Genesis M1 Breakout 0402 Edition

author: MobiusStripTech
Top
Bottom

2 layer board of 0.51 x 0.28 inches (12.9 x 7.0 mm)
Uploaded: May 15, 2021
Shared: November 08, 2021
Total Price: $0.70

This uses 3x 0402 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.

This uses 3x 0402 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy