Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

20pin JTAG/SWD Adapter

author: esden
Top
Bottom

2 layer board of 0.56 x 1.07 inches (14.2 x 27.2 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $2.95

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. Both connectors are thro…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. Both connectors are thro…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dronecode SWD Debug Adapter

author: esden
Top
Bottom

2 layer board of 0.72 x 1.11 inches (18.2 x 28.2 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $3.95

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a standard Dronecode UAV autopilot.

This adapter board design is part of the [1BitSquared adapter collection](https://g…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a standard Dronecode UAV autopilot.

This adapter board design is part of the [1BitSquared adapter collection](https://g…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PMOD JTAG Adapter

author: esden
Top
Bottom

2 layer board of 0.79 x 0.62 inches (20.1 x 15.6 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $2.40

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a PMOD interface popular on FPGA development boards. When using an IP core with JTAG/SWD interface this adapter makes it easy to connect an ARM Cortex …

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a PMOD interface popular on FPGA development boards. When using an IP core with JTAG/SWD interface this adapter makes it easy to connect an ARM Cortex …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino ProMini NeoPixel Driver

author: GreenMoonArt
Top
Bottom

2 layer board of 2.44 x 1.85 inches (61.9 x 47.0 mm)
Uploaded: November 05, 2017
Shared: December 13, 2017
Total Price: $22.55

Drive up to 6 NeoPixel LED strands. Sensor input available (e.g., photoresistor).

Drive up to 6 NeoPixel LED strands. Sensor input available (e.g., photoresistor).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BTM7710GP Break Out

author: GreenMoonArt
Top
Bottom

2 layer board of 1.80 x 1.85 inches (45.7 x 47.0 mm)
Uploaded: December 12, 2017
Shared: December 13, 2017
Total Price: $16.65

Automotive H-Bridge SMD IC with all pins broken out

Automotive H-Bridge SMD IC with all pins broken out

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TeensyHID

author: mtrudel
Top
Bottom

2 layer board of 1.41 x 1.05 inches (35.7 x 26.7 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $7.35

A simple breakout for the Teensy, providing mounts for 1 or 2 Bourns PEC11 rotary encoders and 4 Digital / Analog IO via JST connectors. The IO connectors also break out two I2C connectors.

A simple breakout for the Teensy, providing mounts for 1 or 2 Bourns PEC11 rotary encoders and 4 Digital / Analog IO via JST connectors. The IO connectors also break out two I2C connectors.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

20Pin JTAG/SWD half SMD Adapter

author: esden
Top
Bottom

2 layer board of 0.68 x 1.07 inches (17.2 x 27.2 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $3.60

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. This is why the 20pin po…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. This is why the 20pin po…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARM Crotex 10pin to 7pin breakout adapter

author: esden
Top
Bottom

2 layer board of 0.79 x 0.52 inches (20.1 x 13.1 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $2.00

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to any arbitrary 100mil (0.1inch / 2.54mm) pitch connectors using flywires. The pinout of the 7pin connector is compatible with targets using the STMicroe…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to any arbitrary 100mil (0.1inch / 2.54mm) pitch connectors using flywires. The pinout of the 7pin connector is compatible with targets using the STMicroe…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Black Magic 4pin 50mil Serial Wire Debug Adapter

author: esden
Top
Bottom

2 layer board of 0.61 x 0.26 inches (15.4 x 6.6 mm)
Uploaded: December 12, 2017
Shared: December 13, 2017
Total Price: $0.75

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the debug port of another Black Magic Probe. This allows the programming of the bootloader as well as debugging of the Black Magic Probe firmware. This…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the debug port of another Black Magic Probe. This allows the programming of the bootloader as well as debugging of the Black Magic Probe firmware. This…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LEGO RCX IR Hack

author: JamesHagerman
Top
Bottom

2 layer board of 0.90 x 0.45 inches (22.9 x 11.5 mm)
Uploaded: February 09, 2014
Shared: December 13, 2017
Total Price: $2.00

A LEGO RCX IR Tower on a mini Arduino shield.

This board has errors! I haven't had a chance to update the design. The header for the arduino pins is off by one.

https://github.com/JamesHagerman/HardwareProjects/tree/master/LEGO_RCX_Tower

A LEGO RCX IR Tower on a mini Arduino shield.

This board has errors! I haven't had a chance to update the design. The header for the arduino pins is off by one.

https://github.com/JamesHagerman/HardwareProjects/tree/master/LEGO_RCX_Tower

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Constant-Current LED Clock.kicad_pcb

author: lpmusix
Top
Bottom

2 layer board of 3.35 x 1.50 inches (85.2 x 38.2 mm)
Uploaded: December 06, 2017
Shared: December 13, 2017
Total Price: $25.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IDT_Clock_Block.kicad_pcb

author: KD5SSJ
Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded: December 12, 2017
Shared: December 13, 2017
Total Price: $28.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

24V Buck Circle Layout

author: Junes-PhD
Top
Bottom

2 layer board of 1.88 x 1.75 inches (47.7 x 44.4 mm)
Uploaded: June 09, 2017
Shared: December 13, 2017
Total Price: $16.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shah Frame

author: Junes-PhD
Top
Bottom

2 layer board of 6.01 x 4.01 inches (152.6 x 101.8 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $120.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shah Headshot

author: Junes-PhD
Top
Bottom

2 layer board of 4.01 x 4.01 inches (101.8 x 101.8 mm)
Uploaded: December 13, 2017
Shared: December 13, 2017
Total Price: $80.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

17mm 6 LED tail board

author: Lexel
Top
Bottom

2 layer board of 0.68 x 0.68 inches (17.2 x 17.2 mm)
Uploaded: November 07, 2017
Shared: December 13, 2017
Total Price: $2.25

for pilotdog68 or similar tail boards

for pilotdog68 or similar tail boards

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PwrModuleDrive.brd

author: jkinkennon
Top
Bottom

2 layer board of 1.50 x 2.64 inches (38.1 x 67.0 mm)
Uploaded: December 01, 2017
Shared: December 13, 2017
Total Price: $19.75

SSR driver for Pi using SPI

SSR driver for Pi using SPI

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Roland Adapter.brd

author: jkinkennon
Top
Bottom

2 layer board of 3.40 x 1.99 inches (86.4 x 50.5 mm)
Uploaded: March 21, 2017
Shared: December 13, 2017
Total Price: $33.75

Roland keyboard to Kinkennon encoder

Roland keyboard to Kinkennon encoder

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINIDCC Booster

author: geekboy1011
Top
Bottom

2 layer board of 2.00 x 0.80 inches (50.8 x 20.2 mm)
Uploaded: December 12, 2017
Shared: December 12, 2017
Total Price: $7.95

DCC booster for comminicating and powering model trains

DCC booster for comminicating and powering model trains

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Motor Control

author: wireup
Top
Bottom

2 layer board of 1.99 x 2.38 inches (50.4 x 60.4 mm)
Uploaded: December 12, 2017
Shared: December 12, 2017
Total Price: $23.60

DRV8432

DRV8432

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy