Shared Projects

Shared Projects

24H Digital Clock

author: erikvanzijst
Top
Bottom

2 layer board of 6.02 x 2.95 inches (153.0 x 75.0 mm)
Uploaded: July 29, 2019
Shared: July 29, 2019
Total Price: $88.85

24 hour clock built with 7400 CMOS and a 32kHz crystal.

24 hour clock built with 7400 CMOS and a 32kHz crystal.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

311_Sensor_Board_R1.1

author: JaresRD
Top
Bottom

2 layer board of 0.47 x 1.36 inches (11.9 x 34.6 mm)
Uploaded: July 28, 2019
Shared: July 28, 2019
Total Price: $3.15

This board was designed for UAH's MAE 311 class and contains circuitry for 10-DOF motion and a thermocouple.

This board was designed for UAH's MAE 311 class and contains circuitry for 10-DOF motion and a thermocouple.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OpAmp_SE

author: doctek
Top
Bottom

2 layer board of 0.46 x 0.46 inches (11.6 x 11.7 mm)
Uploaded: December 22, 2017
Shared: July 28, 2019
Total Price: $1.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LI_Noise1

author: doctek
Top
Bottom

2 layer board of 0.92 x 0.64 inches (23.3 x 16.2 mm)
Uploaded: December 22, 2017
Shared: July 28, 2019
Total Price: $2.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LI_Noise2

author: doctek
Top
Bottom

2 layer board of 0.73 x 0.65 inches (18.4 x 16.4 mm)
Uploaded: December 22, 2017
Shared: July 28, 2019
Total Price: $2.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Lock_In2

author: doctek
Top
Bottom

2 layer board of 0.66 x 0.96 inches (16.7 x 24.4 mm)
Uploaded: December 22, 2017
Shared: July 28, 2019
Total Price: $3.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

v1-B2-5

author: ArduinoEnigma
Top
Bottom

2 layer board of 2.02 x 2.58 inches (51.2 x 65.6 mm)
Uploaded: July 27, 2019
Shared: July 28, 2019
Total Price: $26.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SI4713 to RPI

author: bshep
Top
Bottom

2 layer board of 2.29 x 1.19 inches (58.3 x 30.3 mm)
Uploaded: July 14, 2019
Shared: July 28, 2019
Total Price: $13.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TS2596 24V (7V to 40V) to 5V at 3A regulator

author: Wire
Top
Bottom

2 layer board of 2.31 x 1.68 inches (58.6 x 42.7 mm)
Uploaded: July 27, 2019
Shared: July 27, 2019
Total Price: $19.35

5V @ 3A regulator for my Prusa 3D printer. Wanted to mount a webcam to my printer without adding another power supply. This TS2596 based regulator takes ~7V to 40V in and produces 5V out at up to 3A. J3 can be used to shut down the regulator by applying 2V or greater to it.

5V @ 3A regulator for my Prusa 3D printer. Wanted to mount a webcam to my printer without adding another power supply. This TS2596 based regulator takes ~7V to 40V in and produces 5V out at up to 3A. J3 can be used to shut down the regulator by applying 2V or greater to it.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

0201_1in.kicad_pcb

author: Billy-Bogardus-MT
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.5 x 25.5 mm)
Uploaded: July 26, 2019
Shared: July 26, 2019
Total Price: $5.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

0201.kicad_pcb

author: Billy-Bogardus-MT
Top
Bottom

2 layer board of 0.51 x 0.51 inches (12.8 x 12.8 mm)
Uploaded: July 26, 2019
Shared: July 26, 2019
Total Price: $1.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PVM Front Panel IO

author: Arthrimus
Top
Bottom

2 layer board of 3.94 x 3.19 inches (100.2 x 81.1 mm)
Uploaded: July 26, 2019
Shared: July 26, 2019
Total Price: $62.95

Don't get this manufactured here on OSHpark, the board is just too big to be cost effective. You can get these made way cheaper through a Chinese PCB house.

4x BNC Connectors: 1-1634622-0 2x S-Video Connectors: MD-40SMK 2x RCA White: RCJ-013 2x RCA Red: RCJ-012 1x RCA Yellow: RCJ-014 3x…

Show full description

Don't get this manufactured here on OSHpark, the board is just too big to be cost effective. You can get these made way cheaper through a Chinese PCB house.

4x BNC Connectors: 1-1634622-0 2x S-Video Connectors: MD-40SMK 2x RCA White: RCJ-013 2x RCA Red: RCJ-012 1x RCA Yellow: RCJ-014 3x…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DoubleOpticalSensor

author: cindyharnett
Top
Bottom

2 layer board of 1.06 x 0.58 inches (26.8 x 14.7 mm)
Uploaded: July 13, 2019
Shared: July 25, 2019
Total Price: $3.00

Two LED/VEML7700 optical sensors and diode for switching between VEML7700 with same address on same I2C bus at 3.3V. Not designed for 5V

Two LED/VEML7700 optical sensors and diode for switching between VEML7700 with same address on same I2C bus at 3.3V. Not designed for 5V

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Smartstick REV6

author: jeffawang
Top
Bottom

2 layer board of 0.71 x 1.41 inches (17.9 x 35.7 mm)
Uploaded: July 01, 2019
Shared: July 25, 2019
Total Price: $4.95

Smartstick Board Revision 6

  • Changes program button to a power cutoff switch
  • Changes power cutoff switch to one with through-hole supports for longevity
  • LEDs now powered by battery directly
  • Updated LED cutoff MOSFET circuit

Smartstick Board Revision 6

  • Changes program button to a power cutoff switch
  • Changes power cutoff switch to one with through-hole supports for longevity
  • LEDs now powered by battery directly
  • Updated LED cutoff MOSFET circuit
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Adafruit SWD Breakout

author: incyi
Top
Bottom

2 layer board of 0.71 x 0.55 inches (18.1 x 14.0 mm)
Uploaded: July 25, 2019
Shared: July 25, 2019
Total Price: $1.95

https://github.com/adafruit/Adafruit-ISP-SWD-and-JTAG-Breakout-PCBs

https://github.com/adafruit/Adafruit-ISP-SWD-and-JTAG-Breakout-PCBs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

led_power

author: ronp5683
Top
Bottom

4 layer board of 3.74 x 3.76 inches (94.9 x 95.5 mm)
Uploaded: July 25, 2019
Shared: July 25, 2019
Total Price: $140.50

LED Power Board

LED Power Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tony Bar Lights

author: Sputnik7
Top
Bottom

2 layer board of 1.90 x 1.50 inches (48.4 x 38.2 mm)
Uploaded: July 25, 2019
Shared: July 25, 2019
Total Price: $14.30

An RGB LED strip controller using a wemos to control them using a Blynk program from a cell phone.

An RGB LED strip controller using a wemos to control them using a Blynk program from a cell phone.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Microgun Supergun

author: Arthrimus
Top
Bottom

2 layer board of 4.51 x 1.75 inches (114.4 x 44.4 mm)
Uploaded: July 25, 2019
Shared: July 25, 2019
Total Price: $39.40

A compact simple supergun based on the minigun design by Frank_fjs.

This version replaces the 8 pin Mini DIN output of the minigun design with a Genesis 2 compatible 9 pin Mini DIN output. It also replaces the 6 …

Show full description

A compact simple supergun based on the minigun design by Frank_fjs.

This version replaces the 8 pin Mini DIN output of the minigun design with a Genesis 2 compatible 9 pin Mini DIN output. It also replaces the 6 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZEMCT131CMon.v01

author: PeskyProducts
Top
Bottom

2 layer board of 0.90 x 1.02 inches (22.9 x 25.9 mm)
Uploaded: July 25, 2019
Shared: July 25, 2019
Total Price: $4.55

Breakout to test ZEMCT131A AC current monitor.

Breakout to test ZEMCT131A AC current monitor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZMPT107VMon.v01

author: PeskyProducts
Top
Bottom

2 layer board of 0.90 x 0.95 inches (22.9 x 24.2 mm)
Uploaded: July 25, 2019
Shared: July 25, 2019
Total Price: $4.25

Breakout board for testing the ZMPT107 AC voltage monitor.

Breakout board for testing the ZMPT107 AC voltage monitor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy