Custom Identity Chip
author: ruthsarian
2 layer board of 0.83 x 1.10 inches (21.1 x 27.9 mm)
Uploaded:
June 08, 2023
Shared:
June 18, 2023
Total Price:
$4.55
This PCB is designed to be a custom identity chip for Tron Lightcycle Run devices that accept identity chips. A 150mil SOIC-8 SPI flash memory chip (i.e. Winbond W25Q16BV) should be mounted upside down into the center hole of the PCB.
The 0805 100nF (.1uF) capacitor and 10k resistor are located to act as the tab to pull on when removing the chip from its socket. 0603 components will also fit those pads.
This PCB has been tested only in an identity disc bluetooth speaker.
This PCB is designed to be a custom identity chip for Tron Lightcycle Run devices that accept identity chips. A 150mil SOIC-8 SPI flash memory chip (i.e. Winbond W25Q16BV) should be mounted upside down into the center hole of the PCB.
The 0805 100nF (.1uF) capacitor and 10k resistor are located to act as the tab to pull on when removing the chip from its socket. 0603 components will also fit those pads.
This PCB has been tested only in an identity disc bluetooth speaker.
