0603 Bodge Strip
2 layer board of 1.17 x 0.25 inches (29.7 x 6.4 mm)
Uploaded:
February 5th 2023
Shared:
February 5th 2023
Total Price:
$1.45
Small flex PCB that you can cut up as needed for circuit bodging with 0603 components.
Small flex PCB that you can cut up as needed for circuit bodging with 0603 components.
ATtiny85 Project Board v2
2 layer board of 0.60 x 0.34 inches (15.3 x 8.5 mm)
Uploaded:
January 16th 2021
Shared:
January 16th 2021
Total Price:
$1.00
Designed to be a flex PCB. Cut off the bottom pads if you only need two I/O. Supports ATtiny85 SOIC package. Only other part is a 0.1 uF 0603 cap.
Only difference from v1 is improved silkscreen markings.
Designed to be a flex PCB. Cut off the bottom pads if you only need two I/O. Supports ATtiny85 SOIC package. Only other part is a 0.1 uF 0603 cap.
Only difference from v1 is improved silkscreen markings.
CircleBoy v0.3 - convert a 3ds circle pad to button presses (For GBC & GBA)
2 layer board of 0.65 x 0.40 inches (16.6 x 10.2 mm)
Uploaded:
June 24th 2020
Shared:
December 13th 2020
Total Price:
$1.30
Lets you replace the dpad in your GBC or GBA with a 3DS circle pad! You can also solder different joysticks directly if you're not using a circle pad.
Board files and firmware here - https://github.com/orangeglo/CircleBoy
Lets you replace the dpad in your GBC or GBA with a 3DS circle pad! You can also solder different joysticks directly if you're not using a circle pad.
Board files and firmware here - https://github.com/orangeglo/CircleBoy
VitaStickForPSP3000
2 layer board of 0.27 x 0.40 inches (6.9 x 10.1 mm)
Uploaded:
June 16th 2020
Shared:
June 28th 2020
Total Price:
$0.50
This little board will let you plug a Vita 2000 joystick into a PSP 3000, replacing the existing PSP joystick.
Files and BOM available here
This little board will let you plug a Vita 2000 joystick into a PSP 3000, replacing the existing PSP joystick.
Files and BOM available here
PSP 2000 Consolizer AKA PS2PSP
2 layer board of 2.06 x 1.48 inches (52.2 x 37.5 mm)
Uploaded:
June 20th 2020
Shared:
June 20th 2020
Total Price:
$15.15
Simple board to adapt a ps2 controller to a psp2000 ribbon signals. Board has tx/rx swapped by mistake, and also needs a 10k pullup resistor on the ps2 data line.
Simple board to adapt a ps2 controller to a psp2000 ribbon signals. Board has tx/rx swapped by mistake, and also needs a 10k pullup resistor on the ps2 data line.
