Shared Projects

Shared Projects

eMMC Connector backing board

author: dls
Top
Bottom

2 layer board of 0.45 x 0.51 inches (11.5 x 13.0 mm)
Uploaded: September 20, 2021
Shared: November 09, 2021
Total Price: $1.15

For use with Flex extender

For use with Flex extender

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Genesis M1 Breakout 0603 Edition

author: MobiusStripTech
Top
Bottom

2 layer board of 0.45 x 0.28 inches (11.4 x 7.0 mm)
Uploaded: January 07, 2021
Shared: November 08, 2021
Total Price: $0.60

This uses 3x 0603 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.

This uses 3x 0603 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Genesis M1 miniDIN Mount

author: MobiusStripTech
Top
Bottom

2 layer board of 1.50 x 1.26 inches (38.1 x 32.0 mm)
Uploaded: February 01, 2021
Shared: November 08, 2021
Total Price: $9.45

For use when installing a 9pin miniDIN in place of the RF modulator for RGB mods. Works great with the triple bypass mod. Order in 0.8mm for perfect fitment.

For use when installing a 9pin miniDIN in place of the RF modulator for RGB mods. Works great with the triple bypass mod. Order in 0.8mm for perfect fitment.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Genesis M1 Breakout 0402 Edition

author: MobiusStripTech
Top
Bottom

2 layer board of 0.51 x 0.28 inches (12.9 x 7.0 mm)
Uploaded: May 15, 2021
Shared: November 08, 2021
Total Price: $0.70

This uses 3x 0402 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.

This uses 3x 0402 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ControlBoard

author: ana3177
Top
Bottom

2 layer board of 2.76 x 2.47 inches (70.0 x 62.7 mm)
Uploaded: November 08, 2021
Shared: November 08, 2021
Total Price: $34.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fl3xWatchOLED PCB rev4.0

author: TinLethax
Top
Bottom

2 layer board of 1.47 x 0.68 inches (37.4 x 17.2 mm)
Uploaded: November 08, 2021
Shared: November 08, 2021
Total Price: $4.95

Notice

connector is on another side due to the design of connector only accept the FPC copper contact facing downward the connector. Doing this will maintain the display facing you.

Notice

connector is on another side due to the design of connector only accept the FPC copper contact facing downward the connector. Doing this will maintain the display facing you.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED-FLASHER

author: jfann
Top
Bottom

2 layer board of 1.60 x 1.06 inches (40.6 x 26.9 mm)
Uploaded: November 08, 2021
Shared: November 08, 2021
Total Price: $8.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BME Senior Design Team 1 2021 Acoustic Levitator

author: davidgodovich
Top
Bottom

4 layer board of 2.42 x 4.49 inches (61.6 x 114.2 mm)
Uploaded: November 08, 2021
Shared: November 08, 2021
Total Price: $108.90

Binghamton University BME Senior Design Team 1 Project: Acoustic Levitation

Binghamton University BME Senior Design Team 1 Project: Acoustic Levitation

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5V to 3.3V Board v0.0.1

author: KetZoomer
Top
Bottom

2 layer board of 2.05 x 2.25 inches (52.1 x 57.2 mm)
Uploaded: November 07, 2021
Shared: November 07, 2021
Total Price: $23.05

This is a board that converts a 5V signal to a 3.3V signal readable by the Raspberry Pi.

This is a board that converts a 5V signal to a 3.3V signal readable by the Raspberry Pi.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ArduBadBoyattinyledWSONFLASH finalproduction

author: dunk8888
Top
Bottom

2 layer board of 2.31 x 3.10 inches (58.8 x 78.8 mm)
Uploaded: October 26, 2021
Shared: November 07, 2021
Total Price: $35.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

flickerstrip mk3 final.brd

author: dunk8888
Top
Bottom

2 layer board of 1.94 x 0.89 inches (49.2 x 22.7 mm)
Uploaded: October 03, 2017
Shared: November 07, 2021
Total Price: $8.60

Led controller controlled via android app,go to flickerstrip.com

Led controller controlled via android app,go to flickerstrip.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TrailerV1-5

author: RVProject
Top
Bottom

2 layer board of 4.08 x 1.10 inches (103.7 x 27.9 mm)
Uploaded: October 18, 2021
Shared: November 07, 2021
Total Price: $22.45

Mill Slots Layer 46

Mill Slots Layer 46

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGBHV2SCART Passive

author: herzmx
Top
Bottom

2 layer board of 1.68 x 0.86 inches (42.7 x 22.0 mm)
Uploaded: November 06, 2021
Shared: November 06, 2021
Total Price: $7.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGBHV2SCART Active

author: herzmx
Top
Bottom

2 layer board of 1.68 x 0.86 inches (42.7 x 22.0 mm)
Uploaded: November 06, 2021
Shared: November 06, 2021
Total Price: $7.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PowerProf D1 Mini r2

author: ayan4m1
Top
Bottom

2 layer board of 1.01 x 1.11 inches (25.6 x 28.3 mm)
Uploaded: November 05, 2021
Shared: November 05, 2021
Total Price: $5.60

See https://github.com/powerprof/hardware for a full README.

See https://github.com/powerprof/hardware for a full README.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

batteryMonitorV4b-4

author: RVProject
Top
Bottom

2 layer board of 2.15 x 1.20 inches (54.7 x 30.6 mm)
Uploaded: November 04, 2021
Shared: November 04, 2021
Total Price: $12.95

See www.rv-project.com/projects/batterymonitorv2.php for all details

See www.rv-project.com/projects/batterymonitorv2.php for all details

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HELIXHVTrip

author: PTSmithIUBphysicsElectronicsShop
Top
Bottom

4 layer board of 3.00 x 2.70 inches (76.2 x 68.6 mm)
Uploaded: November 04, 2021
Shared: November 04, 2021
Total Price: $81.00

Overcurrent trip, buffering, & protection for HELIX DCT HV supplies.

Overcurrent trip, buffering, & protection for HELIX DCT HV supplies.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiniStepper V3.1

author: JorgeP
Top
Bottom

2 layer board of 0.55 x 0.68 inches (14.0 x 17.3 mm)
Uploaded: November 04, 2021
Shared: November 04, 2021
Total Price: $1.85

A breakout board for a mini linear stepper motor with a 4 pad connector on 0.8mm centers. The board has holes for mounting the frame using solder.

All sizing is guessed, this is my 4th version, V3.1, after size testing the previous 3. The motors are available on [Amazon in qty's of 50](https…

Show full description

A breakout board for a mini linear stepper motor with a 4 pad connector on 0.8mm centers. The board has holes for mounting the frame using solder.

All sizing is guessed, this is my 4th version, V3.1, after size testing the previous 3. The motors are available on [Amazon in qty's of 50](https…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ws2811_led_controller_gerbers_v1.0

author: jpinkstone
Top
Bottom

2 layer board of 1.30 x 2.70 inches (33.1 x 68.6 mm)
Uploaded: March 12, 2021
Shared: November 03, 2021
Total Price: $17.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LC-Meter

author: K.W.
Top
Bottom

2 layer board of 1.95 x 3.15 inches (49.5 x 80.0 mm)
Uploaded: October 19, 2021
Shared: November 03, 2021
Total Price: $30.65

LC-Meter from: https://github.com/coreWeaver/LC-Meter

LC-Meter from: https://github.com/coreWeaver/LC-Meter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy