Shared Projects by trainer4edu

Shared Projects by trainer4edu

Mini T3.2 - Miniaturization of Teensy 3.2 board

Top
Bottom

2 layer board of 1.20 x 0.51 inches (30.5 x 13.0 mm)
Uploaded: November 10, 2021
Shared: November 10, 2021
Total Price: $3.05

Download SCH, BOM and assembly instructions at:

https://forum.pjrc.com/threads/68613-Mini-3-2-Made-Teensy-3-2-smaller-at-30-48mm-x-12-98mm

Download SCH, BOM and assembly instructions at:

https://forum.pjrc.com/threads/68613-Mini-3-2-Made-Teensy-3-2-smaller-at-30-48mm-x-12-98mm

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Label sheet for Mini-T3.2 board, a small Teensy 3.2 compatible

Top
Bottom

2 layer board of 1.20 x 0.51 inches (30.5 x 12.8 mm)
Uploaded: November 10, 2021
Shared: November 10, 2021
Total Price: $3.00

This board is designed as a label sheet for the Mini-T3.2, a small Teensy 3.2 compatible board. When you order this PCB, the PCB should be 0.8mm thick.

This board is designed as a label sheet for the Mini-T3.2, a small Teensy 3.2 compatible board. When you order this PCB, the PCB should be 0.8mm thick.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

A third Teensy 4.0 breakout board - V3 with USB host

Top
Bottom

2 layer board of 2.41 x 0.80 inches (61.1 x 20.3 mm)
Uploaded: November 05, 2019
Shared: November 05, 2019
Total Price: $9.60

A Teensy 4.0 breakout board with 3.6 footprint with USB hose support. It includes an on-board micro SD card slot for the Teensy 4.0. It’s tested OK with Bill Greiman’s SdFat 2.0.0-beta.3. When SD card is not used, D34-D39 can be used as I/O pins.

It also supports USB host applications with bl…

Show full description

A Teensy 4.0 breakout board with 3.6 footprint with USB hose support. It includes an on-board micro SD card slot for the Teensy 4.0. It’s tested OK with Bill Greiman’s SdFat 2.0.0-beta.3. When SD card is not used, D34-D39 can be used as I/O pins.

It also supports USB host applications with bl…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

A third Teensy 4.0 breakout board WITHOUT USB host

Top
Bottom

2 layer board of 2.08 x 0.70 inches (52.8 x 17.6 mm)
Uploaded: November 05, 2019
Shared: November 05, 2019
Total Price: $7.20

A Teensy 4.0 breakout board with 3.6 footprint without USB host support. If you don't need USB Host applications you can order this one, it's a bit cheaper, otherwise order FRDM4236-V3 board.

It includes an on-board micro SD card slot for the Teensy 4.0. It's tested OK with Bill Greiman's …

Show full description

A Teensy 4.0 breakout board with 3.6 footprint without USB host support. If you don't need USB Host applications you can order this one, it's a bit cheaper, otherwise order FRDM4236-V3 board.

It includes an on-board micro SD card slot for the Teensy 4.0. It's tested OK with Bill Greiman's …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy