Shared Projects

Shared Projects

plusmaze_arduino

author: kimth
Top
Bottom

2 layer board of 2.55 x 1.60 inches (64.8 x 40.7 mm)
Uploaded: July 16, 2019
Shared: July 16, 2019
Total Price: $20.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

J007877_GAIN_LIMIT_AMP_REVB

author: jET_Janelia_HHMI
Top
Bottom

2 layer board of 3.15 x 1.97 inches (80.0 x 50.0 mm)
Uploaded: July 16, 2019
Shared: July 16, 2019
Total Price: $31.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UV light board v2

author: nsayer
Top
Bottom

2 layer board of 3.15 x 3.15 inches (80.0 x 80.0 mm)
Uploaded: June 14, 2019
Shared: July 16, 2019
Total Price: $49.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UV light board v3

author: nsayer
Top
Bottom

2 layer board of 3.15 x 3.15 inches (80.0 x 80.0 mm)
Uploaded: June 29, 2019
Shared: July 16, 2019
Total Price: $49.60

This is a boost converter powered LED board. It's intended to be populated with 21 SM0603UV-405 UV LEDs, but really any 0603 LED would work just fine. The boost converter is the AP3015. The two 1210 caps are 10 µF, the inductor is 10 µH and the diode is an MBRA340 Schottky diode. The resistor div…

Show full description

This is a boost converter powered LED board. It's intended to be populated with 21 SM0603UV-405 UV LEDs, but really any 0603 LED would work just fine. The boost converter is the AP3015. The two 1210 caps are 10 µF, the inductor is 10 µH and the diode is an MBRA340 Schottky diode. The resistor div…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Simple DataFlash Board

author: johnsondavies
Top
Bottom

2 layer board of 0.65 x 0.65 inches (16.5 x 16.5 mm)
Uploaded: July 16, 2019
Shared: July 16, 2019
Total Price: $2.10

Plugs into one of the headers on an Arduino Uno or other board to provide 4Mbytes of non-volatile storage.

For more information see: <http://www.technoblogy.com/show?2JMU>.

Plugs into one of the headers on an Arduino Uno or other board to provide 4Mbytes of non-volatile storage.

For more information see: <http://www.technoblogy.com/show?2JMU>.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

JP5 v2

author: toy4x4
Top
Bottom

2 layer board of 2.48 x 0.59 inches (63.0 x 15.0 mm)
Uploaded: July 15, 2019
Shared: July 16, 2019
Total Price: $7.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

JP6 v2

author: toy4x4
Top
Bottom

2 layer board of 2.48 x 0.59 inches (63.0 x 15.0 mm)
Uploaded: July 15, 2019
Shared: July 16, 2019
Total Price: $7.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARINC 429

author: sjm
Top
Bottom

2 layer board of 0.61 x 0.69 inches (15.4 x 17.5 mm)
Uploaded: July 15, 2019
Shared: July 15, 2019
Total Price: $2.05

ARINC 429 transmitter using Digilent PMOD pin out. Designed for easy interfacing to many FPGA development systems. Uses Holt HI-8596PCI and OSTVN screw terminals.

ARINC 429 transmitter using Digilent PMOD pin out. Designed for easy interfacing to many FPGA development systems. Uses Holt HI-8596PCI and OSTVN screw terminals.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AlienWhoopF7

author: Chaotixtech
Top
Bottom

2 layer board of 1.15 x 1.15 inches (29.1 x 29.1 mm)
Uploaded: July 15, 2019
Shared: July 15, 2019
Total Price: $6.55

This is a copy of the original by Alienwhoop https://oshpark.com/profiles/AlienWhoop

This is a copy of the original by Alienwhoop https://oshpark.com/profiles/AlienWhoop

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PewPew Lite for D1 Mini

author: deshipu
Top
Bottom

2 layer board of 1.06 x 1.35 inches (26.9 x 34.4 mm)
Uploaded: June 20, 2019
Shared: July 15, 2019
Total Price: $7.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Saturn Demux v0

author: arithmaldor
Top
Bottom

2 layer board of 0.84 x 0.83 inches (21.4 x 21.1 mm)
Uploaded: July 14, 2019
Shared: July 14, 2019
Total Price: $3.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mma_res_a

author: skua47
Top
Bottom

2 layer board of 0.59 x 1.15 inches (14.9 x 29.2 mm)
Uploaded: June 24, 2014
Shared: July 14, 2019
Total Price: $3.35

vertical board

vertical board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MMA_res_b

author: skua47
Top
Bottom

2 layer board of 1.19 x 0.55 inches (30.2 x 14.0 mm)
Uploaded: June 24, 2014
Shared: July 14, 2019
Total Price: $3.25

horizontal board

horizontal board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MMA_Array Adapter 2

author: skua47
Top
Bottom

2 layer board of 3.01 x 2.01 inches (76.5 x 50.9 mm)
Uploaded: March 11, 2016
Shared: July 14, 2019
Total Price: $30.20

MMA Array Adapter

MMA Array Adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LEDdisplayModule-Header2x10

author: Pico
Top
Bottom

2 layer board of 1.10 x 1.33 inches (28.0 x 33.7 mm)
Uploaded: June 04, 2019
Shared: July 14, 2019
Total Price: $7.25

Breakout board for STP16CPC26 LED driver. Daisy-chainable, each board drives 16 independent strings of LEDs. Separate positive power line for LED strings allows up to 10 red or 5 green/blue/white LEDs per string. 4 wire interface ((Clock/Data/Latch/Brightness) from 3.3 or 5V Arduino & ilk. G…

Show full description

Breakout board for STP16CPC26 LED driver. Daisy-chainable, each board drives 16 independent strings of LEDs. Separate positive power line for LED strings allows up to 10 red or 5 green/blue/white LEDs per string. 4 wire interface ((Clock/Data/Latch/Brightness) from 3.3 or 5V Arduino & ilk. G…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SAO v1.69bis Null Modem

author: nsayer
Top
Bottom

2 layer board of 1.68 x 0.60 inches (42.6 x 15.3 mm)
Uploaded: July 13, 2019
Shared: July 13, 2019
Total Price: $5.00

The "S" in SAO now stands for Serial.

This SAO will connect two badges together in a null modem arrangement, wiring one badge's TX to the other's RX and vice versa.

Put two shrouded 2x3 connectors on the bottom of the board. Put a 1x2 connector on the top and short it (or not) with a shorti…

Show full description

The "S" in SAO now stands for Serial.

This SAO will connect two badges together in a null modem arrangement, wiring one badge's TX to the other's RX and vice versa.

Put two shrouded 2x3 connectors on the bottom of the board. Put a 1x2 connector on the top and short it (or not) with a shorti…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VE6JI_Varactor_Mini_Board

author: VE6JI
Top
Bottom

2 layer board of 0.81 x 0.31 inches (20.5 x 7.8 mm)
Uploaded: December 21, 2017
Shared: July 13, 2019
Total Price: $1.20

Varactor D1 is Placed in parallel with a user selected 1206 capacitor. R1 is very high resistance ~1 - 3 MOhms to bias the Varactor from +V-var.

Varactor D1 is Placed in parallel with a user selected 1206 capacitor. R1 is very high resistance ~1 - 3 MOhms to bias the Varactor from +V-var.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VE6JI_AOCJY3-B_OSC

author: VE6JI
Top
Bottom

2 layer board of 2.81 x 1.31 inches (71.3 x 33.2 mm)
Uploaded: December 29, 2017
Shared: July 13, 2019
Total Price: $18.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dallas 1 - Wire x 4 Breakout

author: VE6JI
Top
Bottom

2 layer board of 1.31 x 0.51 inches (33.3 x 13.0 mm)
Uploaded: July 13, 2019
Shared: July 13, 2019
Total Price: $3.30

Add four 1 - Wire devices to you Arduino / Raspberry Pi Project. Add a 4.7 k Ohm resistor for each device you use.

Add four 1 - Wire devices to you Arduino / Raspberry Pi Project. Add a 4.7 k Ohm resistor for each device you use.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FrolfLight

author: IllNate
Top
Bottom

2 layer board of 1.17 x 0.80 inches (29.7 x 20.2 mm)
Uploaded: January 20, 2016
Shared: July 12, 2019
Total Price: $4.65

PCB to power 2 LED's off 2032 coin cell, using 555 timer to alternate LED blink frequency.

PCB to power 2 LED's off 2032 coin cell, using 555 timer to alternate LED blink frequency.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy