Icetube Clock - Transistor - Rev C
2 layer board of 4.50 x 1.08 inches (114.4 x 27.4 mm)
Uploaded:
February 06, 2015
Shared:
February 06, 2015
Total Price:
$24.25
A version of the Adafruit Icetube clock main board that will accept either a ZVP2110A FET (use a jumper wire for R6) or a PN2907 transistor for Q3 and use 470 ohm (min value) - 1K ohm (max value) for resistor R6. Suggest using firmware found here for the clock. https://github.com/johngarchie/xm…
Show full description
A version of the Adafruit Icetube clock main board that will accept either a ZVP2110A FET (use a jumper wire for R6) or a PN2907 transistor for Q3 and use 470 ohm (min value) - 1K ohm (max value) for resistor R6. Suggest using firmware found here for the clock. https://github.com/johngarchie/xm…
Show full description
Icetube Clock Tube Board
2 layer board of 1.13 x 1.07 inches (28.8 x 27.3 mm)
Uploaded:
September 23, 2013
Shared:
October 25, 2014
Total Price:
$6.05
Replacement Tube board for the Icetube Clock based on the Adafruit board.
Replacement Tube board for the Icetube Clock based on the Adafruit board.
IceTube-RevB-MainBoard
2 layer board of 4.50 x 1.06 inches (114.4 x 26.9 mm)
Uploaded:
October 25, 2014
Shared:
October 25, 2014
Total Price:
$23.80
Main IceTube clock board Clone of the Adafruit main board with a few minor adjustments
Main IceTube clock board Clone of the Adafruit main board with a few minor adjustments
