Shared Projects

Shared Projects

e-series-adapter

author: manlycode
Top
Bottom

2 layer board of 2.01 x 4.31 inches (51.0 x 109.4 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $43.20

Adapter for Particle E Series controller

Adapter for Particle E Series controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sega bypass version 2 switch version

author: FrankStrasser
Top
Bottom

2 layer board of 1.30 x 1.88 inches (33.1 x 47.7 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $12.20

Same as my sega bypass version 2 just has holes and pads for a switch for fm audio switch for master system 2 or perhaps a region mod switch for that or genesis. Order .8 for best fit and make sure to remove r71 on bottom of genesis or r29 on master system 2 if using retrovision cables. I also …

Show full description

Same as my sega bypass version 2 just has holes and pads for a switch for fm audio switch for master system 2 or perhaps a region mod switch for that or genesis. Order .8 for best fit and make sure to remove r71 on bottom of genesis or r29 on master system 2 if using retrovision cables. I also …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DA15 Breakout V2.0

author: MorganS
Top
Bottom

2 layer board of 0.70 x 0.91 inches (17.8 x 23.1 mm)
Uploaded: November 02, 2015
Shared: December 01, 2020
Total Price: $3.15

Dwire prototype

Dwire prototype

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DB25 Breakout 2.0

author: MorganS
Top
Bottom

2 layer board of 1.15 x 1.45 inches (29.2 x 36.8 mm)
Uploaded: November 02, 2015
Shared: December 01, 2020
Total Price: $8.30

Dwire Prototype

Dwire Prototype

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DE9 Breakout 2.11

author: MorganS
Top
Bottom

2 layer board of 1.15 x 0.66 inches (29.2 x 16.8 mm)
Uploaded: February 08, 2016
Shared: December 01, 2020
Total Price: $3.80

DE9 connection board

DE9 connection board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Inverter.kicad_pcb

author: meull
Top
Bottom

4 layer board of 2.37 x 2.54 inches (60.1 x 64.6 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $60.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Inverter.kicad_pcb

author: meull
Top
Bottom

4 layer board of 2.37 x 2.54 inches (60.1 x 64.6 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $60.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRV8825 Carrier Board

author: dkemppai
Top
Bottom

2 layer board of 1.30 x 1.40 inches (33.1 x 35.6 mm)
Uploaded: November 28, 2020
Shared: December 01, 2020
Total Price: $9.10

DRV8825 Carrier Board. Single Carrier board with headers for Pololu DRV8825 stepper motor driver. Uses Phoenix Contact MPT series pin headers. Space for a 10mm x 5mm spaced electrolytic (220uF or so), and three 1210 or 1206 size ceramic capacitors (3.3uf, 4.7uF, or 10uF, etc.). Three pin shorti…

Show full description

DRV8825 Carrier Board. Single Carrier board with headers for Pololu DRV8825 stepper motor driver. Uses Phoenix Contact MPT series pin headers. Space for a 10mm x 5mm spaced electrolytic (220uF or so), and three 1210 or 1206 size ceramic capacitors (3.3uf, 4.7uF, or 10uF, etc.). Three pin shorti…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sega bypass version 2

author: FrankStrasser
Top
Bottom

2 layer board of 1.30 x 1.88 inches (33.1 x 47.7 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $12.20

Order .8 mil for best fit. The second version of my genesis rgb bypass board now no need for a jumper for hd retrovision cables but if using them you need to remove resistor r 71 from bottom of board near the multiout connector. If using mono audio and hd retrovision cables its possible to have…

Show full description

Order .8 mil for best fit. The second version of my genesis rgb bypass board now no need for a jumper for hd retrovision cables but if using them you need to remove resistor r 71 from bottom of board near the multiout connector. If using mono audio and hd retrovision cables its possible to have…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

flash.kicad_pcb

author: bschwind
Top
Bottom

2 layer board of 0.70 x 1.10 inches (17.8 x 28.0 mm)
Uploaded: June 08, 2019
Shared: December 01, 2020
Total Price: $3.85

v0.2

v0.2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

meshtastic_microusb

author: mchamster
Top
Bottom

2 layer board of 0.83 x 0.53 inches (21.0 x 13.4 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $2.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ck_gen.zip

author: tambo
Top
Bottom

4 layer board of 3.18 x 2.18 inches (80.7 x 55.4 mm)
Uploaded: July 21, 2017
Shared: December 01, 2020
Total Price: $69.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ps_pul.zip

author: tambo
Top
Bottom

4 layer board of 2.98 x 2.18 inches (75.7 x 55.4 mm)
Uploaded: July 21, 2017
Shared: December 01, 2020
Total Price: $65.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Micro Speaker Array

author: NileshVetale
Top
Bottom

4 layer board of 10.01 x 1.66 inches (254.2 x 42.2 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $166.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Liquid Sunshine v2_2020-11-30

author: DLW
Top
Bottom

2 layer board of 0.99 x 1.06 inches (25.0 x 27.0 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $5.20

https://drive.google.com/file/d/1L_AHSQdWcqbNjIDSz02LkXgUjFsSqLcq/view?usp=sharing

https://drive.google.com/file/d/1L_AHSQdWcqbNjIDSz02LkXgUjFsSqLcq/view?usp=sharing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BRD1001-001-001-320 A Counting Registers

author: JimWright4089
Top
Bottom

2 layer board of 7.88 x 1.89 inches (200.1 x 48.1 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $74.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MultiTech Universal Socket

author: groinksan
Top
Bottom

2 layer board of 3.53 x 1.36 inches (89.6 x 34.6 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $23.95

Allows the proprietary 2mm MultiTech PCB to mount to a typical prototype breadboard @ 2.54mm. The 10-pin IDC connector can be used to interface a terminal/computer (DTE) with this board (DCE.)

Allows the proprietary 2mm MultiTech PCB to mount to a typical prototype breadboard @ 2.54mm. The 10-pin IDC connector can be used to interface a terminal/computer (DTE) with this board (DCE.)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 to OG Xbox Controller breakout

author: lowtolerance
Top
Bottom

2 layer board of 0.67 x 1.39 inches (17.0 x 35.2 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $4.65

A ESP32-S2-MINI1(U) module to OG Xbox Controller plug.

(UNTESTED)

This is a super simple circuit. Aside from the ESP32 module itself, (which is less than 16mm2), there are only eight passive components, all 0603 in size.

To upload firmware to the chip initially, it'd probably be easies…

Show full description

A ESP32-S2-MINI1(U) module to OG Xbox Controller plug.

(UNTESTED)

This is a super simple circuit. Aside from the ESP32 module itself, (which is less than 16mm2), there are only eight passive components, all 0603 in size.

To upload firmware to the chip initially, it'd probably be easies…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ePenguin-Debugger

author: penguinwashere
Top
Bottom

2 layer board of 1.77 x 1.66 inches (45.1 x 42.1 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $14.65

A little debugger used for solderless debugging on production boards. Includes usart pins!

A little debugger used for solderless debugging on production boards. Includes usart pins!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LiPo Battery Low Voltage Monitor V1

author: dewhisna
Top
Bottom

2 layer board of 1.00 x 0.85 inches (25.5 x 21.7 mm)
Uploaded: November 28, 2020
Shared: November 28, 2020
Total Price: $4.25

DO NOT BUILD – this design has oscillation issues in the voltage references causing continual false alarms. It's useless…

LiPo Battery Low Voltage Monitor for 2S and 3S battery packs with audible alarm. Designed for low-end RC Airplanes to sound warning when it's time to land. Design crite…

Show full description

DO NOT BUILD – this design has oscillation issues in the voltage references causing continual false alarms. It's useless…

LiPo Battery Low Voltage Monitor for 2S and 3S battery packs with audible alarm. Designed for low-end RC Airplanes to sound warning when it's time to land. Design crite…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy