Shared Projects by GertSanders

Shared Projects by GertSanders

minimal-adapter-8pin

Top
Bottom

2 layer board of 0.51 x 0.51 inches (12.9 x 12.8 mm)
Uploaded: March 13, 2020
Shared: March 13, 2020
Total Price: $1.25

minimal breadboard adapter for 8pin devices (NRF24, ESP01, etc)

minimal breadboard adapter for 8pin devices (NRF24, ESP01, etc)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8 HC-SR04 Scanner

Top
Bottom

2 layer board of 1.20 x 1.15 inches (30.5 x 29.2 mm)
Uploaded: March 11, 2018
Shared: March 28, 2018
Total Price: $6.90

Based on the original by Andrew Kramer for his Colin robot. But updated with the new ATTiny841 (and mounting holes). All caps and resistors are 0805 format R1 = 10K R2, R3 = 4K7 (optional pullup resistors) C3 = 100nF C4 = 10uF standard pinheaders are used for all connectors. The processor …

Show full description

Based on the original by Andrew Kramer for his Colin robot. But updated with the new ATTiny841 (and mounting holes). All caps and resistors are 0805 format R1 = 10K R2, R3 = 4K7 (optional pullup resistors) C3 = 100nF C4 = 10uF standard pinheaders are used for all connectors. The processor …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RaspNRF24-V3

Top
Bottom

2 layer board of 1.40 x 0.75 inches (35.6 x 19.0 mm)
Uploaded: February 17, 2018
Shared: February 17, 2018
Total Price: $5.25

This board uses the default wiring as specified on the MySensors page: https://www.mysensors.org/build/raspberry#improving-throughput-for-nrf24

This board uses the default wiring as specified on the MySensors page: https://www.mysensors.org/build/raspberry#improving-throughput-for-nrf24

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RaspNRF24-V2.brd

Top
Bottom

2 layer board of 1.40 x 0.75 inches (35.6 x 19.0 mm)
Uploaded: December 29, 2016
Shared: April 13, 2017
Total Price: $5.25

RaspNRF24-V2, tested to work. C1 is 100uF C2 is 10uF C3 is 100nF IC1 is ASM1117 3.3V The NRF24L01 is a module with ceramic antenna. This sits on the top side. The IRQ pin is connected to PIN18 on the Raspberry header. The two row header starts at pin 1 (where JP1 is written) and sits on the…

Show full description

RaspNRF24-V2, tested to work. C1 is 100uF C2 is 10uF C3 is 100nF IC1 is ASM1117 3.3V The NRF24L01 is a module with ceramic antenna. This sits on the top side. The IRQ pin is connected to PIN18 on the Raspberry header. The two row header starts at pin 1 (where JP1 is written) and sits on the…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Low Power Node SMD v1 (CR1632 battery)

Top
Bottom

2 layer board of 0.80 x 0.90 inches (20.3 x 22.9 mm)
Uploaded: March 24, 2016
Shared: March 27, 2016
Total Price: $3.60

Untested

Untested

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy