Shared Projects

Shared Projects

Coil Tester V1

author: dewhisna
Top
Bottom

2 layer board of 1.46 x 1.51 inches (37.1 x 38.4 mm)
Uploaded: March 30, 2020
Shared: March 30, 2020
Total Price: $11.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RetroTINK VGA to SCART

author: retrotink2
Top
Bottom

2 layer board of 2.01 x 3.01 inches (51.0 x 76.5 mm)
Uploaded: March 29, 2020
Shared: March 29, 2020
Total Price: $30.25

Converts RGB+HV over DB-15 to RGB + CSYNC (75 ohm) over SCART. Powered via VGA Pin 9.

Project is free and open source. No support or warranty is expressed or implied. We are not responsible for any damage from its use.

Converts RGB+HV over DB-15 to RGB + CSYNC (75 ohm) over SCART. Powered via VGA Pin 9.

Project is free and open source. No support or warranty is expressed or implied. We are not responsible for any damage from its use.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gateway HP3561 PCB

author: jeremydaily
Top
Bottom

2 layer board of 2.24 x 3.27 inches (56.9 x 82.9 mm)
Uploaded: December 02, 2019
Shared: March 29, 2020
Total Price: $36.55

A Teensy 4.0 project with 2 CAN transceivers to make a J1939 Gateway.

A Teensy 4.0 project with 2 CAN transceivers to make a J1939 Gateway.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Balanced Transistors

author: KD5VMF
Top
Bottom

2 layer board of 2.31 x 2.51 inches (58.6 x 63.7 mm)
Uploaded: March 29, 2020
Shared: March 29, 2020
Total Price: $28.90

Q1, Q2 (X2 - 2n6284g) R1 (1.5 Ohm) R2(.5 Ohm) R3(10 Ohm) R4(10 Ohm) D1(1N5407-G) C1(100n)

Q1, Q2 (X2 - 2n6284g) R1 (1.5 Ohm) R2(.5 Ohm) R3(10 Ohm) R4(10 Ohm) D1(1N5407-G) C1(100n)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIP42 - SOP 44 Adapter SDD-1 (Repair)

author: The_Real_Phoenix
Top
Bottom

2 layer board of 3.26 x 1.23 inches (82.9 x 31.3 mm)
Uploaded: March 05, 2019
Shared: March 29, 2020
Total Price: $20.10

Order in 0.8mm!!

Order in 0.8mm!!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SmallMotorDriver.kicad_pcb

author: yuyis
Top
Bottom

2 layer board of 1.40 x 3.60 inches (35.6 x 91.5 mm)
Uploaded: March 29, 2020
Shared: March 29, 2020
Total Price: $25.25

Unipolar Motor Driver

Unipolar Motor Driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PureDebug_fab

author: PureEngineering
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.5 x 25.5 mm)
Uploaded: March 23, 2020
Shared: March 29, 2020
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ad_pwr v0.1

author: emeb
Top
Bottom

2 layer board of 1.01 x 1.15 inches (25.6 x 29.1 mm)
Uploaded: November 19, 2017
Shared: March 28, 2020
Total Price: $5.75

Power Conditioning for AD modules

Power Conditioning for AD modules

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Heath WM5 Power Supply

author: stokessd
Top
Bottom

2 layer board of 6.01 x 4.01 inches (152.6 x 101.8 mm)
Uploaded: March 28, 2020
Shared: March 28, 2020
Total Price: $120.30

A power supply board for the Heathkit W5-M tube amplifier. This replaces the electrolytic capacitors in the power supply.

A power supply board for the Heathkit W5-M tube amplifier. This replaces the electrolytic capacitors in the power supply.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LCR-T7 SMD adapter

author: Cthulhu
Top
Bottom

2 layer board of 1.19 x 0.60 inches (30.2 x 15.2 mm)
Uploaded: March 27, 2020
Shared: March 28, 2020
Total Price: $3.50

Adapter for LCR-T7

Adapter for LCR-T7

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

APC-CV

author: themormansound
Top
Bottom

2 layer board of 1.94 x 1.15 inches (49.2 x 29.2 mm)
Uploaded: December 21, 2014
Shared: March 28, 2020
Total Price: $11.10

an APC with CV inputs - Max noize!

an APC with CV inputs - Max noize!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dragonfly07-rail revB

author: mza
Top
Bottom

4 layer board of 3.86 x 1.11 inches (98.2 x 28.1 mm)
Uploaded: March 06, 2020
Shared: March 28, 2020
Total Price: $42.80

fanout board for distributing power on positronic dragonfly04 connectors

fanout board for distributing power on positronic dragonfly04 connectors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OpenTendo Mainboard

author: Xepherys
Top
Bottom

2 layer board of 7.73 x 4.68 inches (196.3 x 118.8 mm)
Uploaded: March 28, 2020
Shared: March 28, 2020
Total Price: $180.70

OpenTendo project's NES mainboard

OpenTendo project's NES mainboard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRV8873 Test Board

author: stocker-electronics
Top
Bottom

2 layer board of 1.16 x 1.08 inches (29.4 x 27.5 mm)
Uploaded: March 13, 2020
Shared: March 28, 2020
Total Price: $6.20

DRV8873 Test Board

DRV8873 Test Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BB ATMega328-PB-MU Breakout

author: Xepherys
Top
Bottom

2 layer board of 0.46 x 1.15 inches (11.7 x 29.2 mm)
Uploaded: March 27, 2020
Shared: March 27, 2020
Total Price: $2.60

ATMega328-PB-MU power breakout for breadboard.

Digital ground and power ground are connected at the GND_IN pin.

Both sets of I2C pins are made available to the breadboard.

TX/RX are made available for programming.

PD2, PD3, PB4, and PB5 are also made available.

3V3 and 5V from the …

Show full description

ATMega328-PB-MU power breakout for breadboard.

Digital ground and power ground are connected at the GND_IN pin.

Both sets of I2C pins are made available to the breadboard.

TX/RX are made available for programming.

PD2, PD3, PB4, and PB5 are also made available.

3V3 and 5V from the …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino Pro Mini Prototyping Shield

author: Daiku
Top
Bottom

2 layer board of 0.84 x 1.28 inches (21.3 x 32.5 mm)
Uploaded: March 27, 2020
Shared: March 27, 2020
Total Price: $5.35

Has multiple VCC and GND connections, as well as a linked hole for almost all the other pins on the Arduino Pro Mini board. Silk screen labels each of those pins, and highlights the traces to show what's connected to what. A few other pairs of holes are also provided for miscellaneous connections.

Has multiple VCC and GND connections, as well as a linked hole for almost all the other pins on the Arduino Pro Mini board. Silk screen labels each of those pins, and highlights the traces to show what's connected to what. A few other pairs of holes are also provided for miscellaneous connections.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BB - USB-C power breakout

author: Xepherys
Top
Bottom

2 layer board of 0.63 x 0.37 inches (16.0 x 9.3 mm)
Uploaded: March 27, 2020
Shared: March 27, 2020
Total Price: $1.15

USB-C power breakout for breadboard. This board provides +/- to power rails only. Shielding is grounded at this connection.

MIT License Copyright © 2020 West Winds Creative / Jesse Williams

USB-C power breakout for breadboard. This board provides +/- to power rails only. Shielding is grounded at this connection.

MIT License Copyright © 2020 West Winds Creative / Jesse Williams

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC Harness PCB v0_6

author: Xepherys
Top
Bottom

2 layer board of 1.70 x 2.33 inches (43.2 x 59.1 mm)
Uploaded: July 02, 2019
Shared: March 27, 2020
Total Price: $19.75

The 0.4 design with slightly smaller footprint. Hopefully less RF noise from steppers to signal.

The 0.4 design with slightly smaller footprint. Hopefully less RF noise from steppers to signal.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Omega2 I2C, Serial and SPI

author: hallard
Top
Bottom

2 layer board of 0.61 x 1.54 inches (15.5 x 39.1 mm)
Uploaded: February 21, 2020
Shared: March 27, 2020
Total Price: $4.70

Just basic board for Omega 2 to provide Serial1 as FTDI connector, I2C, SPI and a LED

Just basic board for Omega 2 to provide Serial1 as FTDI connector, I2C, SPI and a LED

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

T84-DIP_XT

author: matte.pcb
Top
Bottom

2 layer board of 1.40 x 0.81 inches (35.6 x 20.6 mm)
Uploaded: March 26, 2020
Shared: March 26, 2020
Total Price: $5.65

ATtinyX4 board with xtal, isp, reset and 5V regulator.

ATtinyX4 board with xtal, isp, reset and 5V regulator.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy