Shared Projects

Shared Projects

3CH RESISTANCE SWITCHER

author: TEMdude
Top
Bottom

2 layer board of 1.30 x 1.70 inches (33.0 x 43.2 mm)
Uploaded: February 19, 2018
Shared: February 19, 2018
Total Price: $11.05

Digital switching device for "R-Set" resistors. Designed for stepper drivers to switch from HIGH to IDLE current setting. Wire the outputs to the driver. Adjust the potentiometers to desired settings. Then, switch the resistance using digital input.

Digital switching device for "R-Set" resistors. Designed for stepper drivers to switch from HIGH to IDLE current setting. Wire the outputs to the driver. Adjust the potentiometers to desired settings. Then, switch the resistance using digital input.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MotivationalBoard

author: ArduinoEnigma
Top
Bottom

2 layer board of 5.01 x 5.48 inches (127.2 x 139.2 mm)
Uploaded: February 19, 2018
Shared: February 19, 2018
Total Price: $137.15

uses the switch linked below, 3mm LED and 1/8W resistors https://www.ebay.com/itm/50x-SPDT-3-Pin-Vertical-Slide-Switches-Mini-Panel-Circuit-PCB-Soldered-Tiny-1P2T/172796449184

uses the switch linked below, 3mm LED and 1/8W resistors https://www.ebay.com/itm/50x-SPDT-3-Pin-Vertical-Slide-Switches-Mini-Panel-Circuit-PCB-Soldered-Tiny-1P2T/172796449184

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32.D2WD.module.v01a

author: PeskyProducts
Top
Bottom

4 layer board of 0.50 x 0.63 inches (12.7 x 16.0 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $3.10

Added chip antenna.

Added chip antenna.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bml_pmod_to_hyperram_02

author: BlackMesaLabs
Top
Bottom

2 layer board of 1.51 x 0.43 inches (38.2 x 11.0 mm)
Uploaded: December 23, 2017
Shared: February 18, 2018
Total Price: $3.25

64Mbit HyperRAM to dual-PMOD 428-3856-ND S27KL0641DABHI020

64Mbit HyperRAM to dual-PMOD 428-3856-ND S27KL0641DABHI020

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2x5 leds with an Attiny85

author: PlacasMoradas
Top
Bottom

2 layer board of 1.42 x 2.33 inches (36.2 x 59.2 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $16.55

Two simple straights of 5 leds (10 leds 1206) controlated with a attiny85 (the version with legs, the only one I have)

Two simple straights of 5 leds (10 leds 1206) controlated with a attiny85 (the version with legs, the only one I have)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NeoGeo MV-1X Stereo Sound Mod PCB v1.0 (SMD)

author: n00b
Top
Bottom

2 layer board of 1.80 x 0.86 inches (45.8 x 21.9 mm)
Uploaded: February 09, 2018
Shared: February 18, 2018
Total Price: $7.75

NeoGeo MV-1X Stereo Sound Mod PCB v1.0 SMD

For further instrucions please visit circuit-board.de (German website).

NeoGeo MV-1X Stereo Sound Mod PCB v1.0 SMD

For further instrucions please visit circuit-board.de (German website).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bml_PAM2305D_1A_DCDC_01

author: BlackMesaLabs
Top
Bottom

2 layer board of 0.36 x 0.36 inches (9.0 x 9.0 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $0.60

1A DC/DC buck converter using PAM2305. 5V input to variable 1V to 3.3V output using 2.2uH to 4.7uH 0805 chip inductors. Pinout is standard 7805 TO-220.

1A DC/DC buck converter using PAM2305. 5V input to variable 1V to 3.3V output using 2.2uH to 4.7uH 0805 chip inductors. Pinout is standard 7805 TO-220.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

I2C_LED

author: wymand
Top
Bottom

2 layer board of 1.74 x 1.25 inches (44.2 x 31.8 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $10.85

Buffer board for an I2C GPIO board

Buffer board for an I2C GPIO board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4x5.kicad_pcb

author: netz
Top
Bottom

2 layer board of 4.34 x 3.20 inches (110.2 x 81.2 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $69.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Matrix MIDI Encoder

author: jkinkennon
Top
Bottom

2 layer board of 5.50 x 3.79 inches (139.7 x 96.2 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $104.15

MIDI Encoder for matrix keyboard organs

MIDI Encoder for matrix keyboard organs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32.D2WD.module.v01

author: PeskyProducts
Top
Bottom

4 layer board of 0.50 x 0.63 inches (12.7 x 16.0 mm)
Uploaded: February 18, 2018
Shared: February 18, 2018
Total Price: $3.10

Small module (12.7 x 12.7 mm plus 3.3 x 12.7 mm for simple monopole antenna) for Espressif's ESP32 D2WD with 2 MByte embedded SPI NOR flash. Exposes 24 GPIOs to the user as back pads for surface mounting onto acceptor board.

Small module (12.7 x 12.7 mm plus 3.3 x 12.7 mm for simple monopole antenna) for Espressif's ESP32 D2WD with 2 MByte embedded SPI NOR flash. Exposes 24 GPIOs to the user as back pads for surface mounting onto acceptor board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB

author: reedosaki
Top
Bottom

2 layer board of 2.76 x 2.15 inches (70.2 x 54.5 mm)
Uploaded: February 06, 2018
Shared: February 17, 2018
Total Price: $29.60

CSULB EE470

CSULB EE470

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bml_xcl220_1v_1a_01

author: BlackMesaLabs
Top
Bottom

2 layer board of 0.31 x 0.36 inches (7.8 x 9.0 mm)
Uploaded: January 28, 2018
Shared: February 17, 2018
Total Price: $0.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CircuitBasics_Flasher

author: electricityforprogress
Top
Bottom

2 layer board of 1.82 x 2.22 inches (46.2 x 56.3 mm)
Uploaded: February 17, 2018
Shared: February 17, 2018
Total Price: $20.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TPS5430

author: dpaessler
Top
Bottom

2 layer board of 1.61 x 1.78 inches (40.8 x 45.2 mm)
Uploaded: January 31, 2018
Shared: February 17, 2018
Total Price: $14.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueSaab v6.1

author: Edison517
Top
Bottom

2 layer board of 2.51 x 2.51 inches (63.7 x 63.7 mm)
Uploaded: February 17, 2018
Shared: February 17, 2018
Total Price: $31.45

This version incorporates a USB header for uploads, as well as FTDI/UART1.

This version incorporates a USB header for uploads, as well as FTDI/UART1.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RaspNRF24-V3

author: GertSanders
Top
Bottom

2 layer board of 1.40 x 0.75 inches (35.6 x 19.0 mm)
Uploaded: February 17, 2018
Shared: February 17, 2018
Total Price: $5.25

This board uses the default wiring as specified on the MySensors page: https://www.mysensors.org/build/raspberry#improving-throughput-for-nrf24

This board uses the default wiring as specified on the MySensors page: https://www.mysensors.org/build/raspberry#improving-throughput-for-nrf24

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Traffic Light V 2.17.18

author: Gwatson
Top
Bottom

2 layer board of 2.37 x 2.36 inches (60.1 x 60.0 mm)
Uploaded: February 17, 2018
Shared: February 17, 2018
Total Price: $27.90

Small Traffic Light controller

Small Traffic Light controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32DevBoard.v02a

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 1.41 inches (18.0 x 35.7 mm)
Uploaded: February 17, 2018
Shared: February 17, 2018
Total Price: $9.90

Added missing VUSB on STBC08 battery charger, corrected swapped RX/TX lines at the ESP32.

Added missing VUSB on STBC08 battery charger, corrected swapped RX/TX lines at the ESP32.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STLink Adapter

author: aberry
Top
Bottom

2 layer board of 1.02 x 1.74 inches (25.8 x 44.2 mm)
Uploaded: February 16, 2018
Shared: February 16, 2018
Total Price: $8.80

Plugs into an ST-Link V2 to convert the 100mil 20-pin header into a 100mil and 50mil 10-pin headers with standard SWD pinout. A reset switch and some test loops are also provided.

Because of the height of the header on the ST-Link relative to the housing, I recommend using a piece of ~1/16" o…

Show full description

Plugs into an ST-Link V2 to convert the 100mil 20-pin header into a 100mil and 50mil 10-pin headers with standard SWD pinout. A reset switch and some test loops are also provided.

Because of the height of the header on the ST-Link relative to the housing, I recommend using a piece of ~1/16" o…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy