Shared Projects

Shared Projects

SmartPakku

author: resolutedreamer
Top
Bottom

2 layer board of 1.97 x 2.09 inches (50.0 x 53.0 mm)
Uploaded: January 21, 2015
Shared: February 16, 2015
Total Price: $20.55

Arduino Uno Shield for SmartPakku, the world's first smart backpack system: smartpakku.resolutedreamer.com

Arduino Uno Shield for SmartPakku, the world's first smart backpack system: smartpakku.resolutedreamer.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

INMP441.I2SMicrophone.v03

author: PeskyProducts
Top
Bottom

2 layer board of 3.44 x 0.39 inches (87.5 x 9.9 mm)
Uploaded: February 15, 2015
Shared: February 16, 2015
Total Price: $6.70

Test of INMP441 I2S microphone on flex cable.

Test of INMP441 I2S microphone on flex cable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

High power microcontroller controlled Lowside Fet swich

author: Dumle29
Top
Bottom

2 layer board of 2.19 x 1.86 inches (55.6 x 47.2 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $20.30

A board used to switch of a 12v load, after a certain amount of time, or on low battery voltage !!!NOT TESTED!!!

A board used to switch of a 12v load, after a certain amount of time, or on low battery voltage !!!NOT TESTED!!!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Resolution SMT 360 Breakout

author: gigneil
Top
Bottom

2 layer board of 1.26 x 1.03 inches (32.0 x 26.2 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $6.45

Based on the Sparkfun Copernicus II Dip Board

Based on the Sparkfun Copernicus II Dip Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Multicopter Custom Arms - ESC connection

author: depewke
Top
Bottom

2 layer board of 1.19 x 0.75 inches (30.1 x 19.0 mm)
Uploaded: January 01, 2015
Shared: February 15, 2015
Total Price: $4.40

Board to connect ESC and Nav light power and signal lines

Board to connect ESC and Nav light power and signal lines

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESC Calibration Board

author: depewke
Top
Bottom

2 layer board of 0.99 x 0.80 inches (25.1 x 20.3 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $3.90

quickly connects up to 8 ESCs to an RX for calibration

quickly connects up to 8 ESCs to an RX for calibration

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Zero BLE XBee V2.0

author: micahpearlman
Top
Bottom

2 layer board of 1.02 x 1.37 inches (25.8 x 34.7 mm)
Uploaded: February 03, 2015
Shared: February 15, 2015
Total Price: $6.90

HM-10 BLE to XBee breakout

HM-10 BLE to XBee breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Triple Ethernet Breakout

author: yakovdk
Top
Bottom

2 layer board of 3.36 x 1.90 inches (85.4 x 48.3 mm)
Uploaded: January 03, 2015
Shared: February 15, 2015
Total Price: $31.90

Breakout board with three ENC424J600s for using parallel interface.

Breakout board with three ENC424J600s for using parallel interface.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLF 10cc v2.03

author: Cereal_Killer
Top
Bottom

2 layer board of 0.40 x 0.40 inches (10.1 x 10.1 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $0.75

single side 10mm CC driver, for PIC or AVR!

single side 10mm CC driver, for PIC or AVR!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Heatermeter 4.2.4 Cat5 Connections

author: JohnB
Top
Bottom

2 layer board of 4.73 x 1.80 inches (120.0 x 45.7 mm)
Uploaded: February 03, 2015
Shared: February 15, 2015
Total Price: $42.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[outdated][untested][super-difficult] 10mm DD + single 7135 w/ LFPAK33 v008

author: Red
Top
Bottom

2 layer board of 0.40 x 0.40 inches (10.0 x 10.0 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $0.75

https://oshpark.com/shared_projects/WxbH4cRs

Don’t try this at home. Order one to cry over if you want.

Forum Thread: http://budgetlightforum.com/node/37726

https://oshpark.com/shared_projects/WxbH4cRs

Don’t try this at home. Order one to cry over if you want.

Forum Thread: http://budgetlightforum.com/node/37726

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Slip Ring Interface - High Current

author: flthymcnsty
Top
Bottom

2 layer board of 2.72 x 1.27 inches (69.1 x 32.3 mm)
Uploaded: January 26, 2015
Shared: February 15, 2015
Total Price: $17.25

The Slip Ring Interface boards utilize 4 slip ring wires on each of the two power rails to allow for higher currents. Board also has I2C (4 pins, D, C, 5V, G) and Serial (4 Pins, Tx, Rx, 5V, G) pins broken out. These 8 pins utilize one slip ring wire apiece and can also be used as one wishes. …

Show full description

The Slip Ring Interface boards utilize 4 slip ring wires on each of the two power rails to allow for higher currents. Board also has I2C (4 pins, D, C, 5V, G) and Serial (4 Pins, Tx, Rx, 5V, G) pins broken out. These 8 pins utilize one slip ring wire apiece and can also be used as one wishes. …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

INMP441.I2SMicrophone.v02

author: PeskyProducts
Top
Bottom

2 layer board of 0.71 x 0.31 inches (17.9 x 7.8 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $1.05

Invensense’s bottom-ported MEMS digital microphones with an embedded ASIC which directly outputs 24-bit I2S serial data without the need of a CODEC. Board is intended as an add-on to the Teensy 3.x.

Invensense’s bottom-ported MEMS digital microphones with an embedded ASIC which directly outputs 24-bit I2S serial data without the need of a CODEC. Board is intended as an add-on to the Teensy 3.x.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

555 Blinker v2

author: buildchimp
Top
Bottom

2 layer board of 0.98 x 0.98 inches (24.8 x 24.8 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $4.75

strobe LED

strobe LED

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3v3PowerSupply using TPS63020

author: hansaya
Top
Bottom

2 layer board of 1.23 x 0.80 inches (31.2 x 20.3 mm)
Uploaded: February 15, 2015
Shared: February 15, 2015
Total Price: $4.90

Switch Mode Power supply. TPS63020 chip, buck and boost to regulate the output at 3.3v. By changing the the two resistors output voltage can be changed.

Switch Mode Power supply. TPS63020 chip, buck and boost to regulate the output at 3.3v. By changing the the two resistors output voltage can be changed.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ACS712 current sensor v3

author: TorontoBuilder
Top
Bottom

2 layer board of 0.60 x 0.90 inches (15.3 x 22.9 mm)
Uploaded: February 06, 2015
Shared: February 14, 2015
Total Price: $2.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Foam cutter circuit

author: TorontoBuilder
Top
Bottom

2 layer board of 2.09 x 2.40 inches (53.0 x 61.0 mm)
Uploaded: February 13, 2015
Shared: February 14, 2015
Total Price: $25.05

Circuit board for variable output foam cutter using either a “short” 24" or “long” 48" Nichrome Wire.

Uses a SPST switch and a 5K Pot to adjust the power output. The SPST switch bypasses the 5 Ohm resistance when using the longer 48" length of Nichrome wire.

When using the shorter 24" wire …

Show full description

Circuit board for variable output foam cutter using either a “short” 24" or “long” 48" Nichrome Wire.

Uses a SPST switch and a 5K Pot to adjust the power output. The SPST switch bypasses the 5 Ohm resistance when using the longer 48" length of Nichrome wire.

When using the shorter 24" wire …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LM2575 5v regulator v3

author: TorontoBuilder
Top
Bottom

2 layer board of 0.95 x 1.32 inches (24.0 x 33.5 mm)
Uploaded: February 13, 2015
Shared: February 14, 2015
Total Price: $6.20

a 5v switching regulator

a 5v switching regulator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AirDrummers StickPCB

author: AirDrummers
Top
Bottom

2 layer board of 6.46 x 1.02 inches (164.1 x 25.8 mm)
Uploaded: February 14, 2015
Shared: February 14, 2015
Total Price: $32.80

Drumstick PCB

Drumstick PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[untested] [wip] 10mm LFPAK33 v003

author: Red
Top
Bottom

2 layer board of 0.40 x 0.40 inches (10.0 x 10.0 mm)
Uploaded: February 14, 2015
Shared: February 14, 2015
Total Price: $0.75

10mm DD driver.

Forum Thread: http://budgetlightforum.com/node/37725

10mm DD driver.

Forum Thread: http://budgetlightforum.com/node/37725

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy