Shared Projects by FragolRoc

Shared Projects by FragolRoc

FT LED QSB for NES/SNS-101 & AV Famicom

Top
Bottom

2 layer board of 0.47 x 0.77 inches (11.9 x 19.7 mm)
Uploaded: January 26, 2022
Shared: January 26, 2022
Total Price: $1.80

PCB Thickness: 0.8mm

A QSB for adding LED to model 2 NES/SNES/Famicom consoles

Assembly Video: https://youtu.be/VYcmCFvWq1g

NES-101/AV Famicom Install Video (No-Cut): https://youtu.be/nxbn5jK8ETs NES-101/AV Famicom Install Video (Cut/Drill): COMING SOON

SNES Jr./Mini Install Video (Cu…

Show full description

PCB Thickness: 0.8mm

A QSB for adding LED to model 2 NES/SNES/Famicom consoles

Assembly Video: https://youtu.be/VYcmCFvWq1g

NES-101/AV Famicom Install Video (No-Cut): https://youtu.be/nxbn5jK8ETs NES-101/AV Famicom Install Video (Cut/Drill): COMING SOON

SNES Jr./Mini Install Video (Cu…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PS2 Slim IDE QSB

Top
Bottom

2 layer board of 0.99 x 1.01 inches (25.2 x 25.6 mm)
Uploaded: January 16, 2022
Shared: January 16, 2022
Total Price: $4.95

A small breakout board to convert a 20pin 0.5mm pitch FFC into larger solder pads. Used in PS2 Slim IDE mod.

Recommended PCB thickness: 0.8mm

@FragolRoc

A small breakout board to convert a 20pin 0.5mm pitch FFC into larger solder pads. Used in PS2 Slim IDE mod.

Recommended PCB thickness: 0.8mm

@FragolRoc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SNES2CDi Adapter Board

Top
Bottom

2 layer board of 2.37 x 1.79 inches (60.1 x 45.5 mm)
Uploaded: January 12, 2022
Shared: January 12, 2022
Total Price: $21.15

Original Project & Instructions: https://github.com/anarterb/SNEStoCDi

This PCB allows users to create their own controller adapter by soldering components to one location. Using an SNES controller port and an Arduino Nano, you can choose to make a MiniDIN adapter. This is still a work in prog…

Show full description

Original Project & Instructions: https://github.com/anarterb/SNEStoCDi

This PCB allows users to create their own controller adapter by soldering components to one location. Using an SNES controller port and an Arduino Nano, you can choose to make a MiniDIN adapter. This is still a work in prog…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AV Famicom NESRGB Buddy Board (AV Fami-Buddy)

Top
Bottom

2 layer board of 2.10 x 0.37 inches (53.2 x 9.4 mm)
Uploaded: December 23, 2021
Shared: December 23, 2021
Total Price: $3.85

Feel free make one and leave feedback!

A breakout board for NESRGB installs on AV Famicoms. Attaches to the underside of the AV multiout and extends pads to the side of the board. This allows installers to run ribbon or wire straight to pads rather than trying to solder directly to the pins. …

Show full description

Feel free make one and leave feedback!

A breakout board for NESRGB installs on AV Famicoms. Attaches to the underside of the AV multiout and extends pads to the side of the board. This allows installers to run ribbon or wire straight to pads rather than trying to solder directly to the pins. …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

N64 RGB Buddy Board (Anchor Edition)

Top
Bottom

2 layer board of 1.16 x 0.27 inches (29.6 x 7.0 mm)
Uploaded: December 01, 2021
Shared: December 01, 2021
Total Price: $1.55

A breakout board that offers an alternative to soldering wire directly to vias. This board can also be used to repair burnt vias/pads.

GitHub: https://github.com/FragolRoc/FT-N64-Buddy-Long-Board

A breakout board that offers an alternative to soldering wire directly to vias. This board can also be used to repair burnt vias/pads.

GitHub: https://github.com/FragolRoc/FT-N64-Buddy-Long-Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy