MGB-LED-101
author: leggomyfroggo
2 layer board of 0.58 x 0.64 inches (14.8 x 16.3 mm)
Uploaded:
October 02, 2022
Shared:
December 04, 2022
Total Price:
$1.85
Dual stage battery indicator for the Game Boy Pocket. Order as flex to ensure proper fit in all shells. Optional: use 4mm long section of 3mm diameter fiber optic tubing as a light pipe.
Assemble according to BOM:
| Reference | Description | Footprint | Part # | Notes | | ——— | ———-…
Show full description
Dual stage battery indicator for the Game Boy Pocket. Order as flex to ensure proper fit in all shells. Optional: use 4mm long section of 3mm diameter fiber optic tubing as a light pipe.
Assemble according to BOM:
| Reference | Description | Footprint | Part # | Notes | | ——— | ———-…
Show full description
MGB-TAC-101
author: leggomyfroggo
2 layer board of 2.74 x 1.65 inches (69.5 x 42.0 mm)
Uploaded:
December 04, 2022
Shared:
December 04, 2022
Total Price:
$22.60
Single board tactile button mod for the Game Boy Pocket. MUST ORDER IN FLEX.
Assemble according to the BOM:
| Reference | Description | Footprint | Part # |
|---|---|---|---|
| D1 | Quad diode array, common cathode | SOT-23-5 | FMN1T148 |
| D2 | Dual diode array, co… |
Show full description
Single board tactile button mod for the Game Boy Pocket. MUST ORDER IN FLEX.
Assemble according to the BOM:
| Reference | Description | Footprint | Part # |
|---|---|---|---|
| D1 | Quad diode array, common cathode | SOT-23-5 | FMN1T148 |
| D2 | Dual diode array, co… |
Show full description
Game Boy Pocket/Color Replacement Power Board
author: mousebitelabs
2 layer board of 0.79 x 0.79 inches (20.0 x 20.1 mm)
Uploaded:
December 04, 2022
Shared:
December 04, 2022
Total Price:
$3.10
Replacement power board for CGB/MGB/MGBC. Untested! 5V only, so it does not support original LCD displays.
All discrete parts (other than L1) are size 0603. Caps should be X5R/16V or better.
C1, C3, C4 = 10uF C2, C6 (?) = 1uF C5 = 10uF (if needed)
R1 = 1k (?) R2 = 1M (for TPS61200), 0 (for TPS…
Show full description
Replacement power board for CGB/MGB/MGBC. Untested! 5V only, so it does not support original LCD displays.
All discrete parts (other than L1) are size 0603. Caps should be X5R/16V or better.
C1, C3, C4 = 10uF C2, C6 (?) = 1uF C5 = 10uF (if needed)
R1 = 1k (?) R2 = 1M (for TPS61200), 0 (for TPS…
Show full description
EiceDRIVER Half Bridge Board
author: Dog-One
2 layer board of 2.00 x 1.91 inches (50.8 x 48.6 mm)
Uploaded:
December 04, 2022
Shared:
December 04, 2022
Total Price:
$19.10
Infineon 2EDS8265HXUMA2 Half Bridge Driver Board Has two onboard MOSFETs that lay on the backside upside down so they can be easily heat sinked. Solder mask areas removed for trace tinning.
Infineon 2EDS8265HXUMA2 Half Bridge Driver Board Has two onboard MOSFETs that lay on the backside upside down so they can be easily heat sinked. Solder mask areas removed for trace tinning.
Hantek 6022 AC/DC mod
author: pzw
2 layer board of 1.35 x 0.74 inches (34.3 x 18.8 mm)
Uploaded:
December 03, 2022
Shared:
December 03, 2022
Total Price:
$4.95
The design is based on the diagram at the github repo. Instead of mounting all the components with glue at the bottom of the main PCB, this additional PCB is mounted using a mounting hole available at th…
Show full description
The design is based on the diagram at the github repo. Instead of mounting all the components with glue at the bottom of the main PCB, this additional PCB is mounted using a mounting hole available at th…
Show full description
N64 Memory Pak 256KB FRAM
author: frosters
2 layer board of 1.65 x 1.34 inches (41.9 x 33.9 mm)
Uploaded:
December 03, 2022
Shared:
December 03, 2022
Total Price:
$11.00
This is a drop in replacement FRAM based memory card for the N64. It will fit in OEM Controller Pak housings or aftermarket housings with the same footprint.
PCB Thickness: 1.2mm
This is a drop in replacement FRAM based memory card for the N64. It will fit in OEM Controller Pak housings or aftermarket housings with the same footprint.
PCB Thickness: 1.2mm
TPS63802 Test Board
author: mousebitelabs
2 layer board of 0.78 x 1.04 inches (19.9 x 26.4 mm)
Uploaded:
December 03, 2022
Shared:
December 03, 2022
Total Price:
$4.05
A simple test board for three voltage supplies, using the TPS63802 buck-boost converter. Ideally something like a 5V, 3.3V, and 2.5V supplies from one input.
A simple test board for three voltage supplies, using the TPS63802 buck-boost converter. Ideally something like a 5V, 3.3V, and 2.5V supplies from one input.
project-stemmaqt-ISM330DHCX.kicad_pcb
author: francoisgervais
4 layer board of 1.00 x 0.70 inches (25.4 x 17.8 mm)
Uploaded:
September 24, 2022
Shared:
December 03, 2022
Total Price:
$7.00
v1.0.0
v1.0.0
Twin Famicom Expansion Switcher Switch Board
author: TheJeffChen
2 layer board of 0.50 x 1.16 inches (12.6 x 29.4 mm)
Uploaded:
November 05, 2022
Shared:
December 01, 2022
Total Price:
$2.85
Twin Famicom Expansion Switcher Switch Board
Twin Famicom Expansion Switcher Switch Board
Twin Famicom Expansion Switcher Main Board
author: TheJeffChen
2 layer board of 1.74 x 0.47 inches (44.1 x 11.9 mm)
Uploaded:
November 05, 2022
Shared:
December 01, 2022
Total Price:
$4.05
Twin Famicom Expansion Switcher Main Board
Twin Famicom Expansion Switcher Main Board
placebo; rev. 0x9
author: dotcypress
2 layer board of 0.75 x 1.14 inches (19.1 x 29.1 mm)
Uploaded:
December 01, 2022
Shared:
December 01, 2022
Total Price:
$4.30
Truly minimal STM32G0/STM32C0 prototyping board
Truly minimal STM32G0/STM32C0 prototyping board
DMG-KGDU-10+
author: WormyPerksinX86
2 layer board of 2.01 x 2.39 inches (51.0 x 60.8 mm)
Uploaded:
November 30, 2022
Shared:
November 30, 2022
Total Price:
$24.00
NOTE: Order with the option: 2 oz copper, 0.8mm thickness!!!
DMG-KGDU-10+ is a replacement upgraded PCB for your USA versions of Pokemon Gold, Silver, and Crystal. It utilizes FRAM, and a 2 input OR gate IC.
More information and full BOM for this project on my github: https://github.com/LordxOs…
Show full description
NOTE: Order with the option: 2 oz copper, 0.8mm thickness!!!
DMG-KGDU-10+ is a replacement upgraded PCB for your USA versions of Pokemon Gold, Silver, and Crystal. It utilizes FRAM, and a 2 input OR gate IC.
More information and full BOM for this project on my github: https://github.com/LordxOs…
Show full description
upper-gerber
author: upper-rev-A
2 layer board of 1.65 x 2.80 inches (41.8 x 71.1 mm)
Uploaded:
November 30, 2022
Shared:
November 30, 2022
Total Price:
$23.00
containing blank proto area, majority of I/Os pin, connection to upper board.
containing blank proto area, majority of I/Os pin, connection to upper board.
NES_edge_v4-cart_2022-11-30
author: maker-schiller
2 layer board of 4.14 x 0.73 inches (105.2 x 18.5 mm)
Uploaded:
November 30, 2022
Shared:
November 30, 2022
Total Price:
$15.05
NESedge - put a 72 pin edge connector in your NES-001 moving cartridge tray. This board connects to the NES cartridge. You also need the board that connects to the NES Mainboard.
NESedge - put a 72 pin edge connector in your NES-001 moving cartridge tray. This board connects to the NES cartridge. You also need the board that connects to the NES Mainboard.
