Shared projects

B13B One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on May 13th, 2018 02:50

This One Tube Nixie Clock adapter is for any side-view tube that uses a B13B socket. This includes ZM1040, ZM1042, Z566, Z5660M, Z522M and Z5220M. These tubes have 1mm pins that plug in to a socket. This board is intended to use mill-max sockets 8331-0-15-16-27-10-0 which are available on digikey

The board includes pads for a neopixel and for a current limiting resistor


B13B One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on May 13th, 2018 02:50

This One Tube Nixie Clock adapter is for any side-view tube that uses a B13B socket. This includes ZM1040, ZM1042, Z566, Z5660M, Z522M and Z5220M. These tubes have 1mm pins that plug in to a socket. This board is intended to use mill-max sockets 8331-0-15-16-27-10-0 which are available on digikey

The board includes pads for a neopixel and for a current limiting resistor



B26-A One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on April 22nd, 2018 13:49

This One Tube Nixie Clock adapter is for any tube that uses a B-26A socket. This basically means the Hivac GR10J. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.

The board includes pads for a neopixel and for a current limiting resistor


B26-A One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on April 22nd, 2018 13:49

This One Tube Nixie Clock adapter is for any tube that uses a B-26A socket. This basically means the Hivac GR10J. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.

The board includes pads for a neopixel and for a current limiting resistor



RTS-54 One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on April 22nd, 2018 13:46

This One Tube Nixie Clock adapter is for any tube that uses a RTS-54 socket. This includes NL5440, NL5440A, NL5441, NL5441A, B54370A, B5440, B5440A, B5441, B5441A etc. These tubes have 0.76mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘0.76mm tube socket pins’.

The board includes pads for a neopixel and for a current limiting resistor


RTS-54 One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on April 22nd, 2018 13:46

This One Tube Nixie Clock adapter is for any tube that uses a RTS-54 socket. This includes NL5440, NL5440A, NL5441, NL5441A, B54370A, B5440, B5440A, B5441, B5441A etc. These tubes have 0.76mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘0.76mm tube socket pins’.

The board includes pads for a neopixel and for a current limiting resistor



RTS-11 One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on April 22nd, 2018 13:40

This One Tube Nixie Clock adapter is for tubes that have an RTS-11 socket. This includes NL840, NL807, NL821, NL844 and NL900. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.

The board includes pads for a neopixel and for a current limiting resistor.


RTS-11 One Tube Clock Nixie tube adapter

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on April 22nd, 2018 13:40

This One Tube Nixie Clock adapter is for tubes that have an RTS-11 socket. This includes NL840, NL807, NL821, NL844 and NL900. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.

The board includes pads for a neopixel and for a current limiting resistor.



SK-116 One Tube Clock Nixie tube adapter.

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on February 13th, 2018 22:27

This One Tube Nixie Clock adapter is for any side-view tube that uses a SK-116 socket. This includes GN-6A, GN-13A, XN-3, XN-13, etc. These tubes have flying leads. This board is intended to use individual Mill-Max 0665-0-15-15-30-27-10-0 sockets for each lead. They can be found on digikey.

The board includes pads for a neopixel and for a current limiting resistor


SK-116 One Tube Clock Nixie tube adapter.

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm).
Shared on February 13th, 2018 22:27

This One Tube Nixie Clock adapter is for any side-view tube that uses a SK-116 socket. This includes GN-6A, GN-13A, XN-3, XN-13, etc. These tubes have flying leads. This board is intended to use individual Mill-Max 0665-0-15-15-30-27-10-0 sockets for each lead. They can be found on digikey.

The board includes pads for a neopixel and for a current limiting resistor