VGA_PANEL_BREAKOUT
author: arithmaldor
2 layer board of 0.59 x 0.81 inches (15.1 x 20.6 mm)
Uploaded:
June 28, 2020
Shared:
June 28, 2020
Total Price:
$2.40
Source:https://github.com/arithmaldor/VGA-Panel-Breakout/releases/tag/1.0
VGA_PANEL_BREAKOUT Quick solder adapter for VGA port.
Inspired by a lost design by citrus3000psi. Snap the board in half, solder the VGA connector on (all but the bottom row), making sure the pads at the bottom face out. Push the other half of the PCB into the slot (some filing may be required) and solder the pins to the pads. Solder the pads together at 90 degree angles on the bottom. Attach wires from screw post(s) to pins labeled GND is desired.
Part: 10090929-S154VLF
Licensed under CERN-OHL-S v2.
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-S v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.
Source:https://github.com/arithmaldor/VGA-Panel-Breakout/releases/tag/1.0
VGA_PANEL_BREAKOUT Quick solder adapter for VGA port.
Inspired by a lost design by citrus3000psi. Snap the board in half, solder the VGA connector on (all but the bottom row), making sure the pads at the bottom face out. Push the other half of the PCB into the slot (some filing may be required) and solder the pins to the pads. Solder the pads together at 90 degree angles on the bottom. Attach wires from screw post(s) to pins labeled GND is desired.
Part: 10090929-S154VLF
Licensed under CERN-OHL-S v2.
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-S v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.
