Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

MCP4728-Breakout

author: jspark311
Top
Bottom

2 layer board of 0.55 x 0.65 inches (13.9 x 16.4 mm)
Uploaded: December 10, 2019
Shared: July 16, 2021
Total Price: $1.75

The MCP4728 is an I2C quad channel 12-bit DAC with non-volatile storage, and a synchronous load pin for cases where channels need to be changed concurrently. This part is useful for applications where an analog trim value needs to be stored and loaded without firmware intervention.

———–…

Show full description

The MCP4728 is an I2C quad channel 12-bit DAC with non-volatile storage, and a synchronous load pin for cases where channels need to be changed concurrently. This part is useful for applications where an analog trim value needs to be stored and loaded without firmware intervention.

———–…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

XtalFilter1

author: W7PUA
Top
Bottom

2 layer board of 4.33 x 0.75 inches (110.0 x 19.0 mm)
Uploaded: June 13, 2021
Shared: July 15, 2021
Total Price: $16.20

10-pole ladder xtal filter

10-pole ladder xtal filter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

XtalTest

author: W7PUA
Top
Bottom

2 layer board of 0.61 x 0.88 inches (15.5 x 22.4 mm)
Uploaded: June 13, 2021
Shared: July 15, 2021
Total Price: $2.65

Test Board for SMD 2.5 x 3.2 mm crystal, pins 1,3. W7PUA

Test Board for SMD 2.5 x 3.2 mm crystal, pins 1,3. W7PUA

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CurrentSourceProto

author: PTSmithIUBphysicsElectronicsShop
Top
Bottom

2 layer board of 2.00 x 2.00 inches (50.8 x 50.8 mm)
Uploaded: July 15, 2021
Shared: July 15, 2021
Total Price: $20.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SPDT diode switch

author: Jubal81
Top
Bottom

2 layer board of 0.75 x 0.74 inches (19.0 x 18.8 mm)
Uploaded: July 15, 2021
Shared: July 15, 2021
Total Price: $2.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CANJunction

author: james
Top
Bottom

2 layer board of 1.82 x 0.89 inches (46.3 x 22.6 mm)
Uploaded: July 15, 2021
Shared: July 15, 2021
Total Price: $8.10

a PCB to easily connect CAN devices for the FIRST robotics competition

a PCB to easily connect CAN devices for the FIRST robotics competition

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

iSaab

author: mcaldwelva
Top
Bottom

2 layer board of 2.30 x 2.56 inches (58.5 x 65.1 mm)
Uploaded: July 14, 2021
Shared: July 14, 2021
Total Price: $29.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Game Boy DMG Headphone Board

author: Helder
Top
Bottom

2 layer board of 1.50 x 0.64 inches (38.1 x 16.2 mm)
Uploaded: July 14, 2021
Shared: July 14, 2021
Total Price: $4.75

Untested DMG headphone board by Rolf. I simple added some milling slots and redid the tracing so it's compliant with be manufacturable.

Untested DMG headphone board by Rolf. I simple added some milling slots and redid the tracing so it's compliant with be manufacturable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Thermocouple Board [TESTING]

author: Grayson.Bellamy
Top
Bottom

4 layer board of 2.59 x 1.42 inches (65.8 x 36.0 mm)
Uploaded: July 13, 2021
Shared: July 13, 2021
Total Price: $36.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mppcSensor-uniplast - OSHPark.kicad_pcb

author: sawaiz
Top
Bottom

2 layer board of 0.54 x 0.26 inches (13.8 x 6.5 mm)
Uploaded: October 23, 2019
Shared: July 12, 2021
Total Price: $0.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MTH QRE1113 Tach Sensor Board

author: gunrunnerjohn
Top
Bottom

2 layer board of 0.28 x 1.38 inches (7.0 x 35.0 mm)
Uploaded: June 27, 2021
Shared: July 12, 2021
Total Price: $1.90

This is a replacement tach sensor board for MTH Protosound 2 and Locosound locomotives using the QRE1113 reflective sensor. The stock MTH tach sensor board uses the Omron EE-SY124 Reflective Sensor that is no longer produced and is in short supply. This board with the QRE1113 reflective sensor …

Show full description

This is a replacement tach sensor board for MTH Protosound 2 and Locosound locomotives using the QRE1113 reflective sensor. The stock MTH tach sensor board uses the Omron EE-SY124 Reflective Sensor that is no longer produced and is in short supply. This board with the QRE1113 reflective sensor …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy4_HiFiBerry_r1_1_TopMount

author: Sanworks
Top
Bottom

2 layer board of 2.56 x 2.23 inches (65.0 x 56.5 mm)
Uploaded: July 11, 2021
Shared: July 11, 2021
Total Price: $28.45

Circuit board to interface Teensy 4.X with HiFiBerry DAC2 Pro or HD

Circuit board to interface Teensy 4.X with HiFiBerry DAC2 Pro or HD

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy4_HiFiBerry_r1_1_BottomMount

author: Sanworks
Top
Bottom

2 layer board of 2.56 x 2.23 inches (65.0 x 56.5 mm)
Uploaded: July 11, 2021
Shared: July 11, 2021
Total Price: $28.45

Circuit board to interface Teensy 4.X with HiFiBerry DAC2 Pro or HD

Circuit board to interface Teensy 4.X with HiFiBerry DAC2 Pro or HD

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

JTAG Adapter v0.1

author: apertus
Top
Bottom

2 layer board of 0.56 x 0.64 inches (14.2 x 16.1 mm)
Uploaded: July 02, 2019
Shared: July 11, 2021
Total Price: $1.75

JTAG Adapter v0.1

JTAG Adapter v0.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Haunting Mids

author: Soggybag
Top
Bottom

2 layer board of 1.79 x 1.65 inches (45.5 x 42.0 mm)
Uploaded: January 07, 2021
Shared: July 10, 2021
Total Price: $14.75

Distortion fuzz box based on Big Muff. Read more a check out the build Docs here.

Distortion fuzz box based on Big Muff. Read more a check out the build Docs here.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VL53L5.v01c

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.41 inches (17.9 x 10.3 mm)
Uploaded: July 10, 2021
Shared: July 10, 2021
Total Price: $2.80

Corrected pin map.

Corrected pin map.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

smaller_8mm_carrier_with_pads

author: EllaL
Top
Bottom

2 layer board of 0.32 x 0.30 inches (8.1 x 7.5 mm)
Uploaded: October 26, 2020
Shared: July 09, 2021
Total Price: $0.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NPN/PNP Opto for Inductive Sensors

author: Deadeye0815
Top
Bottom

2 layer board of 0.76 x 0.55 inches (19.3 x 14.0 mm)
Uploaded: May 17, 2020
Shared: July 09, 2021
Total Price: $2.05

This is my ALL IN ONE Optokoppler to connect your Inductive (or Capacitiv) Sensor to your RPi, Arduino, 3D Printer or else . You can contact me over Discord "Deadeye0815" if you have questions !

This is my ALL IN ONE Optokoppler to connect your Inductive (or Capacitiv) Sensor to your RPi, Arduino, 3D Printer or else . You can contact me over Discord "Deadeye0815" if you have questions !

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

G-7000 AV Mod

author: Deadeye0815
Top
Bottom

2 layer board of 0.75 x 0.81 inches (19.0 x 20.6 mm)
Uploaded: July 07, 2020
Shared: July 09, 2021
Total Price: $3.00

AV Out Mod for the G-7000 Game Console , with Audio !! Circuit Design is based on the Blog Artikel from gamesx.com https://gamesx.com/wiki/doku.php?id=av:g7000_av

AV Out Mod for the G-7000 Game Console , with Audio !! Circuit Design is based on the Blog Artikel from gamesx.com https://gamesx.com/wiki/doku.php?id=av:g7000_av

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

60V Bafang Light MosFET Module

author: Deadeye0815
Top
Bottom

2 layer board of 0.88 x 0.63 inches (22.4 x 16.1 mm)
Uploaded: July 09, 2021
Shared: July 09, 2021
Total Price: $2.75

This is a simple but Opto Isolate Power MosFET Module Conect your 6V Light Output from your Bafang (BBS02 o.e) and Battery (45-60V) to switch ON/Off a E Scooter or Cutom Light

This is a simple but Opto Isolate Power MosFET Module Conect your 6V Light Output from your Bafang (BBS02 o.e) and Battery (45-60V) to switch ON/Off a E Scooter or Cutom Light

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy