Shared Projects

Shared Projects

SDrive-Simple

author: AtariBits
Top
Bottom

2 layer board of 2.00 x 1.90 inches (50.8 x 48.3 mm)
Uploaded: November 29, 2021
Shared: November 29, 2021
Total Price: $19.00

Yet another Atari 8-Bit SD Card Disk Drive. This is a greatly simplified version based on the original Boblk & Raster design, utilizing KBR's SDrive-Max firmware. Designed to mount above the SIO Jack.

Yet another Atari 8-Bit SD Card Disk Drive. This is a greatly simplified version based on the original Boblk & Raster design, utilizing KBR's SDrive-Max firmware. Designed to mount above the SIO Jack.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WS2811 Driver - breakout

author: km5ht
Top
Bottom

2 layer board of 0.48 x 0.48 inches (12.1 x 12.1 mm)
Uploaded: November 29, 2021
Shared: November 29, 2021
Total Price: $1.10

This is a breakout board for the WS2811 chip used in Led Light shows. It is SOIC8 to DIP8 for prototyping circuits.

This is a breakout board for the WS2811 chip used in Led Light shows. It is SOIC8 to DIP8 for prototyping circuits.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

"Mr. Nosy" SNAC Sniffer ver.LONG

author: TheJeffChen
Top
Bottom

2 layer board of 2.52 x 0.71 inches (64.0 x 17.9 mm)
Uploaded: November 29, 2021
Shared: November 29, 2021
Total Price: $8.85

"Mr. Nosy" SNAC Sniffer ver.LONG

"Mr. Nosy" SNAC Sniffer ver.LONG

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

"Mr. Nosy" SNAC Sniffer ver.SQUARE

author: TheJeffChen
Top
Bottom

2 layer board of 1.71 x 1.67 inches (43.4 x 42.5 mm)
Uploaded: November 29, 2021
Shared: November 29, 2021
Total Price: $14.25

"Mr. Nosy" SNAC Sniffer ver.SQUARE

"Mr. Nosy" SNAC Sniffer ver.SQUARE

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

24h-timer-switch.kicad_pcb

author: ikatkov
Top
Bottom

2 layer board of 1.60 x 1.02 inches (40.7 x 25.9 mm)
Uploaded: November 28, 2021
Shared: November 28, 2021
Total Price: $8.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

THP Diff Probe (Nov 2021)

author: Phoenix-Designz
Top
Bottom

2 layer board of 5.00 x 2.74 inches (127.1 x 69.7 mm)
Uploaded: November 27, 2021
Shared: November 27, 2021
Total Price: $68.65

THP Differential Probe, 25MHz, 1KV

THP Differential Probe, 25MHz, 1KV

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SMT Diff Probe (Nov 2021)

author: Phoenix-Designz
Top
Bottom

2 layer board of 4.24 x 2.43 inches (107.7 x 61.8 mm)
Uploaded: November 27, 2021
Shared: November 27, 2021
Total Price: $51.60

SMT Differential Probe, 25MHz, 1KV

SMT Differential Probe, 25MHz, 1KV

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Intellivision AY-3-8900 Breakout

author: the_crayon_king
Top
Bottom

2 layer board of 0.89 x 0.74 inches (22.7 x 18.9 mm)
Uploaded: November 27, 2021
Shared: November 27, 2021
Total Price: $3.30

Used with the Intellivision to breakout the connections needed for RGB kits, installed on the bottom. Take note of the pin numbers.

Used with the Intellivision to breakout the connections needed for RGB kits, installed on the bottom. Take note of the pin numbers.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Intellivision AY-3-8915 Breakout

author: the_crayon_king
Top
Bottom

2 layer board of 0.94 x 0.66 inches (23.9 x 16.9 mm)
Uploaded: November 27, 2021
Shared: November 27, 2021
Total Price: $3.10

Used on the bottom of an Intellivision console to breakout the needed connections for RGB mods.

Used on the bottom of an Intellivision console to breakout the needed connections for RGB mods.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

soft latch power on/off

author: ikatkov
Top
Bottom

2 layer board of 0.83 x 0.38 inches (21.0 x 9.6 mm)
Uploaded: November 25, 2021
Shared: November 26, 2021
Total Price: $1.55

See https://github.com/ikatkov/soft-latch-on-off

See https://github.com/ikatkov/soft-latch-on-off

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 Doorbot v5

author: frezik
Top
Bottom

2 layer board of 1.15 x 2.04 inches (29.3 x 51.8 mm)
Uploaded: September 26, 2021
Shared: November 23, 2021
Total Price: $11.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Buffer-Board-RELIANCE.kicad_pcb

author: RCMDavid
Top
Bottom

4 layer board of 16.30 x 1.50 inches (414.0 x 38.2 mm)
Uploaded: July 13, 2021
Shared: November 23, 2021
Total Price: $245.10

HP Buffer Board

HP Buffer Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ADXL1004 PCB Rev1

author: jschepp
Top
Bottom

2 layer board of 0.55 x 0.49 inches (14.0 x 12.3 mm)
Uploaded: November 23, 2021
Shared: November 23, 2021
Total Price: $1.30

With Pin21 Connection Over Range Disable

With Pin21 Connection Over Range Disable

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AFE PZT DEV v2

author: rserranosmith
Top
Bottom

2 layer board of 1.16 x 1.01 inches (29.6 x 25.6 mm)
Uploaded: November 22, 2021
Shared: November 22, 2021
Total Price: $5.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DE0-Nano RGB2VGA bkw777 v003

author: Brian_K_White
Top
Bottom

2 layer board of 2.95 x 2.20 inches (74.8 x 55.9 mm)
Uploaded: November 22, 2021
Shared: November 22, 2021
Total Price: $32.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ST1PS03A.v01

author: PeskyProducts
Top
Bottom

2 layer board of 0.51 x 0.41 inches (12.8 x 10.3 mm)
Uploaded: November 22, 2021
Shared: November 22, 2021
Total Price: $1.00

Breakout for ST1PS03A low Iq 400 mA Buck Converter

Breakout for ST1PS03A low Iq 400 mA Buck Converter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HP3468A/B Display Interposer

author: chicken
Top
Bottom

2 layer board of 1.42 x 0.92 inches (36.1 x 23.4 mm)
Uploaded: August 31, 2021
Shared: November 22, 2021
Total Price: $6.50

Breakout board for signals going to the display of a HP3468A/B bench multimeter. I made this as a development tool with the goal to ultimately replace the rather dim original LCD display with a more readable OLED display. Link

Breakout board for signals going to the display of a HP3468A/B bench multimeter. I made this as a development tool with the goal to ultimately replace the rather dim original LCD display with a more readable OLED display. Link

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ultrasonic anemometer

author: BenFroelich
Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded: November 21, 2021
Shared: November 21, 2021
Total Price: $28.35

arduino uno r3 compatible ultrasonic anemometer. i will use https://www.st.com/en/microcontrollers-microprocessors/stm32f302r8.html https://www.mouser.com/datasheet/2/389/nucleo_f030r8-1848087.pdf with it

arduino uno r3 compatible ultrasonic anemometer. i will use https://www.st.com/en/microcontrollers-microprocessors/stm32f302r8.html https://www.mouser.com/datasheet/2/389/nucleo_f030r8-1848087.pdf with it

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Faux Twiddler Brain Board

author: Atltvhead
Top
Bottom

2 layer board of 1.20 x 2.12 inches (30.5 x 53.8 mm)
Uploaded: November 21, 2021
Shared: November 21, 2021
Total Price: $12.70

ARP2040_IO_Expander v54_2021-11-21

Using an Arduino connect rp2040 and an MCP23017E/SO IO expander to read the 16 key switches for my Faux Twiddler chorded keyboard. See the project here on hackaday https://hackaday.io/project/182590-cyberdeck-z2

ARP2040_IO_Expander v54_2021-11-21

Using an Arduino connect rp2040 and an MCP23017E/SO IO expander to read the 16 key switches for my Faux Twiddler chorded keyboard. See the project here on hackaday https://hackaday.io/project/182590-cyberdeck-z2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MJ-808 clone

author: ejovrh
Top
Bottom

4 layer board of 0.91 x 0.91 inches (23.0 x 23.0 mm)
Uploaded: November 20, 2021
Shared: November 20, 2021
Total Price: $8.20

Magicshine MJ-808 Bicycle front light

CAN capable clone

HW rev. 4c

https://github.com/ejovrh/MJ808

Magicshine MJ-808 Bicycle front light

CAN capable clone

HW rev. 4c

https://github.com/ejovrh/MJ808

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy