AD5933 breakout board
author: tkircher
2 layer board of 1.47 x 1.16 inches (37.3 x 29.4 mm)
Uploaded:
April 23, 2018
Shared:
April 23, 2018
Total Price:
$8.50
This is a fairly minimal breakout board for the AD5933, with an analog buffer front-end and optional on-board voltage regulator. The schematic is basically the one in the datasheet. Very similar to the Pmod IA. Uses uFL connectors to save space. Easy to drive this from a RPi.
Part list:
| Part | Value | Footprint |
|---|---|---|
| C1 | 47nF | 0805 |
| C2, C25 | 0.1uF | 0805 |
| C3, C21, C26 | 1.0uF | 1206 |
| C20 | 0.01uF | 0805 |
| R1, R2, R6, R7 | 50k (49.9k) | 0805 |
| R4, R5 | 20k | 0805 |
| IC1 | AD5933 | SSOP-16 |
| IC2 | MCP1703 | SOT-23A |
| IC8 | AD8606 | SOIC-8 |
| J1, J2, J3 | uFL connector | uFL |
This is a fairly minimal breakout board for the AD5933, with an analog buffer front-end and optional on-board voltage regulator. The schematic is basically the one in the datasheet. Very similar to the Pmod IA. Uses uFL connectors to save space. Easy to drive this from a RPi.
Part list:
| Part | Value | Footprint |
|---|---|---|
| C1 | 47nF | 0805 |
| C2, C25 | 0.1uF | 0805 |
| C3, C21, C26 | 1.0uF | 1206 |
| C20 | 0.01uF | 0805 |
| R1, R2, R6, R7 | 50k (49.9k) | 0805 |
| R4, R5 | 20k | 0805 |
| IC1 | AD5933 | SSOP-16 |
| IC2 | MCP1703 | SOT-23A |
| IC8 | AD8606 | SOIC-8 |
| J1, J2, J3 | uFL connector | uFL |
