Shared Projects by blecky

Shared Projects by blecky

BRTRO-420 Better Blazin' Mod

2 layer board of 3.07 x 2.99 inches (78.0 x 76.0 mm)
Uploaded: November 6th 2019
Shared: November 6th 2019
Total Price: $45.95

Embeddable link to order this shared Project

BreakoutBoard

2 layer board of 0.90 x 1.40 inches (22.9 x 35.6 mm)
Uploaded: December 23rd 2017
Shared: December 4th 2018
Total Price: $6.30

Embeddable link to order this shared Project

dd if=/dev/null of=/dev/drill

2 layer board of 0.95 x 0.98 inches (24.1 x 24.8 mm)
Uploaded: July 28th 2018
Shared: July 28th 2018
Total Price: $4.60

Embeddable link to order this shared Project

SensorDotsDevBoard

2 layer board of 1.20 x 1.13 inches (30.5 x 28.6 mm)
Uploaded: August 5th 2017
Shared: August 5th 2017
Total Price: $6.75

Embeddable link to order this shared Project

N64 UltraCIC II

2 layer board of 0.82 x 0.40 inches (20.8 x 10.1 mm)
Uploaded: March 21st 2017
Shared: March 21st 2017
Total Price: $1.60

The resistor should be a 20K 0805 SMD, and the jumper (two middle pins) should be a right angled 2 pin connector if you want selectability, otherwise just bridge the small solder pads.

The resistor should be a 20K 0805 SMD, and the jumper (two middle pins) should be a right angled 2 pin connector if you want selectability, otherwise just bridge the small solder pads.

Embeddable link to order this shared Project