Shared Projects

Shared Projects

PS2 Plus Custom Design

author: ComputerMan
Top
Bottom

2 layer board of 1.15 x 1.10 inches (29.3 x 28.0 mm)
Uploaded: March 21, 2020
Shared: March 21, 2020
Total Price: $6.30

This is a custom made version of the ps2 plus created by the amazing BitBuilt team; I wanted a few extra things in a smaller PCB so that the cost won’t be too significant. The original PCB costed almost 3 times more because of its larger size.

This one costs less and adds an extra Flexible Fla…

Show full description

This is a custom made version of the ps2 plus created by the amazing BitBuilt team; I wanted a few extra things in a smaller PCB so that the cost won’t be too significant. The original PCB costed almost 3 times more because of its larger size.

This one costs less and adds an extra Flexible Fla…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

odrive encoder

author: tlalexander
Top
Bottom

2 layer board of 1.45 x 1.31 inches (36.9 x 33.2 mm)
Uploaded: September 18, 2019
Shared: March 21, 2020
Total Price: $9.50

odrive encoder

odrive encoder

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Triple Pressure Sensor Interface V1.1

author: Kevin-Knowles
Top
Bottom

2 layer board of 2.90 x 1.40 inches (73.7 x 35.6 mm)
Uploaded: March 21, 2020
Shared: March 21, 2020
Total Price: $20.30

A board for interfacing with three AG30 series pressure sensors. Designed for mechanical engineering senior design team 59. This revision was made to reflect the correct pinout of the AG30 sensors and the old version has been taken down to prevent ordering mistakes.

A board for interfacing with three AG30 series pressure sensors. Designed for mechanical engineering senior design team 59. This revision was made to reflect the correct pinout of the AG30 sensors and the old version has been taken down to prevent ordering mistakes.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Single Pressure Sensor Interface V1.1

author: Kevin-Knowles
Top
Bottom

2 layer board of 1.83 x 1.83 inches (46.4 x 46.4 mm)
Uploaded: March 20, 2020
Shared: March 21, 2020
Total Price: $16.65

A board for interfacing with AG30 series pressure sensors. Designed for mechanical engineering senior design team 59. This revision was made to reflect the correct pinout of the AG30 sensors and the old version has been taken down to prevent ordering mistakes.

A board for interfacing with AG30 series pressure sensors. Designed for mechanical engineering senior design team 59. This revision was made to reflect the correct pinout of the AG30 sensors and the old version has been taken down to prevent ordering mistakes.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PLAGAL-4

author: antongale
Top
Bottom

2 layer board of 0.81 x 1.50 inches (20.6 x 38.0 mm)
Uploaded: March 20, 2020
Shared: March 20, 2020
Total Price: $6.05

Re-implementation of the CBM PLA 906114-04 Replacement Board Original Author: Marc B

Re-implementation of the CBM PLA 906114-04 Replacement Board Original Author: Marc B

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CARR_DATA2_LEDSTATUS_2

author: CARR_DATA2
Top
Bottom

2 layer board of 0.94 x 1.10 inches (23.9 x 28.0 mm)
Uploaded: March 20, 2020
Shared: March 20, 2020
Total Price: $5.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NjordOx_Rev2.zip

author: jboneng
Top
Bottom

2 layer board of 2.43 x 2.13 inches (61.8 x 54.1 mm)
Uploaded: April 29, 2017
Shared: March 20, 2020
Total Price: $25.90

NjordOx Rev2

NjordOx Rev2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MAX31850 Breakout - A1

author: GIE-Design
Top
Bottom

2 layer board of 0.84 x 0.41 inches (21.4 x 10.3 mm)
Uploaded: March 20, 2020
Shared: March 20, 2020
Total Price: $1.70

Maxim MAX31850 Thermocouple to digital one-wire interface breakout board

Maxim MAX31850 Thermocouple to digital one-wire interface breakout board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

i2cif

author: Oto
Top
Bottom

2 layer board of 1.45 x 1.23 inches (36.9 x 31.1 mm)
Uploaded: March 19, 2020
Shared: March 19, 2020
Total Price: $8.85

LPT to I2C/SMBUS adapter. Fits LPT connector.

LPT to I2C/SMBUS adapter. Fits LPT connector.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PositionHeadx3

author: JRD-Austin
Top
Bottom

2 layer board of 3.71 x 1.31 inches (94.2 x 33.2 mm)
Uploaded: March 10, 2020
Shared: March 19, 2020
Total Price: $24.20

O scale Pennsy position head board for WS2812-2020 leds.

If building a 7 position head, omit D8 and D9, and jumper the pads on the middle right. If building an 8 position (B&O) style head with no middle indicator, omit D2 and jumper the pads in the middle above center.

BOM consists of 7,8 …

Show full description

O scale Pennsy position head board for WS2812-2020 leds.

If building a 7 position head, omit D8 and D9, and jumper the pads on the middle right. If building an 8 position (B&O) style head with no middle indicator, omit D2 and jumper the pads in the middle above center.

BOM consists of 7,8 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Aaron's 15V to Eurorack PSU

author: insom
Top
Bottom

2 layer board of 2.50 x 1.75 inches (63.6 x 44.5 mm)
Uploaded: March 19, 2020
Shared: March 19, 2020
Total Price: $21.90

15V positive tip barrel to +12V, -12V and +5V on a 2x6 connector. Leave out the 7805 and 2 pins to use with 10 pin equipment, or overhang the connector to use with 16 pin equipment.

15V positive tip barrel to +12V, -12V and +5V on a 2x6 connector. Leave out the 7805 and 2 pins to use with 10 pin equipment, or overhang the connector to use with 16 pin equipment.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Lpt to I2C/SMBUS Interface

author: Oto
Top
Bottom

2 layer board of 2.19 x 2.50 inches (55.6 x 63.5 mm)
Uploaded: March 18, 2020
Shared: March 19, 2020
Total Price: $27.35

A general purpose I2C interface tool that allows to communicate with any I2C/SMBUS devices

A general purpose I2C interface tool that allows to communicate with any I2C/SMBUS devices

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED_2x2 Darkened

author: Tom
Top
Bottom

2 layer board of 0.65 x 1.35 inches (16.6 x 34.3 mm)
Uploaded: March 18, 2020
Shared: March 19, 2020
Total Price: $4.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS485- ESD Protection

author: Ritwik
Top
Bottom

2 layer board of 1.30 x 0.59 inches (33.0 x 14.9 mm)
Uploaded: March 18, 2020
Shared: March 18, 2020
Total Price: $3.80

RS485- ESD Protection for Vex V5

(CDSOT23-SM712) TVS Diode

(A-2004-3-4-LP-N-R) RJ 9 4P4C

RS485- ESD Protection for Vex V5

(CDSOT23-SM712) TVS Diode

(A-2004-3-4-LP-N-R) RJ 9 4P4C

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP-8266- DS18B20 on Battery

author: YannickF
Top
Bottom

2 layer board of 2.10 x 0.89 inches (53.3 x 22.6 mm)
Uploaded: March 18, 2020
Shared: March 18, 2020
Total Price: $9.30

Just need to solder a wire from RST to Wakeup pin on ESP8266 chip (not really easy)

Just need to solder a wire from RST to Wakeup pin on ESP8266 chip (not really easy)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flip Pixel Shield

author: pkujawa
Top
Bottom

2 layer board of 1.96 x 2.08 inches (49.9 x 52.7 mm)
Uploaded: May 18, 2016
Shared: March 18, 2020
Total Price: $20.35

Flip Pixel Shield

Flip Pixel Shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PearlGecko_EDT.kicad_pcb

Top
Bottom

2 layer board of 1.00 x 0.70 inches (25.4 x 17.8 mm)
Uploaded: February 14, 2020
Shared: March 18, 2020
Total Price: $3.50

Adapter for EDT project to connect to debug port of Pearl Gecko Starter Kit

Adapter for EDT project to connect to debug port of Pearl Gecko Starter Kit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PicoPower! Rev0

author: TinLethax
Top
Bottom

2 layer board of 1.70 x 0.40 inches (43.2 x 10.2 mm)
Uploaded: March 18, 2020
Shared: March 18, 2020
Total Price: $3.40

PicoPower! Simple but yet powerful. This is the first prototype of PicoPower! board. Combine with SDCC and my STM8L template. everything is so powerful and light-weigh. For more info : https://github.com/TiNredmc/PicoPowerBoard

PicoPower! Simple but yet powerful. This is the first prototype of PicoPower! board. Combine with SDCC and my STM8L template. everything is so powerful and light-weigh. For more info : https://github.com/TiNredmc/PicoPowerBoard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TMC2660_BRD_v63

author: sealj553
Top
Bottom

2 layer board of 1.58 x 0.79 inches (40.0 x 20.0 mm)
Uploaded: March 18, 2020
Shared: March 18, 2020
Total Price: $6.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

silver-smoker.kicad_pcb

author: jtzemp
Top
Bottom

2 layer board of 2.37 x 1.62 inches (60.1 x 41.1 mm)
Uploaded: December 21, 2016
Shared: March 18, 2020
Total Price: $19.15

Silver Smoker control board for DIY smoker

Silver Smoker control board for DIY smoker

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy