Shared Projects

Shared Projects

12V RGD LED Strip Driver

author: CANHacks
Top
Bottom

2 layer board of 1.29 x 1.85 inches (32.8 x 47.0 mm)
Uploaded: January 09, 2021
Shared: June 04, 2021
Total Price: $11.90

12V RGD LED Strip Driver, connects to ESP12F board for control

12V RGD LED Strip Driver, connects to ESP12F board for control

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Voltage_Current_Source_Dominick.kicad_pcb

author: Dominick_Campbell
Top
Bottom

2 layer board of 4.72 x 2.26 inches (120.0 x 57.5 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $53.45

Voltage to current source version 2

Voltage to current source version 2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2BitUpCounter (Rev2)

author: bitbytebit
Top
Bottom

2 layer board of 1.95 x 1.05 inches (49.6 x 26.8 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $10.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS232Wing v1

author: tannewt
Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.8 x 22.9 mm)
Uploaded: December 12, 2019
Shared: June 04, 2021
Total Price: $9.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

endcap

author: ericmartin1600
Top
Bottom

2 layer board of 2.50 x 2.00 inches (63.5 x 50.8 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $25.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Trackuino Shield v2.3

author: weh
Top
Bottom

2 layer board of 2.65 x 2.10 inches (67.4 x 53.4 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $27.85

https://github.com/trackuino/shield/

https://github.com/trackuino/shield/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueRetro_PS1_Shield_v1.2

author: mi213
Top
Bottom

2 layer board of 1.52 x 1.50 inches (38.6 x 38.1 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $11.40

This is a shield for the ESP32 d1 mini, designed for the BlueRetro project. The aim of the board is to simply build a small single player Bluetooth receiver for the PS1 / 2. Modern BT controllers (Switch, PS3, PS4, PS5, Xbox One …) can be used on the original PS1/2 without cables.

BlueRetro…

Show full description

This is a shield for the ESP32 d1 mini, designed for the BlueRetro project. The aim of the board is to simply build a small single player Bluetooth receiver for the PS1 / 2. Modern BT controllers (Switch, PS3, PS4, PS5, Xbox One …) can be used on the original PS1/2 without cables.

BlueRetro…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

isa-backplane

author: agroza
Top
Bottom

2 layer board of 6.89 x 8.56 inches (175.0 x 217.5 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $294.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Seven Segment LED Matrix Breakout Bord

author: gmbarrera
Top
Bottom

2 layer board of 1.60 x 1.26 inches (40.6 x 32.1 mm)
Uploaded: June 04, 2021
Shared: June 04, 2021
Total Price: $10.10

Simple breakout board to connect seven-segment LED matrix to Arduino.

Simple breakout board to connect seven-segment LED matrix to Arduino.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EnchantV2

author: FireSourcery
Top
Bottom

2 layer board of 1.55 x 0.60 inches (39.4 x 15.3 mm)
Uploaded: March 07, 2018
Shared: June 03, 2021
Total Price: $4.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VCO

author: Egobien
Top
Bottom

2 layer board of 4.27 x 1.96 inches (108.4 x 49.7 mm)
Uploaded: June 02, 2021
Shared: June 02, 2021
Total Price: $41.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pot revA

author: mza
Top
Bottom

2 layer board of 1.02 x 1.10 inches (26.0 x 28.0 mm)
Uploaded: June 01, 2021
Shared: June 01, 2021
Total Price: $5.60

puts a 1k pot between -/+5V on a 3 pin mini-fit jr connector and presents the voltage to a sma/lemo connector.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/pot.revA.schematic.pdf>

puts a 1k pot between -/+5V on a 3 pin mini-fit jr connector and presents the voltage to a sma/lemo connector.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/pot.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HC49_test_fixture

author: N5BIA
Top
Bottom

2 layer board of 1.30 x 2.30 inches (33.0 x 58.4 mm)
Uploaded: June 01, 2021
Shared: June 01, 2021
Total Price: $14.90

Crystal test fixture. Further documentation on http://www.n5bia.net/n5bia/index.php/products/iec-444-test-fixture

Crystal test fixture. Further documentation on http://www.n5bia.net/n5bia/index.php/products/iec-444-test-fixture

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dormio V3

author: tomasero
Top
Bottom

2 layer board of 1.69 x 1.56 inches (42.9 x 39.6 mm)
Uploaded: June 01, 2021
Shared: June 01, 2021
Total Price: $13.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RedBoard-Qwiic

author: bhuang7
Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.4 mm)
Uploaded: June 01, 2021
Shared: June 01, 2021
Total Price: $28.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_PCB_Vacuum Pump Controller

author: kaydeevee
Top
Bottom

2 layer board of 2.17 x 2.17 inches (55.1 x 55.1 mm)
Uploaded: June 01, 2021
Shared: June 01, 2021
Total Price: $23.50

This is a controller for a vacuum pump, useful in pick-and-place machines. The controller adjusts the rpm of a vacuum pump to maintain a constant vacuum. The controller can be used over usb, as part of a pick-and-place machine, or standalone, with a footswitch. BOM, documentation and Arduino sket…

Show full description

This is a controller for a vacuum pump, useful in pick-and-place machines. The controller adjusts the rpm of a vacuum pump to maintain a constant vacuum. The controller can be used over usb, as part of a pick-and-place machine, or standalone, with a footswitch. BOM, documentation and Arduino sket…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB Type-C Power with Centered Mount

author: ide
Top
Bottom

2 layer board of 0.43 x 0.27 inches (11.0 x 6.9 mm)
Uploaded: November 10, 2020
Shared: May 31, 2021
Total Price: $0.55

Top board of a GBA SP USB-C mod. Order in 0.8mm thickness.

Bottom board here: https://oshpark.com/shared_projects/Fu0z0WjL

Requires two 5.1k 0402 resistors and a USB-C connector (6 + 18 dummy pins). 3D-printable spacer here: https://github.com/nMinhBang/GBA-SP_USB-C/blob/master/GBAUSBC.stl

Top board of a GBA SP USB-C mod. Order in 0.8mm thickness.

Bottom board here: https://oshpark.com/shared_projects/Fu0z0WjL

Requires two 5.1k 0402 resistors and a USB-C connector (6 + 18 dummy pins). 3D-printable spacer here: https://github.com/nMinhBang/GBA-SP_USB-C/blob/master/GBAUSBC.stl

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB Type-C Centered Mount Support Board

author: ide
Top
Bottom

2 layer board of 0.43 x 0.27 inches (11.0 x 6.9 mm)
Uploaded: November 10, 2020
Shared: May 31, 2021
Total Price: $0.55

Bottom board of a GBA SP USB-C mod. Order with 1.6mm (default) thickness.

Top board here: https://oshpark.com/shared_projects/sET5JmVX

Bottom board of a GBA SP USB-C mod. Order with 1.6mm (default) thickness.

Top board here: https://oshpark.com/shared_projects/sET5JmVX

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MEE2732

author: Brian_K_White
Top
Bottom

2 layer board of 0.66 x 1.30 inches (16.7 x 33.0 mm)
Uploaded: May 30, 2021
Shared: May 30, 2021
Total Price: $4.25

github.com/bkw777/Teeprom

Adapter PCB to use a 28C64 EEPROM in a 24-pin Molex 78805 socket with a 2732 pinout. Example: The RB5X Robot

github.com/bkw777/Teeprom

Adapter PCB to use a 28C64 EEPROM in a 24-pin Molex 78805 socket with a 2732 pinout. Example: The RB5X Robot

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_nRF24L01 Shield

author: Rasyoung
Top
Bottom

2 layer board of 2.71 x 2.11 inches (68.9 x 53.6 mm)
Uploaded: May 30, 2021
Shared: May 30, 2021
Total Price: $28.60

Forcetronic design imported into EasyEDA, exported as gerber for Oshpark https://github.com/ForceTronics/nRF24L01-Shield

Forcetronic design imported into EasyEDA, exported as gerber for Oshpark https://github.com/ForceTronics/nRF24L01-Shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy