Shared projects

20 charlie plexed LEDs

2 layer board of 0.40 x 0.40 inches (10.2 x 10.2 mm).
Shared on October 23rd, 2017 20:29

20x 0402 LEDs

Put the anode on the outside. The LEDs are connected as you can see here https://hackaday.io/page/3791-charlie-plexed-icosahedron

LED1 has it’s cathode(-) on pin one when you solder the cathode on the outside.


20 charlie plexed LEDs

2 layer board of 0.40 x 0.40 inches (10.2 x 10.2 mm).
Shared on October 23rd, 2017 20:29

20x 0402 LEDs

Put the anode on the outside. The LEDs are connected as you can see here https://hackaday.io/page/3791-charlie-plexed-icosahedron

LED1 has it’s cathode(-) on pin one when you solder the cathode on the outside.



USBASP / USBISP with conversion

2 layer board of 0.80 x 1.00 inches (20.3 x 25.4 mm).
Shared on September 15th, 2017 18:41

see https://hackaday.io/project/26831-a-true-in-system-programmer


USBASP / USBISP with conversion

2 layer board of 0.80 x 1.00 inches (20.3 x 25.4 mm).
Shared on September 15th, 2017 18:41

see https://hackaday.io/project/26831-a-true-in-system-programmer



Wemos D1 Mini Game Boy Link Port shield

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm).
Shared on September 3rd, 2017 15:11

First design failed, connector was designed wrong :D


Wemos D1 Mini Game Boy Link Port shield

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm).
Shared on September 3rd, 2017 15:11

First design failed, connector was designed wrong :D



bargraph_smd_HIGH.brd

2 layer board of 0.30 x 0.90 inches (7.6 x 22.9 mm).
Shared on June 22nd, 2017 09:56


bargraph_smd_HIGH.brd

2 layer board of 0.30 x 0.90 inches (7.6 x 22.9 mm).
Shared on June 22nd, 2017 09:56



Flux Capacitor REV2

2 layer board of 1.00 x 1.20 inches (25.4 x 30.5 mm).
Shared on June 17th, 2017 13:33

or “Fluxkompensator” as we Germans call it… this is Version 3, with a battery holder and a switch (finally!) Battery holder is for 12mm batteries, holder is the cheapest on ebay. should work with attinyX5 and attiny13. 0805 resistors.

https://hackaday.io/project/25898-flux-capacitor-trinket


Flux Capacitor REV2

2 layer board of 1.00 x 1.20 inches (25.4 x 30.5 mm).
Shared on June 17th, 2017 13:33

or “Fluxkompensator” as we Germans call it… this is Version 3, with a battery holder and a switch (finally!) Battery holder is for 12mm batteries, holder is the cheapest on ebay. should work with attinyX5 and attiny13. 0805 resistors.

https://hackaday.io/project/25898-flux-capacitor-trinket