Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Open Panzer Scout ESC (Rev11)

author: OpenPanzer
Top
Bottom

2 layer board of 1.91 x 2.57 inches (48.6 x 65.3 mm)
Uploaded: September 05, 2019
Shared: September 05, 2019
Total Price: $24.55

The Scout ESC is an open-source, dual brushed-motor speed controller that accepts both standard RC inputs or logic-level serial commands. The onboard processor is an ATmega 328 and can be programmed with the Arduino IDE using a standard FTDI cable or adapter (precompiled firmwares can also be dow…

Show full description

The Scout ESC is an open-source, dual brushed-motor speed controller that accepts both standard RC inputs or logic-level serial commands. The onboard processor is an ATmega 328 and can be programmed with the Arduino IDE using a standard FTDI cable or adapter (precompiled firmwares can also be dow…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mezzo-v3

author: liamcohen
Top
Bottom

2 layer board of 2.95 x 2.10 inches (75.0 x 53.3 mm)
Uploaded: September 05, 2019
Shared: September 05, 2019
Total Price: $31.00

Arduino Shield V3.0 for 20-bit DAC/16-bit ADC (dual card) boards

Arduino Shield V3.0 for 20-bit DAC/16-bit ADC (dual card) boards

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Qwiic compatible i2c isolator

author: blackketter
Top
Bottom

2 layer board of 0.92 x 0.53 inches (23.3 x 13.4 mm)
Uploaded: September 04, 2019
Shared: September 05, 2019
Total Price: $2.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mini_picc_pcb

author: eselabs
Top
Bottom

2 layer board of 0.31 x 0.26 inches (7.9 x 6.6 mm)
Uploaded: November 12, 2016
Shared: September 05, 2019
Total Price: $0.40

Version 1 of mini picc pcb

Version 1 of mini picc pcb

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MK22-LQFP Breakout

author: pgvoorhees
Top
Bottom

4 layer board of 1.99 x 1.83 inches (50.5 x 46.5 mm)
Uploaded: September 05, 2019
Shared: September 05, 2019
Total Price: $36.30

MK22-LQFP Breakout

MK22-LQFP Breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

heart-pcb-2 03.06.2019

author: mariusmym
Top
Bottom

2 layer board of 1.18 x 1.01 inches (29.9 x 25.6 mm)
Uploaded: June 03, 2019
Shared: September 05, 2019
Total Price: $5.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ethernet Magjack Breakout

author: ppelleti
Top
Bottom

2 layer board of 0.76 x 1.38 inches (19.2 x 35.1 mm)
Uploaded: April 25, 2018
Shared: September 05, 2019
Total Price: $5.20

Breakout board for Amphenol RJMG1BD3B8K1ANR Magjack. See source repository and blog post.

Breakout board for Amphenol RJMG1BD3B8K1ANR Magjack. See source repository and blog post.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

932979_REV_2_gerbers

author: hchiu
Top
Bottom

2 layer board of 1.52 x 2.04 inches (38.7 x 51.7 mm)
Uploaded: September 03, 2019
Shared: September 04, 2019
Total Price: $15.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Intensity Servo Revised

author: nathanfredman
Top
Bottom

2 layer board of 4.15 x 3.69 inches (105.4 x 93.7 mm)
Uploaded: September 04, 2019
Shared: September 04, 2019
Total Price: $76.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

culter.kicad_pcb

author: tjhacks
Top
Bottom

2 layer board of 0.88 x 1.10 inches (22.3 x 28.0 mm)
Uploaded: September 04, 2019
Shared: September 04, 2019
Total Price: $4.80

rj45 to pin breakout

rj45 to pin breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

caps-lock-buzzer

author: bikerglen
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: August 24, 2019
Shared: September 04, 2019
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Amphenol T-3638-404 board v2

author: joshua.rogers
Top
Bottom

2 layer board of 1.47 x 0.82 inches (37.4 x 20.9 mm)
Uploaded: September 04, 2019
Shared: September 04, 2019
Total Price: $6.05

A revised version of the Amphenol T-3638-404 connector board with choke and back-emf diode included

A revised version of the Amphenol T-3638-404 connector board with choke and back-emf diode included

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB Motor 0.3-a

author: FyberLabs
Top
Bottom

4 layer board of 3.10 x 2.70 inches (78.8 x 68.6 mm)
Uploaded: September 04, 2019
Shared: September 04, 2019
Total Price: $83.80

Design test

Design test

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ant-Injector.zip

author: rolin
Top
Bottom

2 layer board of 1.19 x 1.78 inches (30.2 x 45.2 mm)
Uploaded: April 22, 2017
Shared: September 04, 2019
Total Price: $10.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AML-30.zip

author: rolin
Top
Bottom

2 layer board of 1.19 x 1.78 inches (30.2 x 45.2 mm)
Uploaded: April 22, 2017
Shared: September 04, 2019
Total Price: $10.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM8L_SensorsUnit

author: Rasyoung
Top
Bottom

2 layer board of 1.05 x 1.65 inches (26.7 x 41.9 mm)
Uploaded: September 04, 2019
Shared: September 04, 2019
Total Price: $8.65

https://github.com/HomeSmartMesh/STM8_IoT_Boards

https://github.com/HomeSmartMesh/STM8_IoT_Boards

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Lumen Shield

author: jonkensta
Top
Bottom

2 layer board of 1.51 x 2.51 inches (38.4 x 63.8 mm)
Uploaded: October 10, 2017
Shared: September 04, 2019
Total Price: $18.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Keyloader Rear Panel

author: epeters242
Top
Bottom

2 layer board of 1.68 x 0.91 inches (42.7 x 23.2 mm)
Uploaded: September 03, 2019
Shared: September 03, 2019
Total Price: $7.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Keyloader Front Panel

author: epeters242
Top
Bottom

2 layer board of 1.68 x 0.91 inches (42.7 x 23.2 mm)
Uploaded: September 03, 2019
Shared: September 03, 2019
Total Price: $7.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Keyloader Hirose Interposer

author: epeters242
Top
Bottom

2 layer board of 0.88 x 0.48 inches (22.3 x 12.3 mm)
Uploaded: August 29, 2019
Shared: September 03, 2019
Total Price: $2.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy