Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

scsi-floppy

author: jclang
Top
Bottom

2 layer board of 5.01 x 3.01 inches (127.2 x 76.4 mm)
Uploaded: March 27, 2018
Shared: April 23, 2020
Total Price: $75.20

This is ver. 2 of my SCSI to floppy disk interface. It implements SASI/SCSI-1 interface. I support 720k disks (512byte/9 sectors/2 side/80 tracks) But other formats could be supported.

Code and schematic is at https://www.github.com/joelang/scsi-floppy

This is ver. 2 of my SCSI to floppy disk interface. It implements SASI/SCSI-1 interface. I support 720k disks (512byte/9 sectors/2 side/80 tracks) But other formats could be supported.

Code and schematic is at https://www.github.com/joelang/scsi-floppy

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pdp-panel.kicad_pcb

author: jclang
Top
Bottom

2 layer board of 2.61 x 2.43 inches (66.2 x 61.6 mm)
Uploaded: February 20, 2019
Shared: April 23, 2020
Total Price: $31.60

Switch panel for PDP/lSI-11 QBUS backplane. includes power switch and sequencing, halt/run with indicator and LTC.

Switch panel for PDP/lSI-11 QBUS backplane. includes power switch and sequencing, halt/run with indicator and LTC.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LOGIC-PROBE

author: agroza
Top
Bottom

2 layer board of 3.05 x 0.50 inches (77.5 x 12.7 mm)
Uploaded: April 22, 2020
Shared: April 22, 2020
Total Price: $7.60

A simple logic probe based on a schematic I found on the Internet.

A simple logic probe based on a schematic I found on the Internet.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Universal Multi-Out_v2

author: ManCloud
Top
Bottom

2 layer board of 0.74 x 0.36 inches (18.7 x 9.2 mm)
Uploaded: April 22, 2020
Shared: April 22, 2020
Total Price: $1.30

Universal Multi-Out PCB for Nintendo SNES, N64 (RGB-Modded) and other Nintendo Consoles with Multi-Out Connector.

Link to Circuit-Board VSAB Thread

Universal Multi-Out PCB for Nintendo SNES, N64 (RGB-Modded) and other Nintendo Consoles with Multi-Out Connector.

Link to Circuit-Board VSAB Thread

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VSAB_N64ADV/SNES_v2

author: ManCloud
Top
Bottom

2 layer board of 1.56 x 0.90 inches (39.6 x 22.8 mm)
Uploaded: April 22, 2020
Shared: April 22, 2020
Total Price: $7.00

Vertical Scart Adapter Board for SNES / N64 with RGB Bypass / AMP

Link to Circuit-Board

Vertical Scart Adapter Board for SNES / N64 with RGB Bypass / AMP

Link to Circuit-Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

6652_IPSS_MOSFETs.kicad_pcb

author: kevin-vermeer
Top
Bottom

2 layer board of 0.71 x 1.46 inches (18.0 x 37.1 mm)
Uploaded: April 22, 2020
Shared: April 22, 2020
Total Price: $5.15

6652 Prototyping

6652 Prototyping

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

6652_IPSS_Programmer.kicad_pcb

author: kevin-vermeer
Top
Bottom

2 layer board of 1.76 x 1.76 inches (44.7 x 44.7 mm)
Uploaded: April 22, 2020
Shared: April 22, 2020
Total Price: $15.50

6652_IPSS_Programmer 2020 04 21 Rev A

6652_IPSS_Programmer 2020 04 21 Rev A

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

M100/T102 ROM Test Board V2.0

author: Stardust
Top
Bottom

2 layer board of 2.17 x 4.04 inches (55.1 x 102.6 mm)
Uploaded: April 18, 2020
Shared: April 22, 2020
Total Price: $43.85

This is the larger ROM test board. The parts list is from Digi-Key but any source could be used for the parts.

Digi-Key parts list

There are two ROM test board options the only difference is the form factor. [ROM Test PCB option 1](https://oshp…

Show full description

This is the larger ROM test board. The parts list is from Digi-Key but any source could be used for the parts.

Digi-Key parts list

There are two ROM test board options the only difference is the form factor. [ROM Test PCB option 1](https://oshp…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

M100/T102 Connection test board

author: Stardust
Top
Bottom

2 layer board of 4.34 x 2.41 inches (110.2 x 61.1 mm)
Uploaded: April 18, 2020
Shared: April 22, 2020
Total Price: $52.15

Radio Shack M100/T102 connection test board. Used in conjunction with ROM test board.

The parts list is from Digi-key but the parts are generic and can be sourced anywhere the list is provided for guidance.
Digi Key parts list

  • U1,U7: SN74HC57…

Show full description

Radio Shack M100/T102 connection test board. Used in conjunction with ROM test board.

The parts list is from Digi-key but the parts are generic and can be sourced anywhere the list is provided for guidance.
Digi Key parts list

  • U1,U7: SN74HC57…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

M100/T102 ROM Test Board V1.1

author: Stardust
Top
Bottom

2 layer board of 2.92 x 1.97 inches (74.1 x 50.1 mm)
Uploaded: April 18, 2020
Shared: April 22, 2020
Total Price: $28.80

This is the smaller ROM test board. The parts list is from Digi-Key but any source could be used for the parts.

Digi-Key parts list

There are two ROM test board options the only difference is the form factor. ROM Test PCB option 1 (this board) is s…

Show full description

This is the smaller ROM test board. The parts list is from Digi-Key but any source could be used for the parts.

Digi-Key parts list

There are two ROM test board options the only difference is the form factor. ROM Test PCB option 1 (this board) is s…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CCR connection board v5a

author: apitkin
Top
Bottom

2 layer board of 1.00 x 0.84 inches (25.4 x 21.3 mm)
Uploaded: April 22, 2020
Shared: April 22, 2020
Total Price: $4.15

v5a has isolation resistors on right side only

v5a has isolation resistors on right side only

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

6652_IPSS_Lower_043022.kicad_pcb

author: kevin-vermeer
Top
Bottom

2 layer board of 1.76 x 1.76 inches (44.7 x 44.7 mm)
Uploaded: April 21, 2020
Shared: April 21, 2020
Total Price: $15.50

6652_IPSS_Lower_043022 2020 04 21 Rev A

6652_IPSS_Lower_043022 2020 04 21 Rev A

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

6652_IPSS_Upper_043016.kicad_pcb

author: kevin-vermeer
Top
Bottom

2 layer board of 1.76 x 1.76 inches (44.7 x 44.7 mm)
Uploaded: April 21, 2020
Shared: April 21, 2020
Total Price: $15.50

6652_IPSS_Upper_043016 2020 04 21 Rev A

6652_IPSS_Upper_043016 2020 04 21 Rev A

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

JLink -> EDT adapter

Top
Bottom

2 layer board of 0.95 x 0.50 inches (24.2 x 12.8 mm)
Uploaded: April 13, 2020
Shared: April 21, 2020
Total Price: $2.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ECU_Tester_Fixed.kicad_pcb

author: Speedbug78
Top
Bottom

2 layer board of 2.64 x 2.06 inches (67.1 x 52.4 mm)
Uploaded: April 21, 2020
Shared: April 21, 2020
Total Price: $27.20

Fixed controls rather than generic connectors

Fixed controls rather than generic connectors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

uBlox Sara R410 Cat M1 Featherwing V1 by Circuit Dojo

author: jaredwolff
Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.8 x 22.9 mm)
Uploaded: April 10, 2020
Shared: April 21, 2020
Total Price: $9.00

Designed by Jared Wolff AKA Circuit Dojo

Designed by Jared Wolff AKA Circuit Dojo

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TOF Lidar array + Teensy 3.2 v2

author: zlite
Top
Bottom

2 layer board of 3.37 x 2.66 inches (85.6 x 67.5 mm)
Uploaded: April 21, 2020
Shared: April 21, 2020
Total Price: $44.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mainboard_V3

author: KWZACK_APL
Top
Bottom

4 layer board of 9.51 x 6.01 inches (241.6 x 152.7 mm)
Uploaded: April 21, 2020
Shared: April 21, 2020
Total Price: $571.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Onion_Feather v0.0.1

author: whatnick
Top
Bottom

4 layer board of 2.35 x 2.10 inches (59.7 x 53.4 mm)
Uploaded: April 21, 2020
Shared: April 21, 2020
Total Price: $49.40

Initial revision of Onion to Feather Adapter. https://github.com/whatnick/Onion_Feather

Initial revision of Onion to Feather Adapter. https://github.com/whatnick/Onion_Feather

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SilentStepStick-TMC2208_v12

author: mwr666
Top
Bottom

4 layer board of 0.60 x 0.80 inches (15.3 x 20.4 mm)
Uploaded: August 01, 2018
Shared: April 21, 2020
Total Price: $4.80

Original open-source project: https://github.com/watterott/SilentStepStick

Original open-source project: https://github.com/watterott/SilentStepStick

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy