Shared Projects

Shared Projects

USB C-to-C Flex PCB Mod (Add 5.1k Pull-down Resistors)

author: ide
Top
Bottom

2 layer board of 0.32 x 0.35 inches (8.0 x 9.0 mm)
Uploaded: May 16, 2021
Shared: May 19, 2021
Total Price: $0.55

A flex PCB to retrofit a USB-C connector with 5.1k pull-down resistors to enable C-to-C power. Designed for 16+8 dummy pin USB-C connectors with 12 leads. Open sourced here: https://github.com/ide/usb-c-to-c-power-mod.

Be sure to select the "Flex" option at checkout.

A flex PCB to retrofit a USB-C connector with 5.1k pull-down resistors to enable C-to-C power. Designed for 16+8 dummy pin USB-C connectors with 12 leads. Open sourced here: https://github.com/ide/usb-c-to-c-power-mod.

Be sure to select the "Flex" option at checkout.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NESRGB Front-Loader Expansion Audio

author: Voultar
Top
Bottom

2 layer board of 0.78 x 0.26 inches (19.7 x 6.6 mm)
Uploaded: May 19, 2021
Shared: May 19, 2021
Total Price: $1.00

This small interface is designed to allow easy acquisition of expansion audio from either real Famicom cartridges or a Flash-Drive that has expansion audio capabilities via cartridge pin 54. Installation picture including component map can be found in ZIP.

NON-COMMERCIAL USE! I don’t care if …

Show full description

This small interface is designed to allow easy acquisition of expansion audio from either real Famicom cartridges or a Flash-Drive that has expansion audio capabilities via cartridge pin 54. Installation picture including component map can be found in ZIP.

NON-COMMERCIAL USE! I don’t care if …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NESRGB Top-Loader Expansion Audio Board

author: Voultar
Top
Bottom

2 layer board of 0.46 x 0.30 inches (11.7 x 7.7 mm)
Uploaded: May 19, 2021
Shared: May 19, 2021
Total Price: $0.65

This small interface is designed to allow easy acquisition of expansion audio from either a real Famicom cartridge or a Flash-Drive that has expansion audio capabilities via cartridge pin 51.

INSTALLATION PICTURE: https://pbs.twimg.com/media/EaGrmEnWoAEec82?format=jpg&name=large

NOTE: The …

Show full description

This small interface is designed to allow easy acquisition of expansion audio from either a real Famicom cartridge or a Flash-Drive that has expansion audio capabilities via cartridge pin 51.

INSTALLATION PICTURE: https://pbs.twimg.com/media/EaGrmEnWoAEec82?format=jpg&name=large

NOTE: The …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FED3_RGBaddon2 v1

author: alexxai
Top
Bottom

2 layer board of 2.85 x 1.11 inches (72.3 x 28.1 mm)
Uploaded: May 05, 2021
Shared: May 19, 2021
Total Price: $15.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266_MQTT_light

author: wymand
Top
Bottom

2 layer board of 2.75 x 2.75 inches (69.9 x 69.9 mm)
Uploaded: May 19, 2021
Shared: May 19, 2021
Total Price: $37.80

An ESP8266 board for MQTT control of a White and an RGB light. Code schematic and board are at:

An ESP8266 board for MQTT control of a White and an RGB light. Code schematic and board are at:

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

final

author: KlaengurThoroddssen
Top
Bottom

2 layer board of 2.46 x 2.10 inches (62.5 x 53.4 mm)
Uploaded: March 30, 2020
Shared: May 19, 2021
Total Price: $25.85

lm386 radio module, REV 1A has an error with I/O ports.

lm386 radio module, REV 1A has an error with I/O ports.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

E10312-001

author: Android_Innovations
Top
Bottom

2 layer board of 2.23 x 2.27 inches (56.7 x 57.8 mm)
Uploaded: May 18, 2021
Shared: May 18, 2021
Total Price: $25.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tail Cap Switch 20mm

author: Quadrupel
Top
Bottom

2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded: May 18, 2021
Shared: May 18, 2021
Total Price: $3.10

N1- NFet; PH2520U or similar;

D1- Schottky diode; 323;

C1- Capacitor x2 6,3V 100uF; 1206;

R1- Resistor 5M; 0805;

N1- NFet; PH2520U or similar;

D1- Schottky diode; 323;

C1- Capacitor x2 6,3V 100uF; 1206;

R1- Resistor 5M; 0805;

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mass-balance-hardware.kicad_pcb

author: trb0023
Top
Bottom

4 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded: May 18, 2021
Shared: May 18, 2021
Total Price: $56.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mai-adapter-board.kicad_pcb

author: trb0023
Top
Bottom

2 layer board of 1.34 x 1.34 inches (34.1 x 34.1 mm)
Uploaded: May 18, 2021
Shared: May 18, 2021
Total Price: $8.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mass-balance-hardware.kicad_pcb

author: trb0023
Top
Bottom

4 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded: May 18, 2021
Shared: May 18, 2021
Total Price: $56.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BiPolar Power

author: CATinCOG
Top
Bottom

2 layer board of 3.99 x 1.28 inches (101.3 x 32.4 mm)
Uploaded: November 02, 2018
Shared: May 18, 2021
Total Price: $25.40

AC to DC Bi Polar Power Supply w 2 x eurorack box headers and 1 x Molex KK series header. Diodes are 1N4001. Does not require center tap transformer, can be AC wall wart. Based on MFOS bi polar power supply design

AC to DC Bi Polar Power Supply w 2 x eurorack box headers and 1 x Molex KK series header. Diodes are 1N4001. Does not require center tap transformer, can be AC wall wart. Based on MFOS bi polar power supply design

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NES-101 Expansion Audio QSB

author: FragolRoc
Top
Bottom

2 layer board of 0.54 x 0.30 inches (13.6 x 7.6 mm)
Uploaded: May 17, 2021
Shared: May 17, 2021
Total Price: $0.80

An expansion audio QSB designed for the top loading NES (NES-101). This is meant to be soldered in place and then connected to the NESRGB by Tim Worthington. Installation notes and gerber files can be found at: https://github.com/FragolRoc/NES-Expansion-Audio

An expansion audio QSB designed for the top loading NES (NES-101). This is meant to be soldered in place and then connected to the NESRGB by Tim Worthington. Installation notes and gerber files can be found at: https://github.com/FragolRoc/NES-Expansion-Audio

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy 4.1 USB Host Hat v0.5

author: AntiCat
Top
Bottom

2 layer board of 2.41 x 0.71 inches (61.2 x 18.1 mm)
Uploaded: May 16, 2021
Shared: May 16, 2021
Total Price: $8.55

A USB Host Hat including a case that can be used instead of the USB Host Cable. Digikey has a USB-Plug that fits good enough: [AE11182-ND](https://www.digikey.ch/de/products/detail/assmann-w…

Show full description

A USB Host Hat including a case that can be used instead of the USB Host Cable. Digikey has a USB-Plug that fits good enough: [AE11182-ND](https://www.digikey.ch/de/products/detail/assmann-w…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pot-gang.kicad_pcb

author: embodied.space
Top
Bottom

2 layer board of 0.59 x 5.06 inches (15.1 x 128.6 mm)
Uploaded: April 07, 2021
Shared: May 15, 2021
Total Price: $15.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jack-gang.kicad_pcb

author: embodied.space
Top
Bottom

2 layer board of 0.40 x 5.06 inches (10.1 x 128.6 mm)
Uploaded: April 07, 2021
Shared: May 15, 2021
Total Price: $10.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

butt-gang.kicad_pcb

author: embodied.space
Top
Bottom

2 layer board of 0.79 x 5.06 inches (20.1 x 128.6 mm)
Uploaded: April 08, 2021
Shared: May 15, 2021
Total Price: $19.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PJ301BM Breakout Board

author: zzzzzzzz
Top
Bottom

2 layer board of 0.90 x 0.55 inches (22.9 x 14.0 mm)
Uploaded: May 15, 2021
Shared: May 15, 2021
Total Price: $2.45

PJ301BM Breakout Board

Breadboard-friendly breakout for the PJ301BM mono audio jack. Breaks out the tip, tip-normal, and sleeve contacts to each side of the board. Castellated holes are just for fun - I just wanted to try them out - I wouldn't recommend trying to place this board on top of…

Show full description

PJ301BM Breakout Board

Breadboard-friendly breakout for the PJ301BM mono audio jack. Breaks out the tip, tip-normal, and sleeve contacts to each side of the board. Castellated holes are just for fun - I just wanted to try them out - I wouldn't recommend trying to place this board on top of…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USBHubtest

author: ArsenioDev
Top
Bottom

2 layer board of 1.72 x 1.72 inches (43.6 x 43.7 mm)
Uploaded: May 14, 2021
Shared: May 14, 2021
Total Price: $14.75

Hub test for validation.

Hub test for validation.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VoronV01HeadCableBreakout-solderv2

author: TMugge
Top
Bottom

2 layer board of 2.01 x 1.37 inches (51.0 x 34.9 mm)
Uploaded: May 13, 2021
Shared: May 13, 2021
Total Price: $13.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy