Gerber_PCB_Vacuum Pump Controller
author: kaydeevee
2 layer board of 2.17 x 2.17 inches (55.1 x 55.1 mm)
Uploaded:
June 01, 2021
Shared:
June 01, 2021
Total Price:
$23.50
This is a controller for a vacuum pump, useful in pick-and-place machines. The controller adjusts the rpm of a vacuum pump to maintain a constant vacuum. The controller can be used over usb, as part of a pick-and-place machine, or standalone, with a footswitch. BOM, documentation and Arduino sket…
Show full description
This is a controller for a vacuum pump, useful in pick-and-place machines. The controller adjusts the rpm of a vacuum pump to maintain a constant vacuum. The controller can be used over usb, as part of a pick-and-place machine, or standalone, with a footswitch. BOM, documentation and Arduino sket…
Show full description
USB Type-C Power with Centered Mount
author: ide
2 layer board of 0.43 x 0.27 inches (11.0 x 6.9 mm)
Uploaded:
November 10, 2020
Shared:
May 31, 2021
Total Price:
$0.55
Top board of a GBA SP USB-C mod. Order in 0.8mm thickness.
Bottom board here: https://oshpark.com/shared_projects/Fu0z0WjL
Requires two 5.1k 0402 resistors and a USB-C connector (6 + 18 dummy pins). 3D-printable spacer here: https://github.com/nMinhBang/GBA-SP_USB-C/blob/master/GBAUSBC.stl
Top board of a GBA SP USB-C mod. Order in 0.8mm thickness.
Bottom board here: https://oshpark.com/shared_projects/Fu0z0WjL
Requires two 5.1k 0402 resistors and a USB-C connector (6 + 18 dummy pins). 3D-printable spacer here: https://github.com/nMinhBang/GBA-SP_USB-C/blob/master/GBAUSBC.stl
USB Type-C Centered Mount Support Board
author: ide
2 layer board of 0.43 x 0.27 inches (11.0 x 6.9 mm)
Uploaded:
November 10, 2020
Shared:
May 31, 2021
Total Price:
$0.55
Bottom board of a GBA SP USB-C mod. Order with 1.6mm (default) thickness.
Top board here: https://oshpark.com/shared_projects/sET5JmVX
Bottom board of a GBA SP USB-C mod. Order with 1.6mm (default) thickness.
Top board here: https://oshpark.com/shared_projects/sET5JmVX
MEE2732
author: Brian_K_White
2 layer board of 0.66 x 1.30 inches (16.7 x 33.0 mm)
Uploaded:
May 30, 2021
Shared:
May 30, 2021
Total Price:
$4.25
github.com/bkw777/Teeprom
Adapter PCB to use a 28C64 EEPROM in a 24-pin Molex 78805 socket with a 2732 pinout. Example: The RB5X Robot
github.com/bkw777/Teeprom
Adapter PCB to use a 28C64 EEPROM in a 24-pin Molex 78805 socket with a 2732 pinout. Example: The RB5X Robot
Gerber_nRF24L01 Shield
author: Rasyoung
2 layer board of 2.71 x 2.11 inches (68.9 x 53.6 mm)
Uploaded:
May 30, 2021
Shared:
May 30, 2021
Total Price:
$28.60
Forcetronic design imported into EasyEDA, exported as gerber for Oshpark https://github.com/ForceTronics/nRF24L01-Shield
Forcetronic design imported into EasyEDA, exported as gerber for Oshpark https://github.com/ForceTronics/nRF24L01-Shield
PRBSYNTH1 (PCB NOISECM1)
author: RS-ELC
2 layer board of 3.83 x 0.83 inches (97.4 x 21.2 mm)
Uploaded:
June 29, 2020
Shared:
May 30, 2021
Total Price:
$15.95
Noise effects music synthesizer named PRBSYNTH1 intended for generating, shaping and modulating noise related sounds. Many of the classic synthesizersounds can be created, but the unit also also goes into other sonic directions. All sounds are made by tweaking 8 powerfull functions coupled to po…
Show full description
Noise effects music synthesizer named PRBSYNTH1 intended for generating, shaping and modulating noise related sounds. Many of the classic synthesizersounds can be created, but the unit also also goes into other sonic directions. All sounds are made by tweaking 8 powerfull functions coupled to po…
Show full description
laser-driver revQ
author: mza
2 layer board of 0.86 x 0.26 inches (21.9 x 6.6 mm)
Uploaded:
May 29, 2021
Shared:
May 29, 2021
Total Price:
$1.10
drives laser diode with 50 Ohm mmcx signal. Fits in a thorlabs SR9A cable assembly.
use 0.8mm thickness.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revQ.schematic.pdf>
drives laser diode with 50 Ohm mmcx signal. Fits in a thorlabs SR9A cable assembly.
use 0.8mm thickness.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revQ.schematic.pdf>
DAC dual 6bit R2R revA
author: mza
4 layer board of 1.00 x 1.58 inches (25.3 x 40.1 mm)
Uploaded:
May 28, 2021
Shared:
May 28, 2021
Total Price:
$15.70
Using “bonded lanes” of oserdes/iserdes channels of a spartan6, this is an attempt to get a pair of 6 bit DACs (both at 1 GSa/s). Fits on left or right half of the pins on an althea revBL.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/DAC-dual-6bit-R2R.revA.schematic.pdf>
Using “bonded lanes” of oserdes/iserdes channels of a spartan6, this is an attempt to get a pair of 6 bit DACs (both at 1 GSa/s). Fits on left or right half of the pins on an althea revBL.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/DAC-dual-6bit-R2R.revA.schematic.pdf>
fpv-diversity
author: jharwinbarrozo
2 layer board of 2.22 x 3.67 inches (56.3 x 93.3 mm)
Uploaded:
May 18, 2021
Shared:
May 27, 2021
Total Price:
$40.65
https://github.com/jharwinbarrozo/3-ch-diversity-system
https://github.com/jharwinbarrozo/3-ch-diversity-system
Gerber_PCB_THS7374 buffer for CPLD_2021-05-27(1)
author: the_crayon_king
2 layer board of 1.22 x 1.04 inches (31.0 x 26.4 mm)
Uploaded:
May 27, 2021
Shared:
May 27, 2021
Total Price:
$6.35
This is to interface with a mod kit I have. If you want to use SEGA cables or just have a LPF then this is your best bet.
Set the pad named "LPF" to turn on a low pass filter (may do something idk).
If you are doing the SEGA cable thing then solder down the three jumpers you see by the ou…
Show full description
This is to interface with a mod kit I have. If you want to use SEGA cables or just have a LPF then this is your best bet.
Set the pad named "LPF" to turn on a low pass filter (may do something idk).
If you are doing the SEGA cable thing then solder down the three jumpers you see by the ou…
Show full description
monticello revA
author: mza
4 layer board of 2.56 x 1.58 inches (65.1 x 40.1 mm)
Uploaded:
May 27, 2021
Shared:
May 27, 2021
Total Price:
$40.40
althea toupee for connecting to an XRM/TOP boardstack to provide clock/trigger and other communications. Also has a spot for 1 LVDS oscillator and 5 lemo/sma connectors.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/monticello.revA.schematic.pdf>
althea toupee for connecting to an XRM/TOP boardstack to provide clock/trigger and other communications. Also has a spot for 1 LVDS oscillator and 5 lemo/sma connectors.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/monticello.revA.schematic.pdf>
5V_Dist_Board_V1
author: wadspau2
2 layer board of 2.26 x 3.51 inches (57.4 x 89.2 mm)
Uploaded:
May 24, 2021
Shared:
May 27, 2021
Total Price:
$39.65
ROC Lab 5V Distribution Board using Pololu 2851 regulator boards
ROC Lab 5V Distribution Board using Pololu 2851 regulator boards
