Shared Projects

Shared Projects

threaddemo_signalled-

author: JacobMiske
Top
Bottom

2 layer board of 1.50 x 1.20 inches (38.2 x 30.6 mm)
Uploaded: August 15, 2019
Shared: August 15, 2019
Total Price: $9.05

Boss302 for isaac nelson rev1

Boss302 for isaac nelson rev1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB FT81x Display Controller Board

author: TerryC
Top
Bottom

2 layer board of 2.76 x 1.97 inches (70.0 x 50.0 mm)
Uploaded: August 15, 2019
Shared: August 15, 2019
Total Price: $27.10

For FTDI FT810/812 chip. Uses de facto standard 40-way FFC connector. Has built-in sounder for FT81x audio functions.

For FTDI FT810/812 chip. Uses de facto standard 40-way FFC connector. Has built-in sounder for FT81x audio functions.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi DMX512 Crust

author: TerryC
Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.0 x 56.0 mm)
Uploaded: August 15, 2019
Shared: August 15, 2019
Total Price: $28.20

PiCrust: DMX512 for structural installations (8P8C connector) R1 is 120R, all other resistors are 1K. C1/C2 are 20nF. Software HAT compatibility - currently untested.

PiCrust: DMX512 for structural installations (8P8C connector) R1 is 120R, all other resistors are 1K. C1/C2 are 20nF. Software HAT compatibility - currently untested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MC Cthulhu EZ PCB v1.0

author: Arthrimus
Top
Bottom

2 layer board of 3.80 x 1.78 inches (96.5 x 45.2 mm)
Uploaded: August 15, 2019
Shared: August 15, 2019
Total Price: $33.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

microSD reflow board

author: Tweepy
Top
Bottom

2 layer board of 1.02 x 0.82 inches (26.0 x 20.9 mm)
Uploaded: March 12, 2015
Shared: August 15, 2019
Total Price: $4.20

breakout and reflow for micro SD card

breakout and reflow for micro SD card

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Test adapter for potentiometer TK

author: ToneKeeper
Top
Bottom

2 layer board of 0.56 x 0.31 inches (14.1 x 7.8 mm)
Uploaded: August 14, 2019
Shared: August 14, 2019
Total Price: $0.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MM7150 Breakout v1

author: ccapo
Top
Bottom

2 layer board of 0.77 x 1.09 inches (19.5 x 27.6 mm)
Uploaded: March 21, 2018
Shared: August 14, 2019
Total Price: $4.15

Breakout for MM7150 Sensor Fusion board

Breakout for MM7150 Sensor Fusion board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATX Breakout

author: nbetham
Top
Bottom

2 layer board of 2.10 x 1.40 inches (53.4 x 35.6 mm)
Uploaded: July 24, 2015
Shared: August 13, 2019
Total Price: $14.70

Breakout board for powering a reprap 3D printer

Breakout board for powering a reprap 3D printer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4th order Active Filter PCB

author: rlramirez77
Top
Bottom

2 layer board of 1.78 x 0.99 inches (45.2 x 25.2 mm)
Uploaded: September 14, 2015
Shared: August 13, 2019
Total Price: $8.80

A 4th order audio filter for CW audio, etc.

A 4th order audio filter for CW audio, etc.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

808 Resto - SPFC - Symmetric - 2019-08-13

author: enbylenore
Top
Bottom

2 layer board of 1.31 x 2.77 inches (33.3 x 70.3 mm)
Uploaded: August 13, 2019
Shared: August 13, 2019
Total Price: $18.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Opti-Cal Sensor and IO Assy Rev. 3

author: Altronic-Research-Inc
Top
Bottom

2 layer board of 2.78 x 1.12 inches (70.6 x 28.4 mm)
Uploaded: August 13, 2019
Shared: August 13, 2019
Total Price: $15.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZEMCT131CMon.v01a

author: PeskyProducts
Top
Bottom

2 layer board of 0.90 x 0.90 inches (22.9 x 22.9 mm)
Uploaded: August 13, 2019
Shared: August 13, 2019
Total Price: $4.05

Breakout to test ZEMCT131A AC current monitor. Modified circuit to work better.

Breakout to test ZEMCT131A AC current monitor. Modified circuit to work better.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

July

author: methuzla
Top
Bottom

2 layer board of 0.40 x 0.45 inches (10.2 x 11.5 mm)
Uploaded: August 13, 2019
Shared: August 13, 2019
Total Price: $0.90

JST SH 4 to breadboard adapter.

JST SH 4 to breadboard adapter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

June

author: methuzla
Top
Bottom

2 layer board of 0.60 x 0.58 inches (15.3 x 14.6 mm)
Uploaded: August 09, 2019
Shared: August 13, 2019
Total Price: $1.70

JST PH 4 to breadboard adapter.

JST PH 4 to breadboard adapter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PyCubed Mainboard-v02

author: maholli
Top
Bottom

4 layer board of 3.56 x 3.78 inches (90.3 x 96.0 mm)
Uploaded: August 12, 2019
Shared: August 12, 2019
Total Price: $134.40

Open-source, radiation tested CubeSat programmable entirely in Python. See pycubed.org for details.

Open-source, radiation tested CubeSat programmable entirely in Python. See pycubed.org for details.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pico-pixie-v1.12

author: ke6mt
Top
Bottom

2 layer board of 1.01 x 0.81 inches (25.6 x 20.5 mm)
Uploaded: August 12, 2019
Shared: August 12, 2019
Total Price: $4.05

v1.12 of the pico pixie! Now even smaller!

v1.12 of the pico pixie! Now even smaller!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Updated ion trap breakboard

author: acalvin
Top
Bottom

2 layer board of 5.01 x 2.51 inches (127.2 x 63.7 mm)
Uploaded: August 09, 2019
Shared: August 12, 2019
Total Price: $62.80

The silkscreen is removed to reduce the effect of charging from ablation loading. SMB footprint made larger.

The silkscreen is removed to reduce the effect of charging from ablation loading. SMB footprint made larger.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BP flash adapter

author: nsayer
Top
Bottom

2 layer board of 0.80 x 0.90 inches (20.4 x 22.9 mm)
Uploaded: August 11, 2019
Shared: August 12, 2019
Total Price: $3.60

This little board will adapt a Bus Pirate v4 for programming SPI flash chips. The 6 pin pinout is the same as the AVR ISP pinout, with !CS substituted for !RESET. If you add that connector to your board to facilitate flash programming in situ, then all you have to do is do whatever is necessary t…

Show full description

This little board will adapt a Bus Pirate v4 for programming SPI flash chips. The 6 pin pinout is the same as the AVR ISP pinout, with !CS substituted for !RESET. If you add that connector to your board to facilitate flash programming in situ, then all you have to do is do whatever is necessary t…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MIDI DIN-5 F-to MIDI DIN-5 F

author: johnpark
Top
Bottom

2 layer board of 0.87 x 1.50 inches (22.2 x 38.1 mm)
Uploaded: August 12, 2019
Shared: August 12, 2019
Total Price: $6.50

Female to Female MIDI connector with power and status LEDs

Female to Female MIDI connector with power and status LEDs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Echomatic

author: vintagevalves
Top
Bottom

2 layer board of 2.33 x 1.74 inches (59.3 x 44.3 mm)
Uploaded: August 12, 2019
Shared: August 12, 2019
Total Price: $20.30

Echomatic - A guitar pedal which allows an analog tape player to be inserted into the signal path and used as a delay processor. Based on the design of Nicholas Boscorelli.

Echomatic - A guitar pedal which allows an analog tape player to be inserted into the signal path and used as a delay processor. Based on the design of Nicholas Boscorelli.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy