Please see https://github.com/makhowastaken/iG-LiPo-Battery-Gauge for more info. Goes nicely with https://oshpark.com/shared_projects/lczB1jHZ

Slightly tweaked version of the LED board from https://github.com/insidegadgets/LiPo-Battery-Gauge to fit with OSHpark’s minimum size requirements. Please see https://github.com/makhowastaken/iG-LiPo-Battery-Gauge for more info. Goes nicely with https://oshpark.com/shared_projects/5IOiieSn

Uses https://lcsc.com/product-detail/USB-Type-C_Korean-Hroparts-Elec-TYPE-C-31-M-12_C165948.html

Recommended be ordered at 0.8mm but thicker should also work.

Main project here: https://github.com/makhowastaken/USB_C_Breakout

Uses https://www.arrow.com/en/products/e8124-010-01/pulse-electronics-corporation

Must be ordered at 0.8mm and may need to be filed to adjust fit of the port within the cutout.

Main project here: https://github.com/makhowastaken/USB_C_Breakout

For use with https://www.aliexpress.com/item/32968867573.html in place of the original volume slider in a GBA SP. Functionally, this is the same but I’m unsure of where to get replacement sliders so I made this instead. It does work but getting everything to fit smoothly has been a challenge. You may need to file the inside of the shell down a bit. See my video for more info: https://youtu.be/m-berIt6i1I

Order in 0.8mm, not 1.6mm. Flex might also be a good option as this part needs to be THIN.