Shared Projects

Shared Projects

Dual Relay FeatherWing - PTH

author: Arudinne
Top
Bottom

2 layer board of 3.84 x 2.01 inches (97.4 x 51.0 mm)
Uploaded: December 03, 2017
Shared: June 11, 2019
Total Price: $38.45

FeatherWing for Adafruit Feathers to control two relays via I2C using an MCP23008. Component selection based on the Adafruit Power Relay FeatherWing, but modified to use through-hole components and the MCP23008.

Requires 5V in.

I recommend getting this printed using the 2oz Copper with 0.8…

Show full description

FeatherWing for Adafruit Feathers to control two relays via I2C using an MCP23008. Component selection based on the Adafruit Power Relay FeatherWing, but modified to use through-hole components and the MCP23008.

Requires 5V in.

I recommend getting this printed using the 2oz Copper with 0.8…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MEGA2560_Rev3e

author: ConnerMcLaughlin
Top
Bottom

2 layer board of 4.01 x 2.11 inches (101.9 x 53.6 mm)
Uploaded: June 10, 2019
Shared: June 10, 2019
Total Price: $42.30

Arduino Mega 2560 Rev3e in Eagle CAD. Heart of Speeduino Project

Arduino Mega 2560 Rev3e in Eagle CAD. Heart of Speeduino Project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino_MEGA_2560-Rev3

author: ConnerMcLaughlin
Top
Bottom

2 layer board of 4.01 x 2.11 inches (101.9 x 53.6 mm)
Uploaded: June 10, 2019
Shared: June 10, 2019
Total Price: $42.30

Arduino Mega 2560 Rev3 without the "e" in Eagle CAD. Heart of the Speeduino Project.

Arduino Mega 2560 Rev3 without the "e" in Eagle CAD. Heart of the Speeduino Project.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teeces PSI 3.4

author: JoyMonkey
Top
Bottom

2 layer board of 1.88 x 1.88 inches (47.8 x 47.8 mm)
Uploaded: June 09, 2019
Shared: June 09, 2019
Total Price: $17.65

Same basic circuit as Teeces PSI v3.2, but trace width has been increased.

Same basic circuit as Teeces PSI v3.2, but trace width has been increased.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Type 2 Simulator Interface Rev E

author: AndrewIC
Top
Bottom

2 layer board of 3.17 x 3.17 inches (80.4 x 80.4 mm)
Uploaded: June 09, 2019
Shared: June 09, 2019
Total Price: $50.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

K1FM Pico Balloon 1.3

author: k1fm
Top
Bottom

4 layer board of 1.05 x 1.62 inches (26.7 x 41.2 mm)
Uploaded: June 09, 2019
Shared: June 09, 2019
Total Price: $17.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SaveKeyPlus

author: Danjovic
Top
Bottom

2 layer board of 0.60 x 0.60 inches (15.3 x 15.3 mm)
Uploaded: June 08, 2019
Shared: June 09, 2019
Total Price: $1.80

SaveKey for Atari 2600 with extra EEPROM for double storage!

SaveKey for Atari 2600 with extra EEPROM for double storage!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

board.kicad_pcb 1.0

author: zapta
Top
Bottom

2 layer board of 1.96 x 1.41 inches (49.7 x 35.7 mm)
Uploaded: June 09, 2019
Shared: June 09, 2019
Total Price: $13.70

Duet3D status monitor rev 1.0

Duet3D status monitor rev 1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

magic-wand.kicad_pcb

author: captain_morgan
Top
Bottom

2 layer board of 0.79 x 3.31 inches (20.2 x 84.2 mm)
Uploaded: June 08, 2019
Shared: June 08, 2019
Total Price: $13.15

Control board for "Sprite Wand" https://hackaday.io/project/165714-sprite-wand

Control board for "Sprite Wand" https://hackaday.io/project/165714-sprite-wand

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

INTVAL 2.0

author: sixteenmillimeter
Top
Bottom

2 layer board of 1.33 x 0.71 inches (33.8 x 18.0 mm)
Uploaded: June 07, 2019
Shared: June 07, 2019
Total Price: $4.70

Trinket Pro 5V shield for the INTVAL 2.0 intervalometer for the Bolex 16mm movie camera.

Trinket Pro 5V shield for the INTVAL 2.0 intervalometer for the Bolex 16mm movie camera.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DENISE180

author: nonarkitten
Top
Bottom

2 layer board of 1.20 x 2.48 inches (30.5 x 63.0 mm)
Uploaded: June 07, 2019
Shared: June 07, 2019
Total Price: $14.85

Rotates the pin-out of Denise to allow Denise-based socket frame buffers and flicker fixers to fit within the Amiga 1000. This has been tested and works very well.

Rotates the pin-out of Denise to allow Denise-based socket frame buffers and flicker fixers to fit within the Amiga 1000. This has been tested and works very well.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tonemender

author: sogas
Top
Bottom

2 layer board of 2.24 x 1.30 inches (56.8 x 33.0 mm)
Uploaded: June 07, 2019
Shared: June 07, 2019
Total Price: $14.50

Tonemender EQ/Boost pedal by runoffgroove http://www.runoffgroove.com/tonemender.html

Tonemender EQ/Boost pedal by runoffgroove http://www.runoffgroove.com/tonemender.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

7seg_nenga

author: tamo
Top
Bottom

2 layer board of 1.70 x 0.60 inches (43.1 x 15.1 mm)
Uploaded: June 01, 2019
Shared: June 07, 2019
Total Price: $5.00

New Year Greeting in Japan

New Year Greeting in Japan

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breadboard BP-Proto, Rev.A

author: arduinopraxis
Top
Bottom

2 layer board of 1.46 x 2.17 inches (37.0 x 55.0 mm)
Uploaded: June 07, 2019
Shared: June 07, 2019
Total Price: $15.75

Breadboard Power Adapter with prototype area (BP-Proto, Rev.A)

Breadboard Power Adapter with prototype area (BP-Proto, Rev.A)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sensorboard_2019-06-07

author: atoy40
Top
Bottom

2 layer board of 2.11 x 2.42 inches (53.5 x 61.4 mm)
Uploaded: June 07, 2019
Shared: June 07, 2019
Total Price: $25.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SMS2Genesiscontroller

author: FrankStrasser
Top
Bottom

2 layer board of 5.13 x 2.03 inches (130.2 x 51.5 mm)
Uploaded: June 06, 2019
Shared: June 06, 2019
Total Price: $52.00

Same as my sms2nes controller just with some extras. To replace a genesis controller pcb to use a genesis controller on a master system and when used with my pause reset board can pause and reset from controller. Has jumpers for either using a and b as 1 and 2 with c as reset or b and c as 1 and …

Show full description

Same as my sms2nes controller just with some extras. To replace a genesis controller pcb to use a genesis controller on a master system and when used with my pause reset board can pause and reset from controller. Has jumpers for either using a and b as 1 and 2 with c as reset or b and c as 1 and …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Amplifier

author: JeremyKline
Top
Bottom

2 layer board of 2.41 x 1.31 inches (61.2 x 33.2 mm)
Uploaded: June 06, 2019
Shared: June 06, 2019
Total Price: $15.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

glitchysource v2

author: error404
Top
Bottom

2 layer board of 1.63 x 0.98 inches (41.4 x 24.8 mm)
Uploaded: December 29, 2018
Shared: June 06, 2019
Total Price: $7.90

doot

doot

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SMSPAUSEIGR2

author: FrankStrasser
Top
Bottom

2 layer board of 0.67 x 0.82 inches (17.1 x 20.9 mm)
Uploaded: June 06, 2019
Shared: June 06, 2019
Total Price: $2.75

Same as my other sms reset pause board but this one is beginner/intermediate level as you just solder it to the controller pins on the bottom of the board and solder pause and reset either from the switch pins on bottom or for pause you can take it from the vdp pause pin on bottom of board. For …

Show full description

Same as my other sms reset pause board but this one is beginner/intermediate level as you just solder it to the controller pins on the bottom of the board and solder pause and reset either from the switch pins on bottom or for pause you can take it from the vdp pause pin on bottom of board. For …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

16-Molex-Breakout.brd

author: bswisher96
Top
Bottom

2 layer board of 1.17 x 2.42 inches (29.6 x 61.4 mm)
Uploaded: October 03, 2016
Shared: June 06, 2019
Total Price: $14.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy