Icetube Clock - Transistor - Rev C
author: PhilD13
2 layer board of 4.50 x 1.08 inches (114.4 x 27.4 mm)
Uploaded:
February 06, 2015
Shared:
February 06, 2015
Total Price:
$24.25
A version of the Adafruit Icetube clock main board that will accept either a ZVP2110A FET (use a jumper wire for R6) or a PN2907 transistor for Q3 and use 470 ohm (min value) - 1K ohm (max value) for resistor R6. Suggest using firmware found here for the clock. https://github.com/johngarchie/xmas-icetube/
A version of the Adafruit Icetube clock main board that will accept either a ZVP2110A FET (use a jumper wire for R6) or a PN2907 transistor for Q3 and use 470 ohm (min value) - 1K ohm (max value) for resistor R6. Suggest using firmware found here for the clock. https://github.com/johngarchie/xmas-icetube/
