RFM23BP breakout
2 layer board of 2.20 x 1.25 inches (55.9 x 31.8 mm)
Uploaded:
December 16, 2021
Shared:
December 16, 2021
Total Price:
$13.75
This is a pretty simple breakout for the RFM23BP +30dBm 1W board. It's remixed from this one
This is a pretty simple breakout for the RFM23BP +30dBm 1W board. It's remixed from this one
Bipolar supply
2 layer board of 1.34 x 0.79 inches (34.1 x 20.1 mm)
Uploaded:
December 27, 2019
Shared:
December 27, 2019
Total Price:
$5.30
This is a +/-65V power supply from Linear Technology's LTC6090 datasheet
Part list:
| Part | Value | Footprint |
|---|---|---|
| IC1 | LT8300 | TSOT-23-5 |
| D1 | CMMR1U-02 | SOD-123 |
| D2 | CMMR1U-02 | SOD-123 |
| D3 | MMSZ5266BT1G | SOD-123 |
| T1 | … |
Show full description
This is a +/-65V power supply from Linear Technology's LTC6090 datasheet
Part list:
| Part | Value | Footprint |
|---|---|---|
| IC1 | LT8300 | TSOT-23-5 |
| D1 | CMMR1U-02 | SOD-123 |
| D2 | CMMR1U-02 | SOD-123 |
| D3 | MMSZ5266BT1G | SOD-123 |
| T1 | … |
Show full description
MAX1168_breakout
2 layer board of 1.08 x 1.06 inches (27.4 x 26.8 mm)
Uploaded:
April 26, 2018
Shared:
November 15, 2018
Total Price:
$5.65
A minimal breakout board for the MAX1168 8 channel, 16-bit ADC, based on the schematic in the datasheet. There's a solder jumper to pull DSEL either high or low. For 3.3v logic, a separate 5v analog supply can be connected at AVDD, leaving R1 unpopulated.
[Files on GitHub](https://github.com/t…
Show full description
A minimal breakout board for the MAX1168 8 channel, 16-bit ADC, based on the schematic in the datasheet. There's a solder jumper to pull DSEL either high or low. For 3.3v logic, a separate 5v analog supply can be connected at AVDD, leaving R1 unpopulated.
[Files on GitHub](https://github.com/t…
Show full description
Geiger_counter_HV_OSH_park
2 layer board of 1.66 x 1.05 inches (42.2 x 26.6 mm)
Uploaded:
November 14, 2018
Shared:
November 14, 2018
Total Price:
$8.65
This is the high-voltage section of the geiger counter. It's based on the kickback high voltage generator designed by Tom Napier and published in Nuts & Volts, January 2004. There are more straightforward designs based on inverters, but this has its own charm. It has also been time-tested, and is…
Show full description
This is the high-voltage section of the geiger counter. It's based on the kickback high voltage generator designed by Tom Napier and published in Nuts & Volts, January 2004. There are more straightforward designs based on inverters, but this has its own charm. It has also been time-tested, and is…
Show full description
