Shared Projects by spurgco

1CH Stepper Driver

WORK IN PROGRESS - USE AT OWN RISK - NO EXPRESSED WARRANTY Arduino MEGA ADK Shield for use with Adafruit i2c 16ch Servo Controller (product #815) and Adafruit Sound Trigger (product# 2341). Intended for use with SHADOW controller system as documented on Astromech.net. NOTES: The reference 5V header is actually connected, and can supply voltage to the V+ on the i2c servo board, though it is intended to give you a visual que as to the orientation of the Servo board (along with the dummy capacitor symbol). MEGA Board CAN be powered externally, rather than the barrel jack connection, though again IDK why you would do that. Stackable headers can be used to extend the Servo Boards on top of each other. The Sound Trigger will not interrupt a playing track, so I ran a signal to the reset button. This was mapped to PIN 11 on the MEGA. depending on the jumper setting of SFXRST you have two options: Pins 1-2 External Button header, and pins 2-3 connect Pin 11 on the MEGA. GOL_RST provides 5V and Signal to a relay board to trigger the Adafruit Game Of Life to reset. Signal from PIN 10 of MEGA.

Arduino MEGA ADK Shield for use with Adafruit i2c 16ch Servo Controller (product #815) and Adafruit Sound Trigger (product# 2341). Intended for use with SHADOW controller system as documented on Astromech.net. NOTES: The reference 5V header is actually connected, and can supply voltage, though it is intended to give you a visual que as to the orientation of the Servo board (along with the dummy capacitor symbol). Board CAN be powered externally, rather than the barrel jack connection, though again IDK why you would do that. Stackable headers can be used to extend the Servo Boards on top of each other. The Sound Trigger will not interrupt a playing track, so I ran a signal to the reset button. This can be mapped in the SHADOW code, or to a physical button depending on the jumper setting of RST_ENABLE. Pins 1-2 enable header, and pins 2-3 connect Pin 11 on the MEGA.