Op Amp Gain and Offset - ver. 1
2 layer board of 0.61 x 0.61 inches (15.5 x 15.5 mm)
Uploaded:
March 31st 2020
Shared:
March 31st 2020
Total Price:
$1.85
This single-supply (3.3V) inverting op amp transforms an input in the 0-4.5V range into a 100-900mV output. With S̅H̅D̅N̅ open or high, when IN = 4.5V, OUT ≈ 100mV and when IN = 0V, OUT ≈ 900mV.
Feel free to do with it whatever you want (public domain)
BOM
Q.ty | Value | Designation …
Show full description
This single-supply (3.3V) inverting op amp transforms an input in the 0-4.5V range into a 100-900mV output. With S̅H̅D̅N̅ open or high, when IN = 4.5V, OUT ≈ 100mV and when IN = 0V, OUT ≈ 900mV.
Feel free to do with it whatever you want (public domain)
BOM
Q.ty | Value | Designation …
Show full description
Adapter SOT-23-6 or TSOT-23-6 to DIP-6
2 layer board of 0.42 x 0.32 inches (10.7 x 8.2 mm)
Uploaded:
March 6th 2020
Shared:
March 9th 2020
Total Price:
$0.65
Not yet tested!
This small breakout board/adapter for SOT-23-6 or TSOT-23-6 allows to use SMDs for prototyping and/or with a breadboard. Indeed, the pin rows with pin spacing at 0.1 inches (2.54 mm) are 0.3 inches (7.6mm) apart.
Feel free to do with it whatever you want (public domain)
Not yet tested!
This small breakout board/adapter for SOT-23-6 or TSOT-23-6 allows to use SMDs for prototyping and/or with a breadboard. Indeed, the pin rows with pin spacing at 0.1 inches (2.54 mm) are 0.3 inches (7.6mm) apart.
Feel free to do with it whatever you want (public domain)
Adapter SOIC-MSOP-TSSOP-8 to DIP-8
2 layer board of 0.42 x 0.42 inches (10.7 x 10.7 mm)
Uploaded:
March 6th 2020
Shared:
March 9th 2020
Total Price:
$0.85
Not yet tested!
This small breakout board/adapter for SOIC-8, MSOP-8 and TSSOP-8 allows to use SMDs for prototyping and/or with a breadboard. Indeed, the pin rows with pin spacing at 0.1 inches (2.54 mm) are 0.3 inches (7.6mm) apart.
Feel free to do with it whatever you want (public d…
Show full description
Not yet tested!
This small breakout board/adapter for SOIC-8, MSOP-8 and TSSOP-8 allows to use SMDs for prototyping and/or with a breadboard. Indeed, the pin rows with pin spacing at 0.1 inches (2.54 mm) are 0.3 inches (7.6mm) apart.
Feel free to do with it whatever you want (public d…
Show full description
Pogo pin adapter to program the gMUX IC of a MacBook - ver. 1
2 layer board of 0.67 x 0.32 inches (17.0 x 8.0 mm)
Uploaded:
October 30th 2019
Shared:
October 30th 2019
Total Price:
$1.05
This board is a small and cheap pogo pin programming solution designed in my case for a Lattice HW-USBN-2A (2.54mm pitch pin header) and the gMUX JTAG connector on a logic board of a MacBook Pro 15" early 2011 (pogo pins). This connector is not soldered on the logic board, thus I will use the pog…
Show full description
This board is a small and cheap pogo pin programming solution designed in my case for a Lattice HW-USBN-2A (2.54mm pitch pin header) and the gMUX JTAG connector on a logic board of a MacBook Pro 15" early 2011 (pogo pins). This connector is not soldered on the logic board, thus I will use the pog…
Show full description
Pogo pin adapter to program the gMUX IC of a MacBook - ver. 0
2 layer board of 0.67 x 0.32 inches (17.0 x 8.0 mm)
Uploaded:
October 2nd 2019
Shared:
October 2nd 2019
Total Price:
$1.05
NOTE: There is a new version of this adapter.
This board is a small and cheap pogo pin programming solution designed in my case for a Lattice HW-USBN-2A (2.54mm pitch pin header) and the gMUX JTAG connector on a logic board of a MacBook Pro …
Show full description
NOTE: There is a new version of this adapter.
This board is a small and cheap pogo pin programming solution designed in my case for a Lattice HW-USBN-2A (2.54mm pitch pin header) and the gMUX JTAG connector on a logic board of a MacBook Pro …
Show full description
