Shared Projects

Shared Projects

VE6JI_OCXO_12v_Supply.brd

author: VE6JI
Top
Bottom

2 layer board of 0.81 x 1.01 inches (20.5 x 25.6 mm)
Uploaded: December 07, 2017
Shared: December 07, 2017
Total Price: $4.05

Regulate the common ham voltage of 13.8Vdc to 12.0Vdc. Useful for supplying 12V OCXO

Regulate the common ham voltage of 13.8Vdc to 12.0Vdc. Useful for supplying 12V OCXO

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AguaInfo_v1.0.brd

author: Kestler
Top
Bottom

2 layer board of 3.00 x 2.41 inches (76.3 x 61.1 mm)
Uploaded: November 11, 2017
Shared: December 07, 2017
Total Price: $36.10

Aguainfo Automatic dispenser

Aguainfo Automatic dispenser

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MouseSelect V1.2

author: AtariBits
Top
Bottom

2 layer board of 0.81 x 1.69 inches (20.5 x 42.8 mm)
Uploaded: November 14, 2017
Shared: December 07, 2017
Total Price: $6.75

1088XEL Accessory: Mouse Port Selection/Indication

1088XEL Accessory: Mouse Port Selection/Indication

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MouseSelect_nopanel V1.2

author: AtariBits
Top
Bottom

2 layer board of 0.81 x 1.36 inches (20.5 x 34.4 mm)
Uploaded: November 16, 2017
Shared: December 07, 2017
Total Price: $5.45

1088XEL Accessory: Mouse Port Selection/Indication

1088XEL Accessory: Mouse Port Selection/Indication

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

XEL LED Status Panel

author: AtariBits
Top
Bottom

2 layer board of 3.51 x 0.61 inches (89.0 x 15.4 mm)
Uploaded: December 07, 2017
Shared: December 07, 2017
Total Price: $10.60

1088XEL Accessory: LED Status Panel

1088XEL Accessory: LED Status Panel

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

makey_makey-v12.1.brd

author: jfryar30272
Top
Bottom

2 layer board of 3.71 x 1.91 inches (94.2 x 48.5 mm)
Uploaded: November 02, 2017
Shared: December 07, 2017
Total Price: $35.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HEDL to RJ45 Breakout.kicad_pcb

author: JanBeck
Top
Bottom

2 layer board of 1.11 x 1.46 inches (28.1 x 37.0 mm)
Uploaded: October 27, 2017
Shared: December 07, 2017
Total Price: $8.05

I connect to a lot of encoders in various projects, and usually, I will try to hook them up to a RJ45 connector, as described here: https://sites.google.com/site/janbeck/hedl-encoder-to-rj45-adapter-board

This board primarily targets HEDL encoders, but can also be used with others, by either …

Show full description

I connect to a lot of encoders in various projects, and usually, I will try to hook them up to a RJ45 connector, as described here: https://sites.google.com/site/janbeck/hedl-encoder-to-rj45-adapter-board

This board primarily targets HEDL encoders, but can also be used with others, by either …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BAR30-SENSOR.brd

author: decent-design
Top
Bottom

2 layer board of 0.45 x 0.45 inches (11.5 x 11.5 mm)
Uploaded: December 07, 2017
Shared: December 07, 2017
Total Price: $1.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Eagle_Teensy3_6_TAF_BoardV2.1.brd

author: whmehaff
Top
Bottom

2 layer board of 2.78 x 2.05 inches (70.6 x 52.1 mm)
Uploaded: December 06, 2017
Shared: December 06, 2017
Total Price: $28.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

chip_holder_v6_new_cryo.brd

author: jisland
Top
Bottom

2 layer board of 1.13 x 0.75 inches (28.6 x 19.0 mm)
Uploaded: December 06, 2017
Shared: December 06, 2017
Total Price: $4.20

Auston chip new holder

Auston chip new holder

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3DO USB QSB

author: citrus3000psi
Top
Bottom

2 layer board of 2.20 x 1.48 inches (56.0 x 37.6 mm)
Uploaded: November 13, 2017
Shared: December 06, 2017
Total Price: $16.30

This is designed to be used with Mnemo's 3DO USB loader with an FZ-10

Parts required:

WM17463-ND

609-5104-ND

609-1747-ND

**One connector has 2 extra pins as it carries gnd/+5 to the device. Make sure to install the cable ends in the correct direction.

This is designed to be used with Mnemo's 3DO USB loader with an FZ-10

Parts required:

WM17463-ND

609-5104-ND

609-1747-ND

**One connector has 2 extra pins as it carries gnd/+5 to the device. Make sure to install the cable ends in the correct direction.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Owl HC

author: gryphonhouse
Top
Bottom

2 layer board of 2.50 x 2.00 inches (63.5 x 50.8 mm)
Uploaded: April 21, 2017
Shared: December 06, 2017
Total Price: $25.00

A higher current OWL - Should I call it HOWL?

A higher current OWL - Should I call it HOWL?

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OpticSpy Analog (Rev. B)

author: joegrand
Top
Bottom

2 layer board of 1.86 x 1.68 inches (47.2 x 42.6 mm)
Uploaded: December 02, 2017
Shared: December 06, 2017
Total Price: $15.55

Receiver module for Optical Covert Channel experiments.

Analog version based on Maxim Integrated’s AN1117 application note.

Rev. B includes potentiometers and test points for easier configuration.

Receiver module for Optical Covert Channel experiments.

Analog version based on Maxim Integrated’s AN1117 application note.

Rev. B includes potentiometers and test points for easier configuration.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Quadrigotion TMC2660

author: hzeller
Top
Bottom

4 layer board of 4.93 x 1.58 inches (125.1 x 40.1 mm)
Uploaded: December 06, 2017
Shared: December 06, 2017
Total Price: $77.70

Four stepper drivers, one simple connector.

Based on sophisticated TMC2660; 24V 2.8A RMS (4A peak) per motor phase.

https://github.com/hzeller/quadrigotion

Four stepper drivers, one simple connector.

Based on sophisticated TMC2660; 24V 2.8A RMS (4A peak) per motor phase.

https://github.com/hzeller/quadrigotion

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AccelerationDataLogger v1 board

author: fclad
Top
Bottom

2 layer board of 3.08 x 3.10 inches (78.2 x 78.8 mm)
Uploaded: December 06, 2017
Shared: December 06, 2017
Total Price: $47.75

An open source acceleration data logger board and software, using widely available MEMS

An open source acceleration data logger board and software, using widely available MEMS

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny13 LED matrix badge

author: luca-anastasio
Top
Bottom

2 layer board of 2.01 x 2.01 inches (51.0 x 51.0 mm)
Uploaded: December 05, 2017
Shared: December 05, 2017
Total Price: $20.20

Simple charlieplexed LED matrix Source and firmware

Simple charlieplexed LED matrix Source and firmware

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB potentiostat/galvanostat, Detavernier research group

author: danielfp248
Top
Bottom

2 layer board of 1.98 x 1.98 inches (50.2 x 50.2 mm)
Uploaded: December 05, 2017
Shared: December 05, 2017
Total Price: $19.50

This is the potentiostat published here http://www.sciencedirect.com/science/article/pii/S2468067217300317#!. Shared here with permission of the author.

This is the potentiostat published here http://www.sciencedirect.com/science/article/pii/S2468067217300317#!. Shared here with permission of the author.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MS5534 breakout

author: elmot
Top
Bottom

2 layer board of 0.66 x 0.65 inches (16.8 x 16.5 mm)
Uploaded: November 17, 2017
Shared: December 05, 2017
Total Price: $2.15

https://github.com/elmot/barologger

https://github.com/elmot/barologger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TBuzz 1.0 Tracker

author: Buzzfpv
Top
Bottom

2 layer board of 1.27 x 3.23 inches (32.2 x 82.1 mm)
Uploaded: December 04, 2017
Shared: December 04, 2017
Total Price: $20.45

VTXTracker for fpv

VTXTracker for fpv

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Charger.brd

author: Darthwingdoc
Top
Bottom

2 layer board of 1.07 x 1.02 inches (27.2 x 25.9 mm)
Uploaded: December 04, 2017
Shared: December 04, 2017
Total Price: $5.45

Battery charger and boost converter based on the HT4936S - V1 test

Battery charger and boost converter based on the HT4936S - V1 test

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy