2 layer board of 2.00 x 1.03 inches (50.9 x 26.2 mm)
Uploaded:
February 16, 2018
Shared:
May 23, 2018
Total Price:
$10.30
Plugs into an J-Link to convert the 100mil 20-pin header into a 100mil and 50mil 10-pin headers with standard SWD pinout. A reset switch and some test loops are also provided.
Because of the depth of the header on the J-Link relative to the housing and the limited selection of heights of fema…
Plugs into an J-Link to convert the 100mil 20-pin header into a 100mil and 50mil 10-pin headers with standard SWD pinout. A reset switch and some test loops are also provided.
Because of the depth of the header on the J-Link relative to the housing and the limited selection of heights of female SMT headers, I recommend using a piece of ~1/16" or 2mm thick craft foam as a spacer between the bottom of the board and the J-Link. It can be cut to the outline of this board, with a rectangle cutout for the header on the bottom, and glued or double-stick-taped to the bottom of the PCB.
# Manufacturer MFR PN Quantity Qty Ext'd Value Description Designator
------------------------------------------------------------------------------------
1 Kingbright APTD1608CGCK 1 100 Green 0603 LED Green 60° 230mcd 570nm D1
2 3M Interconnect Solutions 966210-2000-AR=PR 2 200 966210 J1, J2
3 Amphenol FCI 20021521-00010T1LF 1 100 J3
4 3M Interconnect Solutions N2510-6V0C-RB-WD 1 100 J4
5 KOA Speer RK73H1JTTD1000F 1 100 100 100Ω 100mW 1% 100 PPM/°C 0603 Thick Film Resistor R1
6 KOA Speer RK73H1JTTD2201F 1 100 2k2 2k2Ω 100mW 1% 100 PPM/°C 0603 Thick Film Resistor R2
7 Wurth Electronik 430 182 095 816 1 100 430 182 095 816 SW1
8 Keystone Electronics Corp 5015 6 600 5015 SMT Micro Miniature test point TP1, TP2, TP3, TP4, TP5, TP6
Show full description
Plugs into an J-Link to convert the 100mil 20-pin header into a 100mil and 50mil 10-pin headers with standard SWD pinout. A reset switch and some test loops are also provided.
Because of the depth of the header on the J-Link relative to the housing and the limited selection of heights of fema…
Plugs into an J-Link to convert the 100mil 20-pin header into a 100mil and 50mil 10-pin headers with standard SWD pinout. A reset switch and some test loops are also provided.
Because of the depth of the header on the J-Link relative to the housing and the limited selection of heights of female SMT headers, I recommend using a piece of ~1/16" or 2mm thick craft foam as a spacer between the bottom of the board and the J-Link. It can be cut to the outline of this board, with a rectangle cutout for the header on the bottom, and glued or double-stick-taped to the bottom of the PCB.
# Manufacturer MFR PN Quantity Qty Ext'd Value Description Designator
------------------------------------------------------------------------------------
1 Kingbright APTD1608CGCK 1 100 Green 0603 LED Green 60° 230mcd 570nm D1
2 3M Interconnect Solutions 966210-2000-AR=PR 2 200 966210 J1, J2
3 Amphenol FCI 20021521-00010T1LF 1 100 J3
4 3M Interconnect Solutions N2510-6V0C-RB-WD 1 100 J4
5 KOA Speer RK73H1JTTD1000F 1 100 100 100Ω 100mW 1% 100 PPM/°C 0603 Thick Film Resistor R1
6 KOA Speer RK73H1JTTD2201F 1 100 2k2 2k2Ω 100mW 1% 100 PPM/°C 0603 Thick Film Resistor R2
7 Wurth Electronik 430 182 095 816 1 100 430 182 095 816 SW1
8 Keystone Electronics Corp 5015 6 600 5015 SMT Micro Miniature test point TP1, TP2, TP3, TP4, TP5, TP6
Show full description
