Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

AutoISP

author: microtherion
Top
Bottom

2 layer board of 1.05 x 0.60 inches (26.6 x 15.2 mm)
Uploaded: November 09, 2014
Shared: January 19, 2015
Total Price: $3.10

Automatically Switch MCU Pins Between Programmer and Board

Automatically Switch MCU Pins Between Programmer and Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AutoISP84

author: microtherion
Top
Bottom

2 layer board of 0.51 x 1.35 inches (13.0 x 34.3 mm)
Uploaded: November 09, 2014
Shared: January 19, 2015
Total Price: $3.45

AutoISP Adapter Board for ATtiny84

AutoISP Adapter Board for ATtiny84

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

US Digital S2 Encoder Quick Disconnect

author: synfinatic
Top
Bottom

2 layer board of 1.70 x 0.50 inches (43.2 x 12.7 mm)
Uploaded: January 19, 2015
Shared: January 19, 2015
Total Price: $4.25

Use an RJ9/RJ10 connector to quickly (dis)connect the encoder to your project. Perfect for telescope digital setting circles (DSC).

Project Home

Use an RJ9/RJ10 connector to quickly (dis)connect the encoder to your project. Perfect for telescope digital setting circles (DSC).

Project Home

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USBGecko SE

author: Helder
Top
Bottom

2 layer board of 1.19 x 2.08 inches (30.3 x 52.9 mm)
Uploaded: January 18, 2015
Shared: January 18, 2015
Total Price: $12.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

led_panel_pmod_RA2 copy

author: bikerglen
Top
Bottom

2 layer board of 1.59 x 0.78 inches (40.3 x 19.9 mm)
Uploaded: February 23, 2014
Shared: January 18, 2015
Total Price: $6.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Max31855

author: PanoSys
Top
Bottom

2 layer board of 1.10 x 0.60 inches (28.0 x 15.3 mm)
Uploaded: January 17, 2015
Shared: January 17, 2015
Total Price: $3.30

Max31855 Thermocouple breakout for 3.3V microcontroler (Arduino Pro Mini in my case). Capacitors are 0.1uF through hole because that's what I had around. C2 is optional. R1 is 10K and is also optional.

Currently Untested

Max31855 Thermocouple breakout for 3.3V microcontroler (Arduino Pro Mini in my case). Capacitors are 0.1uF through hole because that's what I had around. C2 is optional. R1 is 10K and is also optional.

Currently Untested

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dht22 breakout boards seperate pullup

author: moemoe
Top
Bottom

2 layer board of 0.60 x 0.30 inches (15.3 x 7.6 mm)
Uploaded: September 21, 2014
Shared: January 17, 2015
Total Price: $0.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dht22 breakout

author: moemoe
Top
Bottom

2 layer board of 0.60 x 0.30 inches (15.3 x 7.6 mm)
Uploaded: September 21, 2014
Shared: January 17, 2015
Total Price: $0.90

easy pullup and decoupling

easy pullup and decoupling

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino2560 Efi Input Shield

author: Plazomat
Top
Bottom

2 layer board of 3.09 x 1.92 inches (78.5 x 48.8 mm)
Uploaded: January 17, 2015
Shared: January 17, 2015
Total Price: $29.70

Fuel Injection shield for Speeduino

Fuel Injection shield for Speeduino

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino2560 EFI Output Shield

author: Plazomat
Top
Bottom

2 layer board of 3.09 x 1.92 inches (78.5 x 48.8 mm)
Uploaded: January 17, 2015
Shared: January 17, 2015
Total Price: $29.70

Fuel Injection shield for Speeduino

Fuel Injection shield for Speeduino

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IR repeater RX

author: Wire
Top
Bottom

2 layer board of 1.43 x 0.60 inches (36.3 x 15.3 mm)
Uploaded: August 26, 2014
Shared: January 17, 2015
Total Price: $4.30

receiver for IR repeater system

More details at http://www.wire2wire.org/IR_repeater/IR_repeater.html

receiver for IR repeater system

More details at http://www.wire2wire.org/IR_repeater/IR_repeater.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IR_repeater_tx

author: Wire
Top
Bottom

2 layer board of 1.48 x 0.60 inches (37.6 x 15.3 mm)
Uploaded: August 27, 2014
Shared: January 17, 2015
Total Price: $4.45

inferred repeater transmitter

More details at http://www.wire2wire.org/IR_repeater/IR_repeater.html

inferred repeater transmitter

More details at http://www.wire2wire.org/IR_repeater/IR_repeater.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Winbond Flash SOIC8 to DIP Single

author: DAProgs
Top
Bottom

2 layer board of 0.45 x 0.85 inches (11.4 x 21.6 mm)
Uploaded: January 16, 2015
Shared: January 16, 2015
Total Price: $1.90

Winbond Flash SOIC-8 to DIP
Single line breakout board

Winbond Flash SOIC-8 to DIP
Single line breakout board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS232_to_3V3

author: beto_peto
Top
Bottom

2 layer board of 1.20 x 0.80 inches (30.5 x 20.3 mm)
Uploaded: January 16, 2015
Shared: January 16, 2015
Total Price: $4.80

RS232 DB9 to 3V3 level converter.

RS232 DB9 to 3V3 level converter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtinyX5 Breadboard Helper v1.1

author: JChristensen
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: January 07, 2015
Shared: January 16, 2015
Total Price: $5.00

The easiest way to breadboard an ATtiny25/45/85!

The easiest way to breadboard an ATtiny25/45/85!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

gpib

author: Russ
Top
Bottom

2 layer board of 2.13 x 1.05 inches (54.2 x 26.7 mm)
Uploaded: January 16, 2015
Shared: January 16, 2015
Total Price: $11.15

USB GPIB Adapter

USB GPIB Adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cubiebreak

author: j2n
Top
Bottom

2 layer board of 2.50 x 0.85 inches (63.6 x 21.7 mm)
Uploaded: December 24, 2014
Shared: January 16, 2015
Total Price: $10.65

Cubiebreak

The Cubiebreak is a 2.0mm to 2.54mm (0.1inch) breakout for Cubieboard extension headers. The board is designed in such a way that it can be used on both extension headers or even as a generic 2mm to 0.1inch converter.

I designed it to be able to break out the headers of…

Show full description

Cubiebreak

The Cubiebreak is a 2.0mm to 2.54mm (0.1inch) breakout for Cubieboard extension headers. The board is designed in such a way that it can be used on both extension headers or even as a generic 2mm to 0.1inch converter.

I designed it to be able to break out the headers of…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CV to Potentiometer

author: NeonSilicon
Top
Bottom

2 layer board of 2.13 x 1.45 inches (54.1 x 36.7 mm)
Uploaded: December 07, 2014
Shared: January 16, 2015
Total Price: $15.35

CV input controls potentiometer or variable resistors.

Download the documentation and sample code here: Docs and code

CV input controls potentiometer or variable resistors.

Download the documentation and sample code here: Docs and code

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CV to Potentiometer SMD

author: NeonSilicon
Top
Bottom

2 layer board of 2.12 x 1.06 inches (53.8 x 26.8 mm)
Uploaded: December 07, 2014
Shared: January 16, 2015
Total Price: $11.15

CV input to potentiometer output controlled by an MCU. Download the documentation and sample code here: Docs and code

CV input to potentiometer output controlled by an MCU. Download the documentation and sample code here: Docs and code

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

B27 14-pin DIP Protoboard

author: CTI
Top
Bottom

2 layer board of 1.40 x 0.80 inches (35.5 x 20.2 mm)
Uploaded: January 16, 2015
Shared: January 16, 2015
Total Price: $5.55

B27 14-pin DIP Proto board.

My 27th experimental board. It allows a 14-pin DIP to be physically mounted in a project and hard wired into a circuit. There are two holes wired to each pin of the circuit which may alternatively host some sort of header on 0.1 inch centers.

In addition, there…

Show full description

B27 14-pin DIP Proto board.

My 27th experimental board. It allows a 14-pin DIP to be physically mounted in a project and hard wired into a circuit. There are two holes wired to each pin of the circuit which may alternatively host some sort of header on 0.1 inch centers.

In addition, there…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy