I²C Motor MOSFET Controller v0.3.1-pi
author: pixnbits-hardware
2 layer board of 2.56 x 1.18 inches (64.9 x 30.0 mm)
Uploaded:
June 30, 2017
Shared:
December 03, 2017
Total Price:
$15.05
Control the Gates of 16 MOSFETs of common GND and VCC via I²C. Designed as a Raspberry Pi hat. I²C address via DIP switches. TODO: add BoM 😓
4 pairs of 2P/2N channel, for H-bridges.
MOSFET GND and VCC used for Gate differential signals but not connected to Source on board to not limit curre…
Show full description
Control the Gates of 16 MOSFETs of common GND and VCC via I²C. Designed as a Raspberry Pi hat. I²C address via DIP switches. TODO: add BoM 😓
4 pairs of 2P/2N channel, for H-bridges.
MOSFET GND and VCC used for Gate differential signals but not connected to Source on board to not limit curre…
Show full description
PixelPower v0.1
author: TacSnac
2 layer board of 0.75 x 1.00 inches (19.0 x 25.4 mm)
Uploaded:
December 02, 2017
Shared:
December 02, 2017
Total Price:
$3.75
Arduino Nano to WS2801 LED Adapter Board. Connects pins D2, D3 and GND from the Arduino to a string of WS2801 addressable LED's as well as power from a 5V AC adapter. Will be used to power a string on my Christmas tree or desk at work. Board is tested and functions properly. Might add another rev…
Show full description
Arduino Nano to WS2801 LED Adapter Board. Connects pins D2, D3 and GND from the Arduino to a string of WS2801 addressable LED's as well as power from a 5V AC adapter. Will be used to power a string on my Christmas tree or desk at work. Board is tested and functions properly. Might add another rev…
Show full description
Positive_Power_Distribution.kicad_pcb
author: rogding
2 layer board of 2.41 x 1.46 inches (61.1 x 37.0 mm)
Uploaded:
February 22, 2017
Shared:
December 02, 2017
Total Price:
$17.50
One (1) input to ten (10) regulated outputs through LM78xx.
One (1) input to ten (10) regulated outputs through LM78xx.
dd_matrix.zip
author: drnobodyphd
2 layer board of 10.00 x 0.73 inches (254.0 x 18.6 mm)
Uploaded:
December 01, 2017
Shared:
December 01, 2017
Total Price:
$36.55
BLE Array
BLE Array
furcur.zip
author: gryphonhouse
2 layer board of 2.50 x 2.00 inches (63.5 x 50.8 mm)
Uploaded:
November 29, 2017
Shared:
December 01, 2017
Total Price:
$25.00
"Furnace Current" UI PCB
"Furnace Current" UI PCB
Sid Vadaparty - CirKinemeter v1.1.zip
author: GearsNGenes
2 layer board of 1.70 x 5.20 inches (43.2 x 132.1 mm)
Uploaded:
September 01, 2017
Shared:
December 01, 2017
Total Price:
$44.20
Accelerometer_v1-0.brd
author: GearsNGenes
2 layer board of 1.41 x 3.21 inches (35.7 x 81.5 mm)
Uploaded:
September 01, 2017
Shared:
December 01, 2017
Total Price:
$22.50
CirKinemeter v1-2 (1).brd
author: GearsNGenes
2 layer board of 1.70 x 5.20 inches (43.2 x 132.1 mm)
Uploaded:
November 24, 2017
Shared:
December 01, 2017
Total Price:
$44.20
Next Cirkinemeter
Next Cirkinemeter
blink1-ws2812-adapter
author: todbot
2 layer board of 0.53 x 0.57 inches (13.4 x 14.4 mm)
Uploaded:
November 29, 2017
Shared:
November 30, 2017
Total Price:
$1.45
Adapter for WS2812 / Neopixel LEDs for blink(1) mk2 USB notification LED.
Parts needed:
- 3-pin 0.1" header or header socket for LED strip connection
- 3 "pins" from a header, removed from header, to connect PCB to blink(1)
Links:
- [https://blink1.thingm.com/](https://blink1.th…
Show full description
Adapter for WS2812 / Neopixel LEDs for blink(1) mk2 USB notification LED.
Parts needed:
- 3-pin 0.1" header or header socket for LED strip connection
- 3 "pins" from a header, removed from header, to connect PCB to blink(1)
Links:
- [https://blink1.thingm.com/](https://blink1.th…
Show full description
LoFASM ARX
author: jmurray1241
2 layer board of 4.30 x 2.59 inches (109.2 x 65.7 mm)
Uploaded:
August 08, 2014
Shared:
November 30, 2017
Total Price:
$55.60
dsh PSRAM Test V0
author: dsh0005
2 layer board of 1.98 x 1.98 inches (50.2 x 50.2 mm)
Uploaded:
November 30, 2017
Shared:
November 30, 2017
Total Price:
$19.50
Test for PSRAM BGA soldering Warning: This violates the DRC, uses width/space of 4/4. Or was it 5/5? Github
Test for PSRAM BGA soldering Warning: This violates the DRC, uses width/space of 4/4. Or was it 5/5? Github
Quadrigotion TMC2660 [old]
author: hzeller
4 layer board of 4.93 x 1.58 inches (125.1 x 40.1 mm)
Uploaded:
November 30, 2017
Shared:
November 30, 2017
Total Price:
$77.70
[old version; look for latest in my projects]
[old version; look for latest in my projects]
Simple Constant Current Driver v1.9
author: Jason-DoesItAll
2 layer board of 2.42 x 1.42 inches (61.3 x 36.0 mm)
Uploaded:
November 29, 2017
Shared:
November 30, 2017
Total Price:
$17.05
A basic 2-transistor (thru-hole) constant-current LED driver jumper configurable for 0-15 thru-hole or 0603 LEDs on board, and with an optional potentiometer to control current. Details are at <http://www.JasonDoesItAll.com/ccdriver/>.
A basic 2-transistor (thru-hole) constant-current LED driver jumper configurable for 0-15 thru-hole or 0603 LEDs on board, and with an optional potentiometer to control current. Details are at <http://www.JasonDoesItAll.com/ccdriver/>.
