.90

Pico Producer PCB v1

A Raspberry Pi Pico based HID Macro Keyboard.

Find the full details in the GitHub repo here;

https://github.com/pjgpetecodes/pico-streamdeck

Pico Producer PCB v1

A Raspberry Pi Pico based HID Macro Keyboard.

Find the full details in the GitHub repo here;

https://github.com/pjgpetecodes/pico-streamdeck

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

H-Bridge Motor Controller

author: Tommy
Top
Bottom

2 layer board of 2.17 x 1.42 inches (55.1 x 36.1 mm)
Uploaded: February 27, 2021
Shared: March 20, 2021
Total Price: $15.40

H-bridge motor controller designed for use with a PWM signal from Arduino or similar. This was designed to drive a model train set and switch direction of the loco.

  • I have used 4x RFD14N05 N-MOS FETs. (<https://www.digikey.com.au/product-detail/en/on-semiconductor/RFD14N05LSM9A/RFD14N05LSM9A…

Show full description

H-bridge motor controller designed for use with a PWM signal from Arduino or similar. This was designed to drive a model train set and switch direction of the loco.

  • I have used 4x RFD14N05 N-MOS FETs. (<https://www.digikey.com.au/product-detail/en/on-semiconductor/RFD14N05LSM9A/RFD14N05LSM9A…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

picodox-dev v0.0

author: netz
Top
Bottom

2 layer board of 1.50 x 2.23 inches (38.0 x 56.5 mm)
Uploaded: March 19, 2021
Shared: March 19, 2021
Total Price: $16.60

Based on RP2040_minimal, with the needed parts for an ergodox infinity style interconnect (hopefully).

Based on RP2040_minimal, with the needed parts for an ergodox infinity style interconnect (hopefully).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MQ2 Smoke Detector Arduino Shield

author: jdeguglielmo
Top
Bottom

2 layer board of 2.12 x 2.38 inches (53.9 x 60.5 mm)
Uploaded: March 19, 2021
Shared: March 19, 2021
Total Price: $25.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_MQ2 Smoke Detector Arduino Shield

author: jdeguglielmo
Top
Bottom

2 layer board of 2.12 x 2.38 inches (53.9 x 60.5 mm)
Uploaded: March 19, 2021
Shared: March 19, 2021
Total Price: $25.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

gps_power

author: jhendrix
Top
Bottom

2 layer board of 0.40 x 0.25 inches (10.2 x 6.4 mm)
Uploaded: February 25, 2021
Shared: March 18, 2021
Total Price: $0.50

Uses BAS21C Common Cathode diode. Used to power GPS on a drone with a 1S battery before powering up the flight controller.

Uses BAS21C Common Cathode diode. Used to power GPS on a drone with a 1S battery before powering up the flight controller.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ads1015_rdivider_board

author: laughingman
Top
Bottom

2 layer board of 0.76 x 0.93 inches (19.2 x 23.7 mm)
Uploaded: March 18, 2021
Shared: March 18, 2021
Total Price: $3.50

ADS1015 breakout and 3 flex sensor rdivider circuit (Grove compatible)

ADS1015 breakout and 3 flex sensor rdivider circuit (Grove compatible)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

flextester-ohs21-rounded-cuts

author: fustini
Top
Bottom

2 layer board of 2.93 x 0.44 inches (74.5 x 11.1 mm)
Uploaded: March 03, 2021
Shared: March 18, 2021
Total Price: $6.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

P21521-finalPCB

author: axl1775
Top
Bottom

4 layer board of 2.81 x 3.61 inches (71.4 x 91.7 mm)
Uploaded: March 18, 2021
Shared: March 18, 2021
Total Price: $101.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SCART RGB TV Mod

author: Tianfeng
Top
Bottom

2 layer board of 2.59 x 0.97 inches (65.8 x 24.7 mm)
Uploaded: March 18, 2021
Shared: March 18, 2021
Total Price: $12.55

Untested I made this a while ago so people to use it to rgb mod thier tv's easily. It is based on this https://hackaday.io/project/170807-darthclouds-retro-gaming-room/log/175650-jvc-av-32920-crt-rgb-mod that was on shmups and uses the jungle chip injection. All the credit to them. I ha…

Show full description

Untested I made this a while ago so people to use it to rgb mod thier tv's easily. It is based on this https://hackaday.io/project/170807-darthclouds-retro-gaming-room/log/175650-jvc-av-32920-crt-rgb-mod that was on shmups and uses the jungle chip injection. All the credit to them. I ha…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3ATI_Power_BOARD

author: ChrisBailey
Top
Bottom

2 layer board of 1.19 x 1.50 inches (30.1 x 38.1 mm)
Uploaded: September 06, 2018
Shared: March 18, 2021
Total Price: $8.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MIT_WS_TEST_BOARD_REVA

author: ChrisBailey
Top
Bottom

2 layer board of 2.00 x 2.00 inches (50.9 x 50.9 mm)
Uploaded: November 26, 2018
Shared: March 18, 2021
Total Price: $20.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2CTRL-LED-TEST-BOARD-REVA

author: ChrisBailey
Top
Bottom

2 layer board of 2.76 x 3.00 inches (70.1 x 76.3 mm)
Uploaded: January 21, 2019
Shared: March 18, 2021
Total Price: $41.45

2ctrl-tb-revc-1-2.xln is the ncdrill file. 2 layer board with drill file.

2ctrl-tb-revc-1-2.xln is the ncdrill file. 2 layer board with drill file.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy