Shared Projects by Arthrimus

Shared Projects by Arthrimus

Saturn 3D Pad Cable Reproduction PCB

Top
Bottom

2 layer board of 1.40 x 1.00 inches (35.5 x 25.4 mm)
Uploaded: April 30th 2020
Shared: April 30th 2020
Total Price: $6.95

This is the PCB component of my SEGA Saturn 3D pad reproduction cable project. There is a 3D printed housing for this project on Thingiverse:

<https://www.thingiverse.com/thing:4327442>

Order in 1.6mm thickness.

Thanks to the following people for providing measurements and pinout…

Show full description

This is the PCB component of my SEGA Saturn 3D pad reproduction cable project. There is a 3D printed housing for this project on Thingiverse:

<https://www.thingiverse.com/thing:4327442>

Order in 1.6mm thickness.

Thanks to the following people for providing measurements and pinout…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

N64RGB AV breakout

Top
Bottom

2 layer board of 0.74 x 0.32 inches (18.8 x 8.0 mm)
Uploaded: February 20th 2020
Shared: February 20th 2020
Total Price: $1.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SHVC-1L5B-20-DIP SNES SA1 Cartridge PCB with 27C322

Top
Bottom

2 layer board of 4.02 x 2.76 inches (102.1 x 70.2 mm)
Uploaded: February 18th 2020
Shared: February 18th 2020
Total Price: $55.50

A modified version of the SHVC-1L5B-20 PCB used in some SA1 games. Dip pattern added for 27C322 EPROM. Perfect for Gradius III SA1 conversions, provided you can source an SA1 chip.

A modified version of the SHVC-1L5B-20 PCB used in some SA1 games. Dip pattern added for 27C322 EPROM. Perfect for Gradius III SA1 conversions, provided you can source an SA1 chip.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SHVC-1L5B-20 SNES SA1 Cartridge PCB

Top
Bottom

2 layer board of 4.02 x 2.76 inches (102.1 x 70.2 mm)
Uploaded: February 16th 2020
Shared: February 16th 2020
Total Price: $55.50

A reproduction of the SHVC-1L5B-20 PCB used in some SA1 games. Perfect for Gradius III SA1 conversions, provided you can source an SA1 chip.

A reproduction of the SHVC-1L5B-20 PCB used in some SA1 games. Perfect for Gradius III SA1 conversions, provided you can source an SA1 chip.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nanogun V2

Top
Bottom

2 layer board of 4.38 x 1.35 inches (111.1 x 34.3 mm)
Uploaded: November 25th 2019
Shared: November 25th 2019
Total Price: $29.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC