Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

QuadServo-Keypad

author: jterryc
Top
Bottom

2 layer board of 1.11 x 0.95 inches (28.3 x 24.1 mm)
Uploaded: August 05, 2019
Shared: August 26, 2019
Total Price: $5.25

When connected to the QuadServo-DCCDecoder, this keypad allows the user to adjust servo throws precisely via a series of keystrokes and to program the final positions into the Decoder

When connected to the QuadServo-DCCDecoder, this keypad allows the user to adjust servo throws precisely via a series of keystrokes and to program the final positions into the Decoder

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QuadServo-DCCDecoder

author: jterryc
Top
Bottom

2 layer board of 2.81 x 1.10 inches (71.4 x 28.0 mm)
Uploaded: August 05, 2019
Shared: August 26, 2019
Total Price: $15.45

A DCC Accessory Decoder to drive four standard servos - based around an Arduino Nano 3 module and incorporating facilities for the precise manual adjustment of all servo throws (as well as via programming of configuration variables (CVs))

A DCC Accessory Decoder to drive four standard servos - based around an Arduino Nano 3 module and incorporating facilities for the precise manual adjustment of all servo throws (as well as via programming of configuration variables (CVs))

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1.27mm SMD Header Breadboard Breakout

author: Ayilay
Top
Bottom

2 layer board of 0.50 x 0.71 inches (12.8 x 17.9 mm)
Uploaded: August 26, 2019
Shared: August 26, 2019
Total Price: $1.75

A small PCB to allow a 14-pin (or smaller) 1.27mm pitch SMD connector to plug into a breadboard for prototyping

A small PCB to allow a 14-pin (or smaller) 1.27mm pitch SMD connector to plug into a breadboard for prototyping

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

charliewatch-bicolor_2019-08-23

author: moteino_me
Top
Bottom

2 layer board of 1.14 x 1.14 inches (28.9 x 28.9 mm)
Uploaded: August 23, 2019
Shared: August 26, 2019
Total Price: $6.45

charlie watch

charlie watch

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ArcticAirFilter.kicad_pcb

author: dwalton64
Top
Bottom

2 layer board of 3.93 x 2.73 inches (99.8 x 69.4 mm)
Uploaded: June 08, 2019
Shared: August 25, 2019
Total Price: $53.70

EMI Filter for Arctic Air Cooler. Filters noise from the brushless DC motor.

EMI Filter for Arctic Air Cooler. Filters noise from the brushless DC motor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WRX1700 Power Supply V0

author: mat54-wiki
Top
Bottom

2 layer board of 1.10 x 1.80 inches (28.0 x 45.8 mm)
Uploaded: August 25, 2019
Shared: August 25, 2019
Total Price: $9.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rad_dice_logic_board.kicad_pcb

author: nategri
Top
Bottom

2 layer board of 4.65 x 1.93 inches (118.1 x 49.1 mm)
Uploaded: August 23, 2019
Shared: August 25, 2019
Total Price: $44.85

this revision moves nixie cs off of pins 0 and 1

this revision moves nixie cs off of pins 0 and 1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rad_dice_logic_board.kicad_pcb

author: nategri
Top
Bottom

2 layer board of 4.65 x 1.93 inches (118.1 x 49.1 mm)
Uploaded: July 06, 2019
Shared: August 25, 2019
Total Price: $44.85

Rev. Alpha zero for the logic board of my radioactive dice

Rev. Alpha zero for the logic board of my radioactive dice

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Moteino-Shield 1.6.brd

author: blebson
Top
Bottom

2 layer board of 2.60 x 0.91 inches (66.0 x 23.1 mm)
Uploaded: June 07, 2017
Shared: August 24, 2019
Total Price: $11.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Onion DIN Rail Breakout v0.2

author: whatnick
Top
Bottom

4 layer board of 1.29 x 1.60 inches (32.7 x 40.7 mm)
Uploaded: August 24, 2019
Shared: August 24, 2019
Total Price: $20.50

Iteration of DIN Rail compatible Onion Omega Pins board - https://github.com/whatnick/din_isolated_SPI_onion

Iteration of DIN Rail compatible Onion Omega Pins board - https://github.com/whatnick/din_isolated_SPI_onion

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 Wii Bluetooth Replacement

author: JacksonS
Top
Bottom

2 layer board of 1.22 x 0.97 inches (31.0 x 24.6 mm)
Uploaded: August 23, 2019
Shared: August 23, 2019
Total Price: $5.85

ESP32 paired with PIC32 (for USB emulation) to fully replace the Wii’s Bluetooth module. Capable of connecting with any classic Bluetooth controller if programmed to do so. Software currently supports Wii Remote, Wii U Pro Controller, Joy-Con (wired and wireless), and Switch Pro Controller.

ESP32 paired with PIC32 (for USB emulation) to fully replace the Wii’s Bluetooth module. Capable of connecting with any classic Bluetooth controller if programmed to do so. Software currently supports Wii Remote, Wii U Pro Controller, Joy-Con (wired and wireless), and Switch Pro Controller.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bela E-textile Capelet

author: adan_bela
Top
Bottom

2 layer board of 2.05 x 1.67 inches (52.2 x 42.5 mm)
Uploaded: April 04, 2019
Shared: August 23, 2019
Total Price: $17.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

17341^0

author: epccs
Top
Bottom

2 layer board of 4.35 x 2.85 inches (110.5 x 72.4 mm)
Uploaded: March 25, 2019
Shared: August 22, 2019
Total Price: $62.00

Gravimetric

A controller board with ATmega324pb set up for measuring event times using ICP1, ICP3, and ICP4 with RJ45 for multi-drop serial. Two UART or digital IO (RX1, TX1, RX2, TX2) have level shift. Four analog channels (0..3) also work as digital IO. Seven 22mA current source for use wi…

Show full description

Gravimetric

A controller board with ATmega324pb set up for measuring event times using ICP1, ICP3, and ICP4 with RJ45 for multi-drop serial. Two UART or digital IO (RX1, TX1, RX2, TX2) have level shift. Four analog channels (0..3) also work as digital IO. Seven 22mA current source for use wi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED tape adapter board

author: loans
Top
Bottom

2 layer board of 0.60 x 0.40 inches (15.1 x 10.1 mm)
Uploaded: August 22, 2019
Shared: August 22, 2019
Total Price: $1.15

Simple board to attach a 0.1" connector to 4 wire LED tape.

Simple board to attach a 0.1" connector to 4 wire LED tape.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Apple II Headphone Adapter

author: option8
Top
Bottom

2 layer board of 0.78 x 0.62 inches (19.7 x 15.7 mm)
Uploaded: July 23, 2015
Shared: August 22, 2019
Total Price: $2.35

Add an external audio jack to any Apple II.

Add an external audio jack to any Apple II.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

hp16555 adapter v0.2

author: MrScrith
Top
Bottom

2 layer board of 2.10 x 0.85 inches (53.3 x 21.6 mm)
Uploaded: August 22, 2019
Shared: August 22, 2019
Total Price: $8.90

Adapter for the HP16555 logic analyzer

Adapter for the HP16555 logic analyzer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SAMs Driver32

author: jkinkennon
Top
Bottom

2 layer board of 4.80 x 2.39 inches (121.9 x 60.7 mm)
Uploaded: July 16, 2019
Shared: August 22, 2019
Total Price: $57.30

High side PWR MOSFET drivers for organ stop action magnets.

High side PWR MOSFET drivers for organ stop action magnets.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ShiftInOut32

author: jkinkennon
Top
Bottom

2 layer board of 4.80 x 2.29 inches (121.9 x 58.1 mm)
Uploaded: July 27, 2019
Shared: August 22, 2019
Total Price: $54.90

SPI interface, 32 in, 32 out, opt. 12v keying for virtual pipe organ.

SPI interface, 32 in, 32 out, opt. 12v keying for virtual pipe organ.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

24414-A Tester bed-of-nails identifier PCB

author: mstroven
Top
Bottom

2 layer board of 1.81 x 0.81 inches (46.0 x 20.6 mm)
Uploaded: September 06, 2018
Shared: August 22, 2019
Total Price: $7.30

Tester I2C ID PCB (part of 24415 PCBA). Interfaces a 512-Byte 24C04 I2C EEPROM to our production testers

Tester I2C ID PCB (part of 24415 PCBA). Interfaces a 512-Byte 24C04 I2C EEPROM to our production testers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2019_bp constellation_Viewer V1

author: mat54-wiki
Top
Bottom

2 layer board of 1.85 x 2.39 inches (47.0 x 60.7 mm)
Uploaded: August 22, 2019
Shared: August 22, 2019
Total Price: $22.10

A simple BreakOutBoard

A simple BreakOutBoard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy