Shared Projects

Shared Projects

XBee Raspberry Pi Adapter

author: SteveMayze
Top
Bottom

2 layer board of 1.38 x 1.40 inches (35.1 x 35.6 mm)
Uploaded: September 03, 2021
Shared: November 19, 2021
Total Price: $9.65

Enables a XBee throuhole module to connect to a Raspberry Pi (Zero). Included is a SGM811B power management and reset control on GPIO_18

Enables a XBee throuhole module to connect to a Raspberry Pi (Zero). Included is a SGM811B power management and reset control on GPIO_18

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Combined Power Distribution Board

author: enochs.brandon
Top
Bottom

2 layer board of 0.80 x 4.00 inches (20.4 x 101.7 mm)
Uploaded: October 19, 2021
Shared: November 18, 2021
Total Price: $16.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shim Servo

author: Cal
Top
Bottom

2 layer board of 3.00 x 1.60 inches (76.2 x 40.6 mm)
Uploaded: November 18, 2021
Shared: November 18, 2021
Total Price: $24.00

+/- 2A voltage controlled current source for shim coils

+/- 2A voltage controlled current source for shim coils

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bm68rgb bluetooth mod

author: captmicro
Top
Bottom

2 layer board of 2.40 x 0.65 inches (61.0 x 16.5 mm)
Uploaded: November 17, 2021
Shared: November 17, 2021
Total Price: $7.80

Convert bm68rgb keyboard from ATMega32U4 to NRF52 using a MDBT50Q module.

ORDER AS FLEX PCB

ATMega32U4 footprint is flipped & mirrored so you can bend the flex PCB 180 degrees and solder onto the footprint on the keyboard. Couldn't find a way to automatically switch over to bat…

Show full description

Convert bm68rgb keyboard from ATMega32U4 to NRF52 using a MDBT50Q module.

ORDER AS FLEX PCB

ATMega32U4 footprint is flipped & mirrored so you can bend the flex PCB 180 degrees and solder onto the footprint on the keyboard. Couldn't find a way to automatically switch over to bat…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fan Control

author: SirEgno
Top
Bottom

2 layer board of 1.46 x 0.75 inches (37.0 x 19.0 mm)
Uploaded: November 17, 2021
Shared: November 17, 2021
Total Price: $5.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Autodrone.kicad_pcb

author: Jpwolfe
Top
Bottom

6 layer board of 2.16 x 1.54 inches (54.9 x 39.2 mm)
Uploaded: November 17, 2021
Shared: November 17, 2021
Total Price: $49.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduboy_V3

author: dunk8888
Top
Bottom

2 layer board of 1.18 x 1.77 inches (30.0 x 45.0 mm)
Uploaded: October 21, 2021
Shared: November 17, 2021
Total Price: $10.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Guitar pick, #Avnet100Years

author: alexglow
Top
Bottom

2 layer board of 1.18 x 1.41 inches (29.9 x 35.9 mm)
Uploaded: October 12, 2021
Shared: November 17, 2021
Total Price: $8.30

A functional guitar pick / earring / key fob celebrating Avnet's history with Guild Guitars. Full project page at bit.ly/avnetpick

A functional guitar pick / earring / key fob celebrating Avnet's history with Guild Guitars. Full project page at bit.ly/avnetpick

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

THz_v16

author: THz_board
Top
Bottom

2 layer board of 1.10 x 1.29 inches (28.0 x 32.8 mm)
Uploaded: November 17, 2021
Shared: November 17, 2021
Total Price: $7.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CAM Salinity Sensor Filter V1_0

author: KWZACK_APL
Top
Bottom

4 layer board of 3.50 x 2.50 inches (89.0 x 63.6 mm)
Uploaded: November 16, 2021
Shared: November 16, 2021
Total Price: $87.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raphael Joystick Rev1

author: InventionHouse
Top
Bottom

2 layer board of 3.90 x 2.80 inches (99.1 x 71.2 mm)
Uploaded: November 16, 2021
Shared: November 16, 2021
Total Price: $54.65

CNC Joystick

CNC Joystick

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shelly-FTDI

author: hallard
Top
Bottom

2 layer board of 0.89 x 0.62 inches (22.5 x 15.6 mm)
Uploaded: November 16, 2021
Shared: November 16, 2021
Total Price: $2.70

Shelly FTDI Programmer

See github project

Shelly FTDI Programmer

See github project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Condenser Mic Preamp

author: mquimby
Top
Bottom

2 layer board of 1.15 x 2.80 inches (29.3 x 71.2 mm)
Uploaded: November 16, 2021
Shared: November 16, 2021
Total Price: $16.15

This is a condenser mic preamp circuit utilizing the THAT1512 preamp chip. This circuit was developed by DIYPerks (https://www.youtube.com/channel/UCUQo7nzH1sXVpzL92VesANw) for his USB-C microphone project (https://www.youtube.com/watch?v=LoQu3XXIayc), all this board does is make the build proces…

Show full description

This is a condenser mic preamp circuit utilizing the THAT1512 preamp chip. This circuit was developed by DIYPerks (https://www.youtube.com/channel/UCUQo7nzH1sXVpzL92VesANw) for his USB-C microphone project (https://www.youtube.com/watch?v=LoQu3XXIayc), all this board does is make the build proces…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

octo-baseboard.kicad_pcb

author: Tookys
Top
Bottom

2 layer board of 3.30 x 1.75 inches (83.8 x 44.4 mm)
Uploaded: November 15, 2021
Shared: November 16, 2021
Total Price: $28.85

octobanger base board

octobanger base board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VGAxSCART

author: TheJeffChen
Top
Bottom

2 layer board of 1.62 x 0.56 inches (41.2 x 14.2 mm)
Uploaded: November 15, 2021
Shared: November 15, 2021
Total Price: $4.50

GitHub Page: https://github.com/jeffqchen/VGAxSCART

GitHub Page: https://github.com/jeffqchen/VGAxSCART

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8DIN2VGA (PCB Type) Main PCB

author: TheJeffChen
Top
Bottom

2 layer board of 1.21 x 0.69 inches (30.8 x 17.5 mm)
Uploaded: November 15, 2021
Shared: November 15, 2021
Total Price: $4.15

GitHub Page: https://github.com/jeffqchen/8DIN2VGA/blob/main/8DIN2VGA_PCB/README.md

GitHub Page: https://github.com/jeffqchen/8DIN2VGA/blob/main/8DIN2VGA_PCB/README.md

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8DIN2VGA (PCB Type) Plug PCB

author: TheJeffChen
Top
Bottom

2 layer board of 0.97 x 0.35 inches (24.6 x 9.0 mm)
Uploaded: November 15, 2021
Shared: November 15, 2021
Total Price: $1.70

GitHub Page: https://github.com/jeffqchen/8DIN2VGA/blob/main/8DIN2VGA_PCB/README.md

GitHub Page: https://github.com/jeffqchen/8DIN2VGA/blob/main/8DIN2VGA_PCB/README.md

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bypass eletronic 4066 40106

author: andregarcia57
Top
Bottom

2 layer board of 1.17 x 1.36 inches (29.7 x 34.6 mm)
Uploaded: November 15, 2021
Shared: November 15, 2021
Total Price: $7.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

domotaz- RFM69_pi_dock

author: Mastertaz
Top
Bottom

2 layer board of 0.75 x 1.00 inches (19.0 x 25.5 mm)
Uploaded: November 15, 2021
Shared: November 15, 2021
Total Price: $3.70

Dock to use a RFM69CW with a raspberrypi (pins 17 to 24)

Dock to use a RFM69CW with a raspberrypi (pins 17 to 24)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DMG Pitch Pot

author: CodyWick13
Top
Bottom

2 layer board of 0.51 x 0.49 inches (13.1 x 12.3 mm)
Uploaded: November 13, 2021
Shared: November 14, 2021
Total Price: $1.20

original idea - https://www.instructables.com/The-Ultimate-Guide-to-Creating-Chiptunes-on-the-Ga/

This board allows for control of a DMG's (original gameboy) oscillator clock with a 500k (or less) potentiometer.

You will need: - LTC1799 - 10K Resistor -100nf Capacitor - 500K Potentiome…

Show full description

original idea - https://www.instructables.com/The-Ultimate-Guide-to-Creating-Chiptunes-on-the-Ga/

This board allows for control of a DMG's (original gameboy) oscillator clock with a 500k (or less) potentiometer.

You will need: - LTC1799 - 10K Resistor -100nf Capacitor - 500K Potentiome…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy